On some spectral properties of TanDEM-X interferograms over forested areas

This letter reports about some obervations over rainforest (in Brazil and Indonesia), where the spectra of TanDEM-X interferograms show distinct features, almost a signature, which is explained and modelled in terms of the scattering properties. Supported by comparisons with simulations, the observations exclude any homogeneous, horizontally-layered forest; instead, they are compatible with a model with point scatterers clustered in clouds. Such a model, with high extinction and large gaps that allow significant penetration, is able to explain to a good degree the observations

Indian earth observation programme towards societal benefits: GEOSS perspective

Indian Earth Observation (EO) Programme, since its inception has been applications driven and national development has been its main motivation. In order to meet the observational requirements of many societal benefit areas, a series of EO systems have been launched in both polar and geo synchronous orbits. Starting from Bhaskara, the first experimental EO satellite in 1979 to Cartosat-1 successfully launched in May 2005, a large number of sensors operating in optical and microwave spectral regions, providing data at resolutions ranging from 1 km to a meter have been built and flown. Data reception and processing facilities have been established not only in the country but also at various international ground stations. Remotely sensed data and its derived information have become an integral component of the National Natural Resources Management System (NNRMS), a unique concept evolved and established in the country. The paper discusses the evolution of IRS satellite systems, application programmes in different societal benefit areas and the road ahead. How it complements and supplements the international efforts in the context of Global Earth Observation System of Systems has also been indicated

Calibration and Signal Processing of Airborne Stand Profile Radar used in forest inventory

TomoRadar is a helicopter/UAV (Unmanned Aerial Vehicle) based FM-CW microwave ranging radar designed for the forest inventory. Developed by FGI (Finnish Geospatial Research Institute), TomoRadar can scan forest with Ku-band signals and then receive the backscatter signal from targets. The target distance can be figured out from the backscattered signal. Furthermore, various information around forest can be evaluated. As a ranging scatterometer the system calibration and signal processing are necessary and critical tasks. In This thesis, these two major problems are researched and solved. The system calibration is limited to complete on ground and restricted in a particular range despite TomoRadar works on helicopter. Thus the range calibration experiment is conducted on the ground test field with a Luneburg lens. Besides, power calibration of system backscatter signal is researched through electrical component tests. The linearity of the radar system frequency sweep is critical in FM-CW radars. Hence, it is studied in this thesis. When TomoRadar works, the output of the whole system is analog signal in intimidate frequency (IF) band. A digitizer samples and records the output analog signal. With these signal, the information around forest cannot be obtained. To draw stand profile of forest and research forest information, the IF band signals need to be further processed. This is signal processing part of the thesis work. As a result of this thesis work, TomoRadar range calibration was achieved. The calibration results were verified by the helicopter based flying tests. The results present that the calibration completed on ground test field applied with the situation that TomoRadar works in air and scans targets in long distance. The linearity of system frequency sweep generated by DDS (Direct Digital Synthesizer) is verified. Finally, the test forest backscattered data was processed and the ranges were evaluated. Some targets stand profiles are generated and presented in this thesi

Estimation of Canopy Height Using an Airborne Ku-Band Frequency-Modulated Continuous Waveform Profiling Radar

An airborne Ku-band frequency-modulated continuous waveform (FMCW) profiling radar terms as Tomoradar provides a distance-resolved measure of microwave radiation backscattered from the canopy surface and the underlying ground. The Tomoradar waveform data are acquired in the southern Boreal Forest Zone with Scots pine, Norway spruce, and birch as major species in Finland. A weighted filtering algorithm based on statistical properties of noise is designed to process the original waveform. In addition, another algorithm of estimating canopy height for the processed waveform is developed by extracting the canopy top and ground position. A higher-precision reference data from a Velodyne VLP-16 laser scanner and a digital terrain model are introduced to validate the accuracy of extracted canopy height. According to the processed results from 127 765 copolarization measurements in 32 stripes of Tomoradar field test, the mean error of canopy height varies from-0.04 to 1.53 m, and the root-mean-square error approximates 1 m. Moreover, the estimated canopy heights highly correlate with the reference data in view of that the correlation coefficients maintain from 0.86 to 0.99 with an average value of 0.96. All these results demonstrate that Tomoradar presents an important approach in estimating the canopy height with several meters footprint and is feasible of being a validation instrument for satellite LiDAR with large footprint in the forest inventory.</p

Integrating Vegetation Indices Models and Phenological Classification with Composite SAR and Optical Data for Cereal Yield Estimation in Finland (Part I)

Special Issue Microwave Remote Sensing.Abstract: During 1996–2006 the Ministry of Agriculture and Forestry in Finland, MTT Agrifood Research Finland and the Finnish Geodetic Institute carried out a joint remote sensing satellite research project. It evaluated the applicability of composite multispectral SAR and optical satellite data for cereal yield estimations in the annual crop inventory program. Three Vegetation Indices models (VGI, Infrared polynomial, NDVI and Composite multispetral SAR and NDVI) were validated to estimate cereal yield levels using solely optical and SAR satellite data (Composite Minimum Dataset). The average R2 for cereal yield (yb) was 0.627. The averaged composite SAR modeled grain yield level was 3,750 kg/ha (RMSE = 10.3%, 387 kg/ha) for high latitude spring cereals (4,018 kg/ha for spring wheat, 4,037 kg/ha for barley and 3,151 kg/ha for oats). Keywords: Composite multispectral modeling; SAR; classification; SatPhenClass algorithm; minimum dataset; cereal yield; phenology; LAI-bridge; CAP; IACS; FLPISPeer reviewe

Indian Earth Observation Programme towards Societal Benefits: GEOSS Perspective

ABSTRACT Indian Earth Observation (EO) programme, since its inception has been applications driven and national development has been its main motivation. In order to meet the observational requirements of many societal benefit areas, a series of EO systems have been launched in both polar and geo synchronous orbits. Starting from Bhaskara, the first experimental EO satellite in 1979 to Cartosat-1 successfully launched in May 2005, a large number of sensors operating in optical and microwave spectral regions, providing data at resolutions ranging from 1 km to a meter have been built and flown. Data reception and processing facilities have been established not only in the country but also at various international ground stations. Remotely sensed data and its derived information have become an integral component of the National Natural Resources Management System (NNRMS), a unique concept evolved and established in the country. The paper discusses the evolution of IRS satellite systems, application programmes in different societal benefit areas and the road ahead. How it complements and supplements the international efforts in the context of Global Earth Observation System of Systems has also been indicated

Earth resources: A continuing bibliography with indexes

This bibliography lists 579 reports, articles, and other documents introduced into the NASA scientific and technical information system. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, hydrology and water management, data processing and distribution systems, instrumentation and sensors, and economical analysis

Earth resources: A continuing bibliography with indexes (issue 51)

This bibliography lists 382 reports, articles and other documents introduced into the NASA scientific and technical information system between July 1 and September 30, 1986. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, hydrology and water management, data processing and distribution systems, instrumentation and sensors, and economic analysis

Earth Resources: A continuing bibliography with indexes, issue 20

This bibliography lists 273 reports, articles, and other documents introduced into the NASA scientific and technical information system between October 1 and December 31, 1978. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, hydrology and water management, data processing and distribution systems, instrumentation and sensors, and economic analysis

Earth Resources, A Continuing Bibliography with Indexes

This bibliography lists 460 reports, articles and other documents introduced into the NASA scientific and technical information system between July 1 and September 30, 1984. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, hydrology and water management, data processing and distribution systems, instrumentation and sensors, and economical analysis