Architecture and algorithms for the implementation of digital wireless receivers in FPGA and ASIC: ISDB-T and DVB-S2 cases

[EN] The first generation of Terrestrial Digital Television(DTV) has been in service for over a decade. In 2013, several countries have already completed the transition from Analog to Digital TV Broadcasting, most of which in Europe. In South America, after several studies and trials, Brazil adopted the Japanese standard with some innovations. Japan and Brazil started Digital Terrestrial Television Broadcasting (DTTB) services in December 2003 and December 2007 respectively, using Integrated Services Digital Broadcasting - Terrestrial (ISDB-T), also known as ARIB STD-B31. In June 2005 the Committee for the Information Technology Area (CATI) of Brazilian Ministry of Science and Technology and Innovation MCTI approved the incorporation of the IC-Brazil Program, in the National Program for Microelectronics (PNM) . The main goals of IC-Brazil are the formal qualification of IC designers, support to the creation of semiconductors companies focused on projects of ICs within Brazil, and the attraction of semiconductors companies focused on the design and development of ICs in Brazil. The work presented in this thesis originated from the unique momentum created by the combination of the birth of Digital Television in Brazil and the creation of the IC-Brazil Program by the Brazilian government. Without this combination it would not have been possible to make these kind of projects in Brazil. These projects have been a long and costly journey, albeit scientifically and technologically worthy, towards a Brazilian DTV state-of-the-art low complexity Integrated Circuit, with good economy scale perspectives, due to the fact that at the beginning of this project ISDB-T standard was not adopted by several countries like DVB-T. During the development of the ISDB-T receiver proposed in this thesis, it was realized that due to the continental dimensions of Brazil, the DTTB would not be enough to cover the entire country with open DTV signal, specially for the case of remote localizations far from the high urban density regions. Then, Eldorado Research Institute and Idea! Electronic Systems, foresaw that, in a near future, there would be an open distribution system for high definition DTV over satellite, in Brazil. Based on that, it was decided by Eldorado Research Institute, that would be necessary to create a new ASIC for broadcast satellite reception. At that time DVB-S2 standard was the strongest candidate for that, and this assumption still stands nowadays. Therefore, it was decided to apply to a new round of resources funding from the MCTI - that was granted - in order to start the new project. This thesis discusses in details the Architecture and Algorithms proposed for the implementation of a low complexity Intermediate Frequency(IF) ISDB-T Receiver on Application Specific Integrated Circuit (ASIC) CMOS. The Architecture proposed here is highly based on the COordinate Rotation Digital Computer (CORDIC) Algorithm, that is a simple and efficient algorithm suitable for VLSI implementations. The receiver copes with the impairments inherent to wireless channels transmission and the receiver crystals. The thesis also discusses the Methodology adopted and presents the implementation results. The receiver performance is presented and compared to those obtained by means of simulations. Furthermore, the thesis also presents the Architecture and Algorithms for a DVB-S2 receiver targeting its ASIC implementation. However, unlike the ISDB-T receiver, only preliminary ASIC implementation results are introduced. This was mainly done in order to have an early estimation of die area to prove that the project in ASIC is economically viable, as well as to verify possible bugs in early stage. As in the case of ISDB-T receiver, this receiver is highly based on CORDIC algorithm and it was prototyped in FPGA. The Methodology used for the second receiver is derived from that used for the ISDB-T receiver, with minor additions given the project characteristics.[ES] La primera generación de Televisión Digital Terrestre(DTV) ha estado en servicio por más de una década. En 2013, varios países completaron la transición de transmisión analógica a televisión digital, la mayoría de ellas en Europa. En América del Sur, después de varios estudios y ensayos, Brasil adoptó el estándar japonés con algunas innovaciones. Japón y Brasil comenzaron a prestar el servicio de Difusión de Televisión Digital Terrestre (DTTB) en diciembre de 2003 y diciembre de 2007 respectivamente, utilizando Radiodifusión Digital de Servicios Integrados Terrestres (ISDB-T), también conocida como ARIB STD-B31. En junio de 2005, el Comité del Área de Tecnología de la Información (CATI) del Ministerio de Ciencia, Tecnología e Innovación de Brasil - MCTI aprobó la incorporación del Programa CI-Brasil, en el Programa Nacional de Microelectrónica (PNM). Los principales objetivos de la CI-Brasil son la formación de diseñadores de CIs, apoyar la creación de empresas de semiconductores enfocadas en proyectos de circuitos integrados dentro de Brasil, y la atracción de empresas de semiconductores interesadas en el diseño y desarrollo de circuitos integrados. El trabajo presentado en esta tesis se originó en el impulso único creado por la combinación del nacimiento de la televisión digital en Brasil y la creación del Programa de CI-Brasil por el gobierno brasileño. Sin esta combinación no hubiera sido posible realizar este tipo de proyectos en Brasil. Estos proyectos han sido un trayecto largo y costoso, aunque meritorio desde el punto de vista científico y tecnológico, hacia un Circuito Integrado brasileño de punta y de baja complejidad para DTV, con buenas perspectivas de economía de escala debido al hecho que al inicio de este proyecto, el estándar ISDB-T no fue adoptado por varios países como DVB-T. Durante el desarrollo del receptor ISDB-T propuesto en esta tesis, se observó que debido a las dimensiones continentales de Brasil, la DTTB no sería suficiente para cubrir todo el país con la señal de televisión digital abierta, especialmente para el caso de localizaciones remotas, apartadas de las regiones de alta densidad urbana. En ese momento, el Instituto de Investigación Eldorado e Idea! Sistemas Electrónicos, previeron que en un futuro cercano habría un sistema de distribución abierto para DTV de alta definición por satélite en Brasil. Con base en eso, el Instituto de Investigación Eldorado decidió que sería necesario crear un nuevo ASIC para la recepción de radiodifusión por satélite, basada el estándar DVB-S2. En esta tesis se analiza en detalle la Arquitectura y algoritmos propuestos para la implementación de un receptor ISDB-T de baja complejidad y frecuencia intermedia (IF) en un Circuito Integrado de Aplicación Específica (ASIC) CMOS. La arquitectura aquí propuesta se basa fuertemente en el algoritmo Computadora Digital para Rotación de Coordenadas (CORDIC), el cual es un algoritmo simple, eficiente y adecuado para implementaciones VLSI. El receptor hace frente a las deficiencias inherentes a las transmisiones por canales inalámbricos y los cristales del receptor. La tesis también analiza la metodología adoptada y presenta los resultados de la implementación. Por otro lado, la tesis también presenta la arquitectura y los algoritmos para un receptor DVB-S2 dirigido a la implementación en ASIC. Sin embargo, a diferencia del receptor ISDB-T, se introducen sólo los resultados preliminares de implementación en ASIC. Esto se hizo principalmente con el fin de tener una estimación temprana del área del die para demostrar que el proyecto en ASIC es económicamente viable, así como para verificar posibles errores en etapa temprana. Como en el caso de receptor ISDB-T, este receptor se basa fuertemente en el algoritmo CORDIC y fue un prototipado en FPGA. La metodología utilizada para el segundo receptor se deriva de la utilizada para el re[CA] La primera generació de Televisió Digital Terrestre (TDT) ha estat en servici durant més d'una dècada. En 2013, diversos països ja van completar la transició de la radiodifusió de televisió analògica a la digital, i la majoria van ser a Europa. A Amèrica del Sud, després de diversos estudis i assajos, Brasil va adoptar l'estàndard japonés amb algunes innovacions. Japó i Brasil van començar els servicis de Radiodifusió de Televisió Terrestre Digital (DTTB) al desembre de 2003 i al desembre de 2007, respectivament, utilitzant la Radiodifusió Digital amb Servicis Integrats de (ISDB-T), coneguda com a ARIB STD-B31. Al juny de 2005, el Comité de l'Àrea de Tecnologia de la Informació (CATI) del Ministeri de Ciència i Tecnologia i Innovació del Brasil (MCTI) va aprovar la incorporació del programa CI Brasil al Programa Nacional de Microelectrònica (PNM). Els principals objectius de CI Brasil són la qualificació formal dels dissenyadors de circuits integrats, el suport a la creació d'empreses de semiconductors centrades en projectes de circuits integrats dins del Brasil i l'atracció d'empreses de semiconductors centrades en el disseny i desenvolupament de circuits integrats. El treball presentat en esta tesi es va originar en l'impuls únic creat per la combinació del naixement de la televisió digital al Brasil i la creació del programa Brasil CI pel govern brasiler. Sense esta combinació no hauria estat possible realitzar este tipus de projectes a Brasil. Estos projectes han suposat un viatge llarg i costós, tot i que digne científicament i tecnològica, cap a un circuit integrat punter de baixa complexitat per a la TDT brasilera, amb bones perspectives d'economia d'escala perquè a l'inici d'este projecte l'estàndard ISDB-T no va ser adoptat per diversos països, com el DVB-T. Durant el desenvolupament del receptor de ISDB-T proposat en esta tesi, va resultar que, a causa de les dimensions continentals de Brasil, la DTTB no seria suficient per cobrir tot el país amb el senyal de TDT oberta, especialment pel que fa a les localitzacions remotes allunyades de les regions d'alta densitat urbana.. En este moment, l'Institut de Recerca Eldorado i Idea! Sistemes Electrònics van preveure que, en un futur pròxim, no hi hauria a Brasil un sistema de distribució oberta de TDT d'alta definició a través de satèl¿lit. D'acord amb això, l'Institut de Recerca Eldorado va decidir que seria necessari crear un nou ASIC per a la recepció de radiodifusió per satèl¿lit. basat en l'estàndard DVB-S2. En esta tesi s'analitza en detall l'arquitectura i els algorismes proposats per l'execució d'un receptor ISDB-T de Freqüència Intermèdia (FI) de baixa complexitat sobre CMOS de Circuit Integrat d'Aplicacions Específiques (ASIC). L'arquitectura ací proposada es basa molt en l'algorisme de l'Ordinador Digital de Rotació de Coordenades (CORDIC), que és un algorisme simple i eficient adequat per implementacions VLSI. El receptor fa front a les deficiències inherents a la transmissió de canals sense fil i els cristalls del receptor. Esta tesi també analitza la metodologia adoptada i presenta els resultats de l'execució. Es presenta el rendiment del receptor i es compara amb els obtinguts per mitjà de simulacions. D'altra banda, esta tesi també presenta l'arquitectura i els algorismes d'un receptor de DVB-S2 de cara a la seua implementació en ASIC. No obstant això, a diferència del receptor ISDB-T, només s'introdueixen resultats preliminars d'implementació en ASIC. Això es va fer principalment amb la finalitat de tenir una estimació primerenca de la zona de dau per demostrar que el projecte en ASIC és econòmicament viable, així com per verificar possibles errors en l'etapa primerenca. Com en el cas del receptor ISDB-T, este receptor es basa molt en l'algorisme CORDIC i va ser un prototip de FPGA. La metodologia utilitzada per al segon receptor es deriva de la utilitzada per al receptor IRodrigues De Lima, E. (2016). Architecture and algorithms for the implementation of digital wireless receivers in FPGA and ASIC: ISDB-T and DVB-S2 cases [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/61967TESI

Study of repeater technology for advanced multifunctional communications satellites

Investigations are presented concerning design concepts and implementation approaches for the satellite communication repeater subsystems of advanced multifunctional satellites. In such systems the important concepts are the use of multiple antenna beams, repeater switching (routing), and efficient spectrum utilization through frequency reuse. An information base on these techniques was developed and tradeoff analyses were made of repeater design concepts, with the work design taken in a broad sense to include modulation beam coverage patterns. There were five major areas of study: requirements analysis and processing; study of interbeam interference in multibeam systems; characterization of multiple-beam switching repeaters; estimation of repeater weight and power for a number of alternatives; and tradeoff analyses based on these weight and power data

Design and development study for a space base multiple signal modem /SMDS/, volume 2 Final report

Technical descriptions and specifications of modules and subunits for space base multiple signal mode

Orthogonal Pseudo-Random Sequence Enabled Cognitive and Emergency Communications

With the ever-increasing demands for the broadband mobile communications, it is becoming more and more difficult to accommodate all existing and emerging wireless services and applications due to the limited communication resources particularly radio spectrum. In addition, system parameters of wireless communications often need to be adapted due to the variation of channel characteristics and user demands. Cognitive communication is emerged as an effective technique, particularly to improve the utilization rate of limited communication resources adaptively according to the change in its operating conditions and requirements. To handle these challenges efficiently and reliably in cognitive radio scenario, cyclic prefix (CP) of the OFDM system is precoded in this thesis using pseudo-random sequence. This signaling link can effectively carry transmission parameters and system adaptation information. In first part of the thesis, mutual interference minimization and transmission power adaptation enabled by the additional signaling link are also investigated. In order to make use of this precoded cyclic prefix (PCP) signaling link, an efficient demodulation scheme is needed to reduce the implementation complexity. Therefore, a low complexity signaling demodulator along with a multipath combining technique to further improve the performance in real communication scenario like in multipath channel is proposed in the thesis. The final aspect of this thesis is the investigation of a robust communication system using digital television (DTV) transmitter identification watermark signal which is also a modulated pseudo-random sequence. The previous study on PCP signaling is thus extended to an emergency communication system using DTV watermark. It is found that watermark based communication system is more robust than the DTV broadcasting and can reach a much wider coverage with significantly increased network reliability, which is suitable for national emergency situations

Sharing the 620-790 MHz band allocated to terrestrial television with an audio-bandwidth social service satellite system

A study was carried out to identify the optimum uplink and downlink frequencies for audio-bandwidth channels for use by a satellite system distributing social services. The study considered functional-user-need models for five types of social services and identified a general baseline system that is appropriate for most of them. Technical aspects and costs of this system and of the frequency bands that it might use were reviewed, leading to the identification of the 620-790 MHz band as a perferred candidate for both uplink and downlink transmissions for nonmobile applications. The study also led to some ideas as to how to configure the satellite system

Optimization in the design of a 12 gigahertz low cost ground receiving system for broadcast satellites. Volume 2: Antenna system and interference

The antenna characteristics are analyzed of a low cost mass-producible ground station to be used in broadcast satellite systems. It is found that a prime focus antenna is sufficient for a low-cost but not a low noise system. For the antenna feed waveguide systems are the best choice for the 12 GHz band, while printed-element systems are recommended for the 2.6 GHz band. Zoned reflectors are analyzed and appear to be attractive from the standpoint of cost. However, these reflectors suffer a gain reduction of about one db and a possible increase in sidelobe levels. The off-axis gain of a non-auto-tracking station can be optimized by establishing a special illumination function at the reflector aperture. A step-feed tracking system is proposed to provide automatic procedures for searching for peak signal from a geostationary satellite. This system uses integrated circuitry and therefore results in cost saving under mass production. It is estimated that a complete step-track system would cost only $512 for a production quantity of 1000 units per year

Kokeellinen taajuusmuunnin DVB-T -lähettimeen

Kiinnostus digitaalisen televisiolähetteen vastaanottamiseen matkaviestimillä on lisääntynyt viime vuosina. Euroopalaista DVB-T -digitaalitelevisiostandardia viimeistellessä perustettiin ad-hoc ryhmä DVB-X tutkimaan, miten standardia voitaisiin muuttaa, jotta liikkuva vastaanotto olisi mahdollista. Samaan aikaan langattomien lähiverkkojen käyttö on lisääntynyt huomattavasti, joten viestintäviranomaiset ovat varanneet uusia taajuuskaistoja mikroaaltotaajuuksilta näiden käyttöön. Koska uuden sukupolven langattomien lähiverkkojen standardi HiperLAN/2 ja digitaalitelevisiostandardi DVB-T käyttävät samankaltaista OFDM-lähetystekniikkaa, yhdistämällä lähiverkkojen kaupalliset RF osat ja DVB-T lähete on mahdollista toteuttaa mikroaaltotaajuuksilla toimiva digitaalitelevisiolähetin. Diplomityössä esitetään ratkaisu, jossa UHF-taajuuksinen digitaalitelevisiolähete nostetaan taajuusmuuntimella 5,8 GHz ISM-kaistalle. Jotta muuntimen kriittisten osien sekä taajuusmuunnoksen ongelmat voitaisiin ratkoa, työssä esitetään lyhyt kertaus DVB-T -tekniikan tärkeimpiin alueisiin. Läpikäymällä viimeaikaisia radioaaltojen etenemismallien mittauskampanjoita alan kirjallisuudesta sekä vastaanottoalueen kartoistus, todetaan linkkibudjettilaskelmalla, että tarvittava lähetysteho on noin 10 W EIRP. Koska vastaanottoalue on kapea, lähetinantenni vahvistaa signaalia 20 dB. Tällöin DVB-T -lähettimen vaatimuksiin kuuluva lineaarinen vahvistin toteutetaan käyttämällä ylimitoitettua 1 W tehovahvistinta 10 dB alle sen maksimitehon. Työssä käsitellään myös muita tapoja linearisoida tehovahvistin, jotta backoff:n käyttö voidaan perustella. Jotta rakennetun taajuusmuuntimen suorituskykyä voitaisiin arvioida, diplomityön loppupuolella esitellään eri mittausmenetelmiä sekä VTT:n Otadigi-lähettimen signaalin voimakkuuden mittauksen tulokset. Mittaustuloksien avulla voidaan myös arvioida, millainen taajuusmuunnin on järkevä toteuttaa

Communication satellite systems for Alaska

Technical and cost factors for implementation of Alaskan communication satellite syste

A Cognitive TV White Space Access Framework

Given the current boom in applications and services for mobile devices, data traffic is rapidly expanding, with the consequence that increasing spectrum capacity is being mandated. Following the switchover from analogue to digital platforms, Television White Space (TVWS) affords a fertile opportunity to supplement existing licensed spectrum to ease this scarcity. There are however, a number of obstacles to wide-scale TVWS adoption, including the accurate detection of primary users (PU), the hidden node problem and bandwidth availability for unlicensed secondary users (SU). Regulatory and industry bodies have sought to address some of these issues using a static database for spectrum access decisions, though this involves manual maintenance and accuracy can be compromised due to a lack of real-time information. While the new IEEE802.11af wireless local area network (WLAN) standard attempts to resolve some SU access issues, there remain many challenges, such as the critical asymmetry between mobile and base station power resources. This thesis presents a new cognitive TVWS access framework encompassing a real-time sensing paradigm for TVWS deployment that uses a spectrum-efficient scheme to uphold quality-of-service (QoS) for both PU and SU. A novel dynamic spectrum allocation (DSA) model has been formulated allied with a resilient interference management system which exploits the unique way digital terrestrial TV channels are allocated in different geographical areas. A margin strategy has been framed to support efficient TVWS channel reuse, with an exclusion zone established to overcome the hidden node problem, while an innovative routing algorithm using cross-layer information, both extends coverage capacity and maximises QoS provision by ensuring a more balanced resource allocation. Critical evaluation of the new access framework confirms that significant QoS improvements for SU are achieved compared to existing TVWS techniques. It importantly embodies a generic, practical, resource-efficient solution for TVWS deployment, which is compliant with current PU regulatory requirements

Distribuição de sinais OFDM e vídeo sobre fibra

Mestrado em Engenharia Electrónica e TelecomunicaçõesEste trabalho incide na transmissão de sinais de rádio e vídeo sobre fibra óptica, usando modulação analógica de amplitude, ou seja sistemas do tipo Radio over Fiber (RoF). Começamos por descrever alguns dos sinais de rádio e vídeo que podem beneficiar, em certas aplicações, do recurso a sistemas RoF. Prosseguimos com a transmissão de sinais OFDM, na banda das micro-ondas e ondas-milimétricas, de forma a concluir acerca das vantagens e desvantagens dos vários tipos de modulação óptica que podemos utilizar no transmissor. Também focamos a multiplicação de frequência óptica no sentido de identificar soluções para distribuição de sinais RF de alta frequência, a baixo custo. De seguida, dando sequência ao estudo da transmissão dos sinais OFDM, analisamos alguns dos cenários de transmissão de sinais WPAN de acordo com os standards ECMA-368 e ECMA-387. Finalmente, acabamos por estudar brevemente a distribuição de sinais de vídeo digital sobre fibra usando modulação externa.This work focuses on the transmission of radio and video signals over fiber using analog amplitude modulation, i.e. Radio over Fiber (RoF) systems. We begin by describing some of the radio and video signals that can benefit, in certain applications, of the use of RoF systems. Then, we will proceed to the transmission of OFDM signals, in the microwave and millimeter-wave frequency band, in order to assess the advantages and disadvantages of several types of optical modulation that we can use at the transmitter. We also study optical frequency multiplication in order to identify solutions to the low-cost distribution of high frequency signals. Then, following the transmission of OFDM signals, we analyzed some of the possible scenarios for distribution of WPAN signals according to the standards ECMA-368 and ECMA-387. Finally we briefly examine the distribution of digital video signals over fiber using external modulation