Design and implementation of an ETSI-SDR OFDM transmitter with power amplifier linearizer

Satellite radio has attained great popularity because of its wide range of geographical coverage and high signal quality as compared to the terrestrial broadcasts. Most Satellite Digital Radio (SDR) based systems favor multi-carrier transmission schemes, especially, orthogonal frequency division multiplexing (OFDM) transmission because of high data transfer rate and spectral efficiency. It is a challenging task to find a suitable platform that supports fast data rates and superior processing capabilities required for the development and deployment of the new SDR standards. Field programmable gate array (FPGA) devices have the potential to become suitable development platform for such standards. Another challenging factor in SDR systems is the distortion of variable envelope signals used in OFDM transmission by the nonlinear RF power amplifiers (PA) used in the base station transmitters. An attractive option is to use a linearizer that would compensate for the nonlinear effects of the PA. In this research, an OFDM transmitter, according to European Telecommunications Standard Institute (ETSI) SDR Technical Specifications 2007-2008, was designed and implemented on a low-cost Xilinx FPGA platform. A weakly nonlinear PA, operating in the L-band SDR frequency (1.450-1.490GHz), was used for signal transmission. An FPGA-based, low-cost, adaptive linearizer was designed and implemented based on the digital predistortion (DPD) reference design from Xilinx, to correct the distortion effects of the PA on the transmitted signal

SatCom Today in Canada: Significant Research: Broadband Satellite Communications List of CITR related Publications (1998-2003)

Journal Papers Conference Papers Contributions to Standards Canadian Space Agency Recent Publication

Enhanced Multicarrier Techniques for Professional Ad-Hoc and Cell-Based Communications (EMPhAtiC) Document Number D3.3 Reduction of PAPR and non linearities effects

Livrable d'un projet Européen EMPHATICLike other multicarrier modulation techniques, FBMC suffers from high peak-to-average power ratio (PAPR), impacting its performance in the presence of a nonlinear high power amplifier (HPA) in two ways. The first impact is an in-band distortion affecting the error rate performance of the link. The second impact is an out-of-band effect appearing as power spectral density (PSD) regrowth, making the coexistence between FBMC based broad-band Professional Mobile Radio (PMR) systems with existing narrowband systems difficult to achieve. This report addresses first the theoretical analysis of in-band HPA distortions in terms of Bit Error Rate. Also, the out-of band impact of HPA nonlinearities is studied in terms of PSD regrowth prediction. Furthermore, the problem of PAPR reduction is addressed along with some HPA linearization techniques and nonlinearity compensation approaches

Analysis and Compensation of Power Amplifier Distortions in Wireless Communication Systems

Wireless communication devices transmit message signals which should possess desirable power levels for quality transmission. Power amplifiers are devices in the wireless transmitters which increase the power of signals to the desired levels, but produce nonlinear distortions due to their saturation property, resulting in degradation of the quality of the transmitted signal. This thesis talks about the analysis and performance of communication systems in presence of power amplifier nonlinear distortions. First, the thesis studies the effects of power amplifier nonlinear distortions on communication signals and proposes a simplified design for identification and compensation of the distortions at the receiver end of a wireless communication system using a two-step pilot signal approach. Step one involves the estimation of the channel state information of the wireless channel and step two estimates the power amplifier parameters. Then, the estimated power amplifier parameters are used for transmitter identification with the help of a testing procedure proposed in this thesis. With the evolution of millimeter wave wireless communication systems today, study and analysis of these systems is the need of the hour. Thus, the second part of this thesis is extended to study the performance of millimeter wave wireless communication systems in presence of power amplifier nonlinear distortions and derives an analytical expression for evaluation of the symbol error probability for this system. The proposed analysis evaluates the performance of millimeter wave systems theoretically without the need of simulations, and is helpful in studying systems in the absence of actual hardware

Multi look-up table FPGA implementation of an adaptive digital predistorter for linearizing RF power amplifiers with memory effects

This paper presents a hardware implementation of a digital predistorter (DPD) for linearizing RF power amplifiers (PAs) for wideband applications. The proposed predistortion linearizer is based on a nonlinear auto-regressive moving average (NARMA) structure, which can be derived from the NARMA PA behavioral model and then mapped into a set of scalable lookup tables (LUTs). The linearizer takes advantage of its recursive nature to relax the LUT count needed to compensate memory effects in PAs. Experimental support is provided by the implementation of the proposed NARMA DPD in a field-programmable gate-array device to linearize a 170-W peak power PA, validating the recursive DPD NARMA structure for W-CDMA signals and flexible transmission bandwidth scenarios. To the best of the authors’ knowledge, it is the first time that a recursive structure is experimentally validated for DPD purposes. In addition to the results on PA efficiency and linearity, this paper addresses many practical implementation issues related to the use of FPGA in DPD applications, giving an original insight on actual prototyping scenarios. Finally, this study discusses the possibility of further enhancing the overall efficiency by degrading the PA operation mode, provided that DPD may be unavoidable due to the impact of memory effects.Peer Reviewe

Multicarrier communication systems with low sensibility to nonlinear amplification

Actualment estem entrant a una nova era de la informació amb gran demanda de sistemes de comunicació sense fils. Nous serveis com dades i video requereixen transmissions fiables d'alta velocitat, fins i tot en escenaris d'alta mobilitat. A més a més, la dificultat d'assignar el limitat espectre radioelèctric juntament amb la necessitat d'incrementar el temps de vida de les bateries dels terminals mòbils, requereix el diseny de transceptors que usin la potència i l'ampla de banda disponibles de manera eficient. Les comunicacions multiportadora basades en OFDM són capaces de satisfer la majoria d'aquests requeriments. Però, entre altres reptes, reduir la sensibilitat a la amplificació no-lineal és un factor clau durant el diseny. En aquesta tesi doctoral s'analitza la sensibilitat dels sistemes multiportadora basats en OFDM a l'amplificació no-lineal i es consideren formes eficients per superar aquest problema. La tesi s'enfoca principalment al problema de reduir les fluctuacions de l'envolupant del senyal transmès. En aquest sentit es presenta també un estudi de les mètriques de l'envolupant del senyal, PAPR i CM. A més a més, basant-nos en l'anàlisis presentat es proposen noves tècniques per sistemes OFDM i MC-SS. Per MC-SS, també es tracta el diseny d'una tècnica de postprocessament en forma de detector multiusuari per canals no-lineals.Actualmente estamos entrando en una nueva era de la información donde se da una gran demanda de sistemas de comunicación inalámbricos. Nuevos servicios como datos y vídeo requieren transmisiones fiables de alta velocidad, incluso en escenarios de alta movilidad. Además, la dificultad de asignar el limitado espectro radioeléctrico junto con la necesidad de incrementar el tiempo de vida de las baterías de los terminales móviles, requiere el diseño de transceptores que usen eficientemente la potencia y el ancho de banda disponibles. Las comunicaciones multiportadora basadas en OFDM son capaces de satisfacer la mayoría de dichos requerimientos. Sin embargo, entre otros retos, reducir su sensibilidad a la amplificación no-lineal es un factor clave durante el diseño. En esta tesis se analiza la sensibilidad de los sistemas multiportadora basados en OFDM a la amplificación no-lineal y se consideran formas eficientes para superar dicho problema. La tesis se enfoca principalmente al problema de reducir las fluctuaciones de la envolvente. En este sentido también se presenta un estudio de las métricas de la señal, PAPR y CM. Además, basándonos en el análisis presentado se proponen nuevas técnicas para OFDM y MC-SS. Para MC-SS, también se trata el diseño de un detector multiusuario para canales no-lineales.We are now facing a new information age with high demand of wireless communication systems. New services such as data and video require achieving reliable high-speed transmissions even in high mobility scenarios. Moreover, the difficulty to allocate so many wireless communication systems in the limited frequency band in addition to the demand for long battery life requires designing spectrum and power efficient transceivers. Multicarrier communications based on OFDM are known to fulfill most of the requirements of such systems. However, among other challenges, reducing the sensitivity to nonlinear amplification has become a design key. In this thesis the sensitivity of OFDM-based multicarrier systems to nonlinear amplification is analyzed and efficient ways to overcome this problem are considered. The focus is mainly on the problem of reducing the envelope fluctuations. Therefore, a study of the signal metrics, namely PAPR and CM, is also presented. From the presented analysis, several new techniques for OFDM and MC-SS are proposed. For MC-SS, the design of a post-processing technique in the form of a multiuser detector for nonlinearly distorted MC-SS symbols is also addressed

Design and Linearization of Energy Efficiency Power Amplifier in Nonlinear OFDM Transmitter for LTE-5G Applications. Simulation and measurements of energy efficiency power amplifier in the presence of nonlinear OFDM transmitter system and digital predistortion based on Hammerstein-Wiener method

This research work has made an effort to understand a novel line of radio frequency power amplifiers (RFPAs) that address initiatives for efficiency enhancement and linearity compensation to harmonize the fifth generation (5G) campaign. The objective is to enhance the performance of an orthogonal frequency division multiplexing-long term evolution (OFDM-LTE) transmitter by reducing the nonlinear distortion of the RFPA. The first part of this work explores the design and implementation of 15.5 W class AB RF power amplifier, adopting a balanced technique to stimulate efficiency enhancement and redeeming exhibition of excessive power in the transmitter. Consequently, this work goes beyond improving efficiency over a linear RF power amplifier design; in which a comprehensive investigation on the fundamental and harmonic components of class F RF power amplifier using a load-pull approach to realise an optimum load impedance and the matching network is presented. The frequency bandwidth for both amplifiers was allocated to operate in the 2.620-2.690 GHz of mobile LTE applications. The second part explores the development of the behavioural model for the class AB power amplifier. A particular novel, Hammerstein-Wiener based model is proposed to describe the dynamic nonlinear behaviour of the power amplifier. The RF power amplifier nonlinear distortion is approximated using a new linear parameter approximation approach. The first and second-order Hammerstein-Wiener using the Normalised Least Mean Square Error (NLMSE) algorithm is used with the aim of easing the complexity of filtering process during linear memory cancellation. Moreover, an enhanced adaptive Wiener model is proposed to explore the nonlinear memory effect in the system. The proposed approach is able to balance between convergence speed and high-level accuracy when compared with behavioural modelling algorithms that are more complex in computation. Finally, the adaptive predistorter technique is implemented and verified in the OFDM transceiver test-bed. The results were compared against the computed one from MATLAB simulation for OFDM and 5G modulation transmitters. The results have confirmed the reliability of the model and the effectiveness of the proposed predistorter.Fundacão para a Ciência e a Tecnologia, Portugal, under European Union’s Horizon 2020 research and innovation programme ... grant agreement H2020-MSCA-ITN- 2016 SECRET-722424 I also acknowledge the role of the National Space Research and Development Agency (NASRDA) Sokoto State Government Petroleum Technology Trust Fund (PTDF

Amplifier linearization by using the generalized baseband signal injection method.

Leung Chi-Shuen.Thesis (M.Phil.)--Chinese University of Hong Kong, 2002.Includes bibliographical references (leaves 82-89).Abstracts in English and Chinese.Chapter Chapter 1 --- Introduction --- p.1Chapter Chapter 2 --- Review of Linearization Techniques --- p.4Chapter 2.1 --- Feedforward --- p.5Chapter 2.2 --- Feedback --- p.7Chapter 2.3 --- Predistortion --- p.10Chapter Chapter 3 --- The Volterra Series Method for Nonlinear Analysis --- p.12Chapter 3.1 --- Volterra Series Method --- p.13Chapter 3.2 --- Nonlinear Transfer Function --- p.14Chapter 3.3 --- Weakly Nonlinear Approximation --- p.18Chapter 3.4 --- Nonlinear Modeling --- p.19Chapter 3.5 --- Determination of Nonlinear Transfer Function --- p.22Chapter Chapter 4 --- Manifestation of Nonlinear Behavior --- p.25Chapter 4.1 --- Two-Tone Volterra Series Analysis --- p.25Chapter 4.2 --- Harmonic Distortion --- p.28Chapter 4.3 --- AM/AM and AM/PM --- p.29Chapter 4.4 --- Intermodulation Distortion --- p.31Chapter Chapter 5 --- The Generalized Baseband Signal Injection Method --- p.33Chapter 5.1 --- Generalized Baseband Signal Injection Method (GM) --- p.34Chapter 5.2 --- Application of GM to Predistorter-Amplifier Linearization --- p.38Chapter 5.2.1 --- Case 1: Standalone Amplifier without Injection --- p.40Chapter 5.2.2 --- Case 2: Injection to Amplifier Only --- p.41Chapter 5.2.3 --- Case 3: Injection to Diode Predistorter Only --- p.41Chapter 5.2.4 --- Case 4: Injection to Both Diode Predistorter and Amplifier --- p.42Chapter 5.3 --- Application of GM to Multi-Stage Amplifier Linearization --- p.43Chapter 5.3.1 --- Case 1: Amplifying System with No Signal Injection --- p.46Chapter 5.3.2 --- Case 2: Amplifying System with Single Injection Point --- p.47Chapter 5.3.3 --- Case 3: Amplifying System with Two Injection Points --- p.48Chapter Chapter 6 --- Experimental Setup and Measurements --- p.50Chapter 6.1 --- Experimental Setup --- p.51Chapter 6.1.1 --- Diode Predistorter --- p.51Chapter 6.1.2 --- Small Signal Amplifier --- p.54Chapter 6.1.3 --- Medium Power Amplifier --- p.58Chapter 6.1.4 --- Baseband Signal Generation Circuit --- p.61Chapter 6.1.5 --- Baseband Amplifiers --- p.63Chapter 6.2 --- Linearization of Amplifier with Predistortion Circuitry --- p.65Chapter 6.2.1 --- Two-Tone Test --- p.65Chapter 6.2.2 --- Vector Signal Test --- p.68Chapter 6.2.3 --- Dynamic Range Evaluation --- p.70Chapter 6.3 --- Linearization of Multi-Stage Amplifying System --- p.71Chapter 6.3.1 --- Determination of Transfer and Gain Coefficients --- p.71Chapter 6.3.2 --- Two-Tone Test --- p.74Chapter 6.3.3 --- Vector Signal Test --- p.77Chapter 6.3.4 --- Dynamic Range Evaluation --- p.79Chapter Chapter 7 --- Conclusion and Future Work --- p.80References --- p.82Author's Publications --- p.9

mm-Wave Data Transmission and Measurement Techniques: A Holistic Approach

The ever-increasing demand on data services places unprecedented technical requirements on networks capacity. With wireless systems having significant roles in broadband delivery, innovative approaches to their development are imperative. By leveraging new spectral resources available at millimeter-wave (mm-wave) frequencies, future systems can utilize new signal structures and new system architectures in order to achieve long-term sustainable solutions.This thesis proposes the holistic development of efficient and cost-effective techniques and systems which make high-speed data transmission at mm-wave feasible. In this paradigm, system designs, signal processing, and measurement techniques work toward a single goal; to achieve satisfactory system level key performance indicators (KPIs). Two intimately-related objectives are simultaneously addressed: the realization of efficient mm-wave data transmission and the development of measurement techniques to enable and assist the design and evaluation of mm-wave circuits.The standard approach to increase spectral efficiency is to increase the modulation order at the cost of higher transmission power. To improve upon this, a signal structure called spectrally efficient frequency division multiplexing (SEFDM) is utilized. SEFDM adds an additional dimension of continuously tunable spectral efficiency enhancement. Two new variants of SEFDM are implemented and experimentally demonstrated, where both variants are shown to outperform standard signals.A low-cost low-complexity mm-wave transmitter architecture is proposed and experimentally demonstrated. A simple phase retarder predistorter and a frequency multiplier are utilized to successfully generate spectrally efficient mm-wave signals while simultaneously mitigating various issues found in conventional mm-wave systems.A measurement technique to characterize circuits and components under antenna array mutual coupling effects is proposed and demonstrated. With minimal setup requirement, the technique effectively and conveniently maps prescribed transmission scenarios to the measurement environment and offers evaluations of the components in terms of relevant KPIs in addition to conventional metrics.Finally, a technique to estimate transmission and reflection coefficients is proposed and demonstrated. In one variant, the technique enables the coefficients to be estimated using wideband modulated signals, suitable for implementation in measurements performed under real usage scenarios. In another variant, the technique enhances the precision of noisy S-parameter measurements, suitable for characterizations of wideband mm-wave components