Advanced methods in automatic modulation classification for emerging technologies

Modulation classification (MC) is of large importance in both military and commercial communication applications. It is a challenging problem, especially in non-cooperative wireless environments, where channel fading and no prior knowledge on the incoming signal are major factors that deteriorate the reception performance. Although the average likelihood ratio test method can provide an optimal solution to the MC problem with unknown parameters, it suffers from high computational complexity and in some cases mathematical intractability. Instead, in this research, an array-based quasi-hybrid likelihood ratio test (qHLRT) algorithm is proposed, which depicts two major advantages. First, it is simple yet accurate enough parameter estimation with reduced complexity. Second the incorporation of antenna arrays offers an effective ability to combat fading. Furthermore, a practical array-based qHLRT classifier scheme is implemented, which applies maximal ratio combining (MRC) to increase the accuracy of both carrier frequency offset (CFO) estimation and likelihood function calculation in channel fading. In fact, double CFO estimations are executed in this classifier. With the first the unknown CFO, phase offsets and amplitudes are estimated as prerequisite for MRC operation. Then, MRC is performed using these estimates, followed by a second CFO estimator. Since the input of the second CFO estimator is the output of the MRC, fading effects on the incoming signals are removed significantly and signal-to-noise ratio (SNR) is augmented. As a result, a more accurate CFO estimate is obtained. Consequently, the overall classification performance is improved, especially in low SNR environment. Recently, many state-of-the-arts communication technologies, such as orthogonal frequency division multiplexing (OFDM) modulations, have been emerging. The need for distinguishing OFDM signal from single carrier has become obvious. Besides, some vital parameters of OFDM signals should be extracted for further processing. In comparison to the research on MC for single carrier single antenna transmission, much less attention has been paid to the MC for emerging modulation methods. A comprehensive classification system is proposed for recognizing the OFDM signal and extracting its parameters. An automatic OFDM modulation classifier is proposed, which is based on the goodness-of-fittest. Since OFDM signal is Gaussian, Cramer-von Mises technique, working on the empirical distribution function, has been applied to test the presence of the normality. Numerical results show that such approach can successfully identify OFDM signals from single carrier modulations over a wide SNR range. Moreover, the proposed scheme can provide the acceptable performance when frequency-selective fading is present. Correlation test is then applied to estimate OFDM cyclic prefix duration. A two-phase searching scheme, which is based on Fast Fourier Transform (FFT) as well as Gaussianity test, is devised to detect the number of subcarriers. In the first phase, a coarse search is carried out iteratively. The exact number of subcarriers is determined by the fine tune in the second phase. Both analytical work and numerical results are presented to verify the efficiency of the proposed scheme

Low-cost blind carrier frequency offset estimator for mimo multicarrier systems

Master'sMASTER OF ENGINEERIN

Polynomial matrix decomposition techniques for frequency selective MIMO channels

For a narrowband, instantaneous mixing multi-input, multi-output (MIMO) communications system, the channel is represented as a scalar matrix. In this scenario, singular value decomposition (SVD) provides a number of independent spatial subchannels which can be used to enhance data rates or to increase diversity. Alternatively, a QR decomposition can be used to reduce the MIMO channel equalization problem to a set of single channel equalization problems. In the case of a frequency selective MIMO system, the multipath channel is represented as a polynomial matrix. Thus conventional matrix decomposition techniques can no longer be applied. The traditional solution to this broadband problem is to reduce it to narrowband form by using a discrete Fourier transform (DFT) to split the broadband channel into N narrow uniformly spaced frequency bands and applying scalar decomposition techniques within each band. This describes an orthogonal frequency division multiplexing (OFDM) based system. However, a novel algorithm has been developed for calculating the eigenvalue decomposition of a para-Hermitian polynomial matrix, known as the sequential best rotation (SBR2) algorithm. SBR2 and its QR based derivatives allow a true polynomial singular value and QR decomposition to be formulated. The application of these algorithms within frequency selective MIMO systems results in a fundamentally new approach to exploiting spatial diversity. Polynomial matrix decomposition and OFDM based solutions are compared for a wide variety of broadband MIMO communication systems. SVD is used to create a robust, high gain communications channel for ultra low signal-to-noise ratio (SNR) environments. Due to the frequency selective nature of the channels produced by polynomial matrix decomposition, additional processing is required at the receiver resulting in two distinct equalization techniques based around turbo and Viterbi equalization. The proposed approach is found to provide identical performance to that of an existing OFDM scheme while supporting a wider range of access schemes. This work is then extended to QR decomposition based communications systems, where the proposed polynomial approach is found to not only provide superior bit-error-rate (BER) performance but significantly reduce the complexity of transmitter design. Finally both techniques are combined to create a nulti-user MIMO system that provides superior BER performance over an OFDM based scheme. Throughout the work the robustness of the proposed scheme to channel state information (CSI) error is considered, resulting in a rigorous demonstration of the capabilities of the polynomial approach

Channel estimation for massive MIMO TDD systems assuming pilot contamination and flat fading

Channel estimation is crucial for massive massive multiple-input multiple-output (MIMO) systems to scale up multi-user (MU) MIMO, providing great improvement in spectral and energy efficiency. This paper presents a simple and practical channel estimator for multi-cell MU massive MIMO time division duplex (TDD) systems with pilot contamination in flat Rayleigh fading channels, i.e., the gains of the channels follow the Rayleigh distribution. We also assume uncorrelated antennas. The proposed estimator addresses performance under moderate to strong pilot contamination without previous knowledge of the cross-cell large-scale channel coefficients. This estimator performs asymptotically as well as the minimum mean square error (MMSE) estimator with respect to the number of antennas. An approximate analytical mean square error (MSE) expression is also derived for the proposed estimator

Channel estimation for massive MIMO TDD systems assuming pilot contamination and flat fading

Channel estimation is crucial for massive massive multiple-input multiple-output (MIMO) systems to scale up multi-user (MU) MIMO, providing great improvement in spectral and energy efficiency. This paper presents a simple and practical channel estimator for multi-cell MU massive MIMO time division duplex (TDD) systems with pilot contamination in flat Rayleigh fading channels, i.e., the gains of the channels follow the Rayleigh distribution. We also assume uncorrelated antennas. The proposed estimator addresses performance under moderate to strong pilot contamination without previous knowledge of the cross-cell large-scale channel coefficients. This estimator performs asymptotically as well as the minimum mean square error (MMSE) estimator with respect to the number of antennas. An approximate analytical mean square error (MSE) expression is also derived for the proposed estimator201