1,160 research outputs found
Datacenter Traffic Control: Understanding Techniques and Trade-offs
Datacenters provide cost-effective and flexible access to scalable compute
and storage resources necessary for today's cloud computing needs. A typical
datacenter is made up of thousands of servers connected with a large network
and usually managed by one operator. To provide quality access to the variety
of applications and services hosted on datacenters and maximize performance, it
deems necessary to use datacenter networks effectively and efficiently.
Datacenter traffic is often a mix of several classes with different priorities
and requirements. This includes user-generated interactive traffic, traffic
with deadlines, and long-running traffic. To this end, custom transport
protocols and traffic management techniques have been developed to improve
datacenter network performance.
In this tutorial paper, we review the general architecture of datacenter
networks, various topologies proposed for them, their traffic properties,
general traffic control challenges in datacenters and general traffic control
objectives. The purpose of this paper is to bring out the important
characteristics of traffic control in datacenters and not to survey all
existing solutions (as it is virtually impossible due to massive body of
existing research). We hope to provide readers with a wide range of options and
factors while considering a variety of traffic control mechanisms. We discuss
various characteristics of datacenter traffic control including management
schemes, transmission control, traffic shaping, prioritization, load balancing,
multipathing, and traffic scheduling. Next, we point to several open challenges
as well as new and interesting networking paradigms. At the end of this paper,
we briefly review inter-datacenter networks that connect geographically
dispersed datacenters which have been receiving increasing attention recently
and pose interesting and novel research problems.Comment: Accepted for Publication in IEEE Communications Surveys and Tutorial
A Time-driven Data Placement Strategy for a Scientific Workflow Combining Edge Computing and Cloud Computing
Compared to traditional distributed computing environments such as grids,
cloud computing provides a more cost-effective way to deploy scientific
workflows. Each task of a scientific workflow requires several large datasets
that are located in different datacenters from the cloud computing environment,
resulting in serious data transmission delays. Edge computing reduces the data
transmission delays and supports the fixed storing manner for scientific
workflow private datasets, but there is a bottleneck in its storage capacity.
It is a challenge to combine the advantages of both edge computing and cloud
computing to rationalize the data placement of scientific workflow, and
optimize the data transmission time across different datacenters. Traditional
data placement strategies maintain load balancing with a given number of
datacenters, which results in a large data transmission time. In this study, a
self-adaptive discrete particle swarm optimization algorithm with genetic
algorithm operators (GA-DPSO) was proposed to optimize the data transmission
time when placing data for a scientific workflow. This approach considered the
characteristics of data placement combining edge computing and cloud computing.
In addition, it considered the impact factors impacting transmission delay,
such as the band-width between datacenters, the number of edge datacenters, and
the storage capacity of edge datacenters. The crossover operator and mutation
operator of the genetic algorithm were adopted to avoid the premature
convergence of the traditional particle swarm optimization algorithm, which
enhanced the diversity of population evolution and effectively reduced the data
transmission time. The experimental results show that the data placement
strategy based on GA-DPSO can effectively reduce the data transmission time
during workflow execution combining edge computing and cloud computing
A Lightweight, Non-intrusive Approach for Orchestrating Autonomously-managed Network Elements
Software-Defined Networking enables the centralized orchestration of data
traffic within a network. However, proposed solutions require a high degree of
architectural penetration. The present study targets the orchestration of
network elements that do not wish to yield much of their internal operations to
an external controller. Backpressure routing principles are used for deriving
flow routing rules that optimally stabilize a network, while maximizing its
throughput. The elements can then accept in full, partially or reject the
proposed routing rule-set. The proposed scheme requires minimal, relatively
infrequent interaction with a controller, limiting its imposed workload,
promoting scalability. The proposed scheme exhibits attracting network
performance gains, as demonstrated by extensive simulations and proven via
mathematical analysis.Comment: 6 pages 7, figures, IEEE ISCC'1
Recommended from our members
Measurement-Driven Algorithm and System Design for Wireless and Datacenter Networks
The growing number of mobile devices and data-intensive applications pose unique challenges for wireless access networks as well as datacenter networks that enable modern cloud-based services. With the enormous increase in volume and complexity of traffic from applications such as video streaming and cloud computing, the interconnection networks have become a major performance bottleneck. In this thesis, we study algorithms and architectures spanning several layers of the networking protocol stack that enable and accelerate novel applications and that are easily deployable and scalable. The design of these algorithms and architectures is motivated by measurements and observations in real world or experimental testbeds.
In the first part of this thesis, we address the challenge of wireless content delivery in crowded areas. We present the AMuSe system, whose objective is to enable scalable and adaptive WiFi multicast. AMuSe is based on accurate receiver feedback and incurs a small control overhead. This feedback information can be used by the multicast sender to optimize multicast service quality, e.g., by dynamically adjusting transmission bitrate. Specifically, we develop an algorithm for dynamic selection of a subset of the multicast receivers as feedback nodes which periodically send information about the channel quality to the multicast sender. Further, we describe the Multicast Dynamic Rate Adaptation (MuDRA) algorithm that utilizes AMuSe's feedback to optimally tune the physical layer multicast rate. MuDRA balances fast adaptation to channel conditions and stability, which is essential for multimedia applications.
We implemented the AMuSe system on the ORBIT testbed and evaluated its performance in large groups with approximately 200 WiFi nodes. Our extensive experiments demonstrate that AMuSe can provide accurate feedback in a dense multicast environment. It outperforms several alternatives even in the case of external interference and changing network conditions. Further, our experimental evaluation of MuDRA on the ORBIT testbed shows that MuDRA outperforms other schemes and supports high throughput multicast flows to hundreds of nodes while meeting quality requirements. As an example application, MuDRA can support multiple high quality video streams, where 90% of the nodes report excellent or very good video quality.
Next, we specifically focus on ensuring high Quality of Experience (QoE) for video streaming over WiFi multicast. We formulate the problem of joint adaptation of multicast transmission rate and video rate for ensuring high video QoE as a utility maximization problem and propose an online control algorithm called DYVR which is based on Lyapunov optimization techniques. We evaluated the performance of DYVR through analysis, simulations, and experiments using a testbed composed of Android devices and o the shelf APs. Our evaluation shows that DYVR can ensure high video rates while guaranteeing a low but acceptable number of segment losses, buffer underflows, and video rate switches.
We leverage the lessons learnt from AMuSe for WiFi to address the performance issues with LTE evolved Multimedia Broadcast/Multicast Service (eMBMS). We present the Dynamic Monitoring (DyMo) system which provides low-overhead and real-time feedback about eMBMS performance. DyMo employs eMBMS for broadcasting instructions which indicate the reporting rates as a function of the observed Quality of Service (QoS) for each UE. This simple feedback mechanism collects very limited QoS reports which can be used for network optimization. We evaluated the performance of DyMo analytically and via simulations. DyMo infers the optimal eMBMS settings with extremely low overhead, while meeting strict QoS requirements under different UE mobility patterns and presence of network component failures.
In the second part of the thesis, we study datacenter networks which are key enablers of the end-user applications such as video streaming and storage. Datacenter applications such as distributed file systems, one-to-many virtual machine migrations, and large-scale data processing involve bulk multicast flows. We propose a hardware and software system for enabling physical layer optical multicast in datacenter networks using passive optical splitters. We built a prototype and developed a simulation environment to evaluate the performance of the system for bulk multicasting. Our evaluation shows that the optical multicast architecture can achieve higher throughput and lower latency than IP multicast and peer-to-peer multicast schemes with lower switching energy consumption.
Finally, we study the problem of congestion control in datacenter networks. Quantized Congestion Control (QCN), a switch-supported standard, utilizes direct multi-bit feedback from the network for hardware rate limiting. Although QCN has been shown to be fast-reacting and effective, being a Layer-2 technology limits its adoption in IP-routed Layer 3 datacenters. We address several design challenges to overcome QCN feedback's Layer- 2 limitation and use it to design window-based congestion control (QCN-CC) and load balancing (QCN-LB) schemes. Our extensive simulations, based on real world workloads, demonstrate the advantages of explicit, multi-bit congestion feedback, especially in a typical environment where intra-datacenter traffic with short Round Trip Times (RTT: tens of s) run in conjunction with web-facing traffic with long RTTs (tens of milliseconds)
- …