The Class-E/F Family of ZVS Switching Amplifiers

A new family of switching amplifiers, each member having some of the features of both class E and inverse F, is introduced. These class-E/F amplifiers have class-E features such as incorporation of the transistor parasitic capacitance into the circuit, exact truly switching time-domain solutions, and allowance for zero-voltage-switching operation. Additionally, some number of harmonics may be tuned in the fashion of inverse class F in order to achieve more desirable voltage and current waveforms for improved performance. Operational waveforms for several implementations are presented, and efficiency estimates are compared to class-E

The re-emission spectrum of digital hardware subjected to EMI

The emission spectrum of digital hardware under the influence of external electromagnetic interference is shown to contain information about the interaction of the incident energy with the digital circuits in the system. The generation mechanism of the re-emission spectrum is reviewed, describing how nonlinear effects may be a precursor to the failure of the equipment under test. Measurements on a simple circuit are used to demonstrate how the characteristics of the re-emission spectrum may be correlated with changes to the digital waveform within the circuit. The technique is also applied to a piece of complex digital hardware where Similar, though more subtle, effects can be measured. It is shown that the re-emission spectrum can be used to detect the interaction of the interference with the digital devices at a level well below that which is able to cause static failures in the circuits. The utility of the technique as a diagnostic tool for immunity testing of digital hardware, by identifying which subsystems are being affected by external interference, is also demonstrated

A smart radar absorber based on the phase-switched screen

Although conventional (i.e., passive) radar absorbers are widely used for modifying the radar cross-section (RCS) of current military platforms, such absorbers may not have adequate performance to satisfy future requirements. Active absorbers, however, offer the potential to overcome the so-called Rozanov performance limit and to enable additional smart functionality such as monitoring damage, adaptive control of RCS or target appearance, identification-friend-or-foe, and absorb-while-scan. This paper outlines the concept and basic properties of a novel type of active radar absorber, the so-called phase-switched screen (PSS). The basic PSS topology is then modified so as to enable it to operate as a smart radar absorber when used together with an external sensor and feedback control loop. System implementation issues and the optimum choice of design parameters for a range of operational scenarios are discussed, and theoretical predictions are supported by measured performance data

Nonlinear Design Technique for High-Power Switching-Mode Oscillators

A simple nonlinear technique for the design of high-efficiency and high-power switching-mode oscillators is presented. It combines existing quasi-nonlinear methods and the use of an auxiliary generator (AG) in harmonic balance. The AG enables the oscillator optimization to achieve high output power and dc-to-RF conversion efficiency without affecting the oscillation frequency. It also imposes a sufficient drive on the transistor to enable the switching-mode operation with high efficiency. Using this AG, constant-power and constant-efficiency contour plots are traced in order to determine the optimum element values. The oscillation startup condition and the steady-state stability are analyzed with the pole-zero identification technique. The influence of the gate bias on the output power, efficiency, and stability is also investigated. A class-E oscillator is demonstrated using the proposed technique. The oscillator exhibits 75 W with 67% efficiency at 410 MHz

A circuit modeling technique for the ISO 7637-3 capacitive coupling clamp test

In this paper, we propose a transmission-line modeling technique for the ISO 7637-3 capacitive coupling clamp (CCC) test. Besides modeling the test bench, special attention is devoted to the CCC itself, for which an equivalent circuit is constructed based on the concept of surface transfer impedance and surface transfer admittance. The overall model is validated by means of measurements using a nonlinear circuit as device-under-test, as such demonstrating the appositeness to mimick the CCC test in simulations during the design phase

Efficient Fast-Convolution-Based Waveform Processing for 5G Physical Layer

This paper investigates the application of fast-convolution (FC) filtering schemes for flexible and effective waveform generation and processing in the fifth generation (5G) systems. FC-based filtering is presented as a generic multimode waveform processing engine while, following the progress of 5G new radio standardization in the Third-Generation Partnership Project, the main focus is on efficient generation and processing of subband-filtered cyclic prefix orthogonal frequency-division multiplexing (CP-OFDM) signals. First, a matrix model for analyzing FC filter processing responses is presented and used for designing optimized multiplexing of filtered groups of CP-OFDM physical resource blocks (PRBs) in a spectrally well-localized manner, i.e., with narrow guardbands. Subband filtering is able to suppress interference leakage between adjacent subbands, thus supporting independent waveform parametrization and different numerologies for different groups of PRBs, as well as asynchronous multiuser operation in uplink. These are central ingredients in the 5G waveform developments, particularly at sub-6-GHz bands. The FC filter optimization criterion is passband error vector magnitude minimization subject to a given subband band-limitation constraint. Optimized designs with different guardband widths, PRB group sizes, and essential design parameters are compared in terms of interference levels and implementation complexity. Finally, extensive coded 5G radio link simulation results are presented to compare the proposed approach with other subband-filtered CP-OFDM schemes and time-domain windowing methods, considering cases with different numerologies or asynchronous transmissions in adjacent subbands. Also the feasibility of using independent transmitter and receiver processing for CP-OFDM spectrum control is demonstrated

Space Telecommunications Radio System (STRS) Architecture Standard. Release 1.02.1

This document contains the NASA architecture standard for software defined radios used in space- and ground-based platforms to enable commonality among radio developments to enhance capability and services while reducing mission and programmatic risk. Transceivers (or transponders) with functionality primarily defined in software (e.g., firmware) have the ability to change their functional behavior through software alone. This radio architecture standard offers value by employing common waveform software interfaces, method of instantiation, operation, and testing among different compliant hardware and software products. These common interfaces within the architecture abstract application software from the underlying hardware to enable technology insertion independently at either the software or hardware layer

Time-Delay Multiplexing of Two Beams in a Terahertz Imaging Radar

We demonstrate a time-delay multiplexing technique that doubles the frame rate of a 660–690-GHz imaging radar with minimal additional instrument complexity. This is done by simultaneously projecting two offset, orthogonally polarized radar beams generated and detected by a common source and receiver. Beam splitting and polarization rotation is accomplished with a custom designed waveguide hybrid coupler and twist. A relative time lag of approximately 2 ns between the beams’ waveforms is introduced using a quasi-optical delay line, followed by spatial recombination using a selectively reflective wire grid. This delay is much longer than the approximately 20-ps time-of-flight resolution of the 30-GHz bandwidth radar, permitting the two beams’ reflected signals from a compact target to be easily distinguished in digital post-processing of the single receiver channel

Improved SuperDARN radar signal processing: A first principles statistical approach for reliable measurement uncertainties and enhanced data products

Ground-based radar systems are the best way to continuously monitor medium-to-large-scale features of the near-Earth space environment on a global scale. The Super Dual Auroral Radar Network (SuperDARN) radars are used to image the high-latitude ionospheric plasma circulation, which is produced by magnetosphere-ionosphere coupling processes generated by the interaction of both the solar and terrestrial magnetic fields. While investigating ways to expand the usable data products of SuperDARN to include electron density inferred using a multiple-frequency technique, it was determined that SuperDARN error estimates were lacking sufficient rigour. The method to calculate SuperDARN parameters was developed approximately 25 years ago when available computing resources were significantly less powerful, which required a number of simplifications to ensure both valid data and reasonable processing time. This resulted in very conservative criteria being applied to ensure valid data, but at the expense of both rigorous error analysis and the elimination of some otherwise valid data. With access to modern computing resources, the SuperDARN data processing methodology can be modernized to provide proper error estimates for the SuperDARN parameters (power, drift velocity, width). This research has resulted in 3 publications, which are presented here as Chapters 5, 6, and 7. The error analysis started with a first principles analysis of the self-clutter generated by the multiple-pulse technique that is used to probe the ionosphere (Chapter 5). Next, the statistical properties of voltage fluctuations as measured by SuperDARN were studied and the variance of these measurements were derived (Chapter 6). Finally, the statistical error analysis was propagated to the standard SuperDARN data products using a new First-Principles Fitting Methodology (Chapter 7). These results can be applied to all previously recorded SuperDARN data and have shown a practical increase in data of >50%. This has significant impact on the SuperDARN and space science communities with respect to, for example, global convection maps and their use in global modelling efforts. These results also enable quantitative experiment design facilitating research into using SuperDARN to provide electron density measurements, with a preliminary investigation using the new SuperDARN fitting methodology presented in Chapter 8