1,021 research outputs found
Evolving SDN for Low-Power IoT Networks
Software Defined Networking (SDN) offers a flexible and scalable architecture
that abstracts decision making away from individual devices and provides a
programmable network platform. However, implementing a centralized SDN
architecture within the constraints of a low-power wireless network faces
considerable challenges. Not only is controller traffic subject to jitter due
to unreliable links and network contention, but the overhead generated by SDN
can severely affect the performance of other traffic. This paper addresses the
challenge of bringing high-overhead SDN architecture to IEEE 802.15.4 networks.
We explore how traditional SDN needs to evolve in order to overcome the
constraints of low-power wireless networks, and discuss protocol and
architectural optimizations necessary to reduce SDN control overhead - the main
barrier to successful implementation. We argue that interoperability with the
existing protocol stack is necessary to provide a platform for controller
discovery and coexistence with legacy networks. We consequently introduce
{\mu}SDN, a lightweight SDN framework for Contiki, with both IPv6 and
underlying routing protocol interoperability, as well as optimizing a number of
elements within the SDN architecture to reduce control overhead to practical
levels. We evaluate {\mu}SDN in terms of latency, energy, and packet delivery.
Through this evaluation we show how the cost of SDN control overhead (both
bootstrapping and management) can be reduced to a point where comparable
performance and scalability is achieved against an IEEE 802.15.4-2012 RPL-based
network. Additionally, we demonstrate {\mu}SDN through simulation: providing a
use-case where the SDN configurability can be used to provide Quality of
Service (QoS) for critical network flows experiencing interference, and we
achieve considerable reductions in delay and jitter in comparison to a scenario
without SDN
Performance Comparison of the RPL and LOADng Routing Protocols in a Home Automation Scenario
RPL, the routing protocol proposed by IETF for IPv6/6LoWPAN Low Power and
Lossy Networks has significant complexity. Another protocol called LOADng, a
lightweight variant of AODV, emerges as an alternative solution. In this paper,
we compare the performance of the two protocols in a Home Automation scenario
with heterogenous traffic patterns including a mix of multipoint-to-point and
point-to-multipoint routes in realistic dense non-uniform network topologies.
We use Contiki OS and Cooja simulator to evaluate the behavior of the
ContikiRPL implementation and a basic non-optimized implementation of LOADng.
Unlike previous studies, our results show that RPL provides shorter delays,
less control overhead, and requires less memory than LOADng. Nevertheless,
enhancing LOADng with more efficient flooding and a better route storage
algorithm may improve its performance
RPL Routing Protocol a case study: Precision agriculture
International audienceThe routing protocol for low power and lossy network (RPL) was designed in the ROLL working group at IETF since the year of 2008. Until the latest version of draft 19 released, this protocol algorithms and its four application scenario, such as home automation, industrial control, urban environment and building automation, have been nearly grounded. However, it is still very difficult to find effective approaches to simulate and evaluate RPL's behavior and other extensions of its application. In this paper, first we provide a brief presentation of the RPL protocol including two case studies ContikiRPL and TinyRPL, and an initial simulation experiment results obtained from the RPL capable COOJA simulator and its developed module. Second we then focus on the utilization of this protocol in the precision agriculture area and propose our dedicated instances hybrid network architecture to meet the specific requirement of this application. As a conclusion, we summarized our ongoing work and future solutions of the current technology issues
Mobile Networking
We point out the different performance problems that need to be addressed when considering mobility in IP networks. We also define the reference architecture and present a framework to classify the different solutions for mobility management in IP networks. The performance of the major candidate micro-mobility solutions is evaluated for both real-time (UDP) and data (TCP) traffic through simulation and by means of an analytical model. Using these models we compare the performance of different mobility management schemes for different data and real-time services and the network resources that are needed for it. We point out the problems of TCP in wireless environments and review some proposed enhancements to TCP that aim at improving TCP performance. We make a detailed study of how some of micro-mobility protocols namely Cellular IP, Hawaii and Hierarchical Mobile IP affect the behavior of TCP and their interaction with the MAC layer. We investigate the impact of handoffs on TCP by means of simulation traces that show the evolution of segments and acknowledgments during handoffs.Publicad
IETF standardization in the field of the Internet of Things (IoT): a survey
Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there have been many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. In this paper, we will briefly review the history of integrating constrained devices into the Internet, followed by an extensive overview of IETF standardization work in the 6LoWPAN, ROLL and CoRE working groups. This is complemented with a broad overview of related research results that illustrate how this work can be extended or used to tackle other problems and with a discussion on open issues and challenges. As such the aim of this paper is twofold: apart from giving readers solid insights in IETF standardization work on the Internet of Things, it also aims to encourage readers to further explore the world of Internet-connected objects, pointing to future research opportunities
A RPL based adaptive and scalable data-collection protocol module for NS-3 simulation platform
International audienceThis paper presents data-collection protocol framework based on RPL (IPv6 Routing Protocol for Low Power and Lossy Networks) for NS-3 (Network Simulator 3) simulation platform. Its design, implementation, simple examples of operations and evaluations will also be demonstrated. The conclusions and future developments are located in the final part of this paper
Simulation of the RPL Routing Protocol for IPv6 Sensor Networks: two cases studies
International audienceThe routing protocol for low power and lossy networks (RPL) was recently designed in the ROLL working group at IETF. Few simulation tools exist that enable its evaluation in order to prepare for its real deployment. In this paper, we provide a new evaluation of this protocol with two approaches using two different simulators adapted to our needs. We first evaluated the value of mobile sinks in wireless sensor networks to extend the network lifetime using a sensor network simulator, WSNet, augmented by our own RPL module. We then focus on the performance comparison of simulated sensor networks and real powerline communication networks (PLC) using the RPL capable COOJA simulator augmented by our own PLC module. In each case, we justify the simulator choice, describe the tools implemented and present the obtained results. Our studies give two new RPL evaluations and show the interest of choosing a simulation tool adapted to the targeted study with the associated software developments. As a conclusion, we demonstrated how these two case studies can be combined in a heterogeneous network architecture to extend its global lifetime
Atomic-SDN: Is Synchronous Flooding the Solution to Software-Defined Networking in IoT?
The adoption of Software Defined Networking (SDN) within traditional networks
has provided operators the ability to manage diverse resources and easily
reconfigure networks as requirements change. Recent research has extended this
concept to IEEE 802.15.4 low-power wireless networks, which form a key
component of the Internet of Things (IoT). However, the multiple traffic
patterns necessary for SDN control makes it difficult to apply this approach to
these highly challenging environments. This paper presents Atomic-SDN, a highly
reliable and low-latency solution for SDN in low-power wireless. Atomic-SDN
introduces a novel Synchronous Flooding (SF) architecture capable of
dynamically configuring SF protocols to satisfy complex SDN control
requirements, and draws from the authors' previous experiences in the IEEE EWSN
Dependability Competition: where SF solutions have consistently outperformed
other entries. Using this approach, Atomic-SDN presents considerable
performance gains over other SDN implementations for low-power IoT networks. We
evaluate Atomic-SDN through simulation and experimentation, and show how
utilizing SF techniques provides latency and reliability guarantees to SDN
control operations as the local mesh scales. We compare Atomic-SDN against
other SDN implementations based on the IEEE 802.15.4 network stack, and
establish that Atomic-SDN improves SDN control by orders-of-magnitude across
latency, reliability, and energy-efficiency metrics
Supporting Cyber-Physical Systems with Wireless Sensor Networks: An Outlook of Software and Services
Sensing, communication, computation and control technologies are the essential building blocks of a cyber-physical system (CPS). Wireless sensor networks (WSNs) are a way to support CPS as they provide fine-grained spatial-temporal sensing, communication and computation at a low premium of cost and power. In this article, we explore the fundamental concepts guiding the design and implementation of WSNs. We report the latest developments in WSN software and services for meeting existing requirements and newer demands; particularly in the areas of: operating system, simulator and emulator, programming abstraction, virtualization, IP-based communication and security, time and location, and network monitoring and management. We also reflect on the ongoing
efforts in providing dependable assurances for WSN-driven CPS. Finally, we report on its applicability with a case-study on smart buildings
- …