Aeronautical Situational Awareness - Airport Surface

This paper advocates for a specific design approach, based on simple principals, yet addresses challenges faced by the system engineers when designing complex data and information infrastructure. The document provides guidance for breaking out various work elements in the overall network architecture design, so that communication systems are conceived and effectively realized regardless of their location, size and local specifics. Although targeted at the Global Airspace System (GAS) and National Airspace System (NAS), this framework can be applied to any network-centric architecture

Communication systems operating in the 60 GHz ISM band: Overview

This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.This paper gives an overview of frequency regulation, standardization, and applications of 60 GHz communication systems. Based on forecasted developments of mobile IP traffic, the motivation for investigating circuits, and systems for the 60 GHz band is underlined. Some physical properties of 60 GHz radio waves are outlined and implications on potential applications are sketched. The current international and European frequency regulation aspects are presented. The main parameters of three different international standards are summarized and compared with each other. Details of channel spacing and channel bonding are given. Based on the investigation of different applications, the main system requirements are derived. Finally, some information on protocol issues and system integration aspects are given.Peer Reviewe

2 dimension woven kenaf reinforced unsaturated polyester composite

In recent years, natural fiber from vegetables such as hemp, sisal, ramie, jute and kenaf has been recognized and studied by many researchers due to its potential as an alternative material for synthetic fibers in composite application. Kenaf fiber is a potential reinforced material for composite due to its acceptable properties and supported by the development in Malaysian Kenaf cultivation. Previous studies have demonstrated that Kenaf fibers were recognized in several applications such as automotive component, panel board, packaging, filter material and industrial paper. However, the reinforcement of the fibers is in random, unidirectional and particle form. Therefore, this research is focusing on the composites woven structural preform from the kenaf fiber assisted with the use of internal geometry modeling for optimization. The effect of primary parameters, which are the yarns properties, the fabric count and the weave designs were evaluated on it physical and mechanical properties. Different woven design preform (plain, twill 4/4, satin 8/3 and basket 4/4) were fabricated using floor loom and infused with unsaturated polyester resin using vacuum infusion process. The mechanical properties of the composites were measured and showed that satin 8/3 has highest tensile strength of 39MPa and Plain has highest tensile modulus of 2.63GPa, with flexural strength and impact strength of 48MPa and 29kJ/m2 respectively. The use of VIP and UPE show a good infusion of resin between intra yarns but need much lower viscosity on the UPE for inter yarns. The used of 5% sodium hydroxide solution with the application of tension during the treatment enhanced the composite strength of 12%. The stacking sequence and orientation of 0⁰ ,45⁰,0⁰ of the laminate composite had increased the flexural strength and impact strength of 73MPa and of 82MPa respectively. It is recommended to use a plain and satin structure for better infusion in vacuum infusion proces

6G Wireless Systems: Vision, Requirements, Challenges, Insights, and Opportunities

Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called "G's" is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality, there is already significant interest in systems beyond 5G, which we refer to as the sixth-generation (6G) of wireless systems. In contrast to the already published papers on the topic, we take a top-down approach to 6G. We present a holistic discussion of 6G systems beginning with lifestyle and societal changes driving the need for next generation networks. This is followed by a discussion into the technical requirements needed to enable 6G applications, based on which we dissect key challenges, as well as possibilities for practically realizable system solutions across all layers of the Open Systems Interconnection stack. Since many of the 6G applications will need access to an order-of-magnitude more spectrum, utilization of frequencies between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G eco-system will feature a diverse range of frequency bands, ranging from below 6 GHz up to 1 THz. We comprehensively characterize the limitations that must be overcome to realize working systems in these bands; and provide a unique perspective on the physical, as well as higher layer challenges relating to the design of next generation core networks, new modulation and coding methods, novel multiple access techniques, antenna arrays, wave propagation, radio-frequency transceiver design, as well as real-time signal processing. We rigorously discuss the fundamental changes required in the core networks of the future that serves as a major source of latency for time-sensitive applications. While evaluating the strengths and weaknesses of key 6G technologies, we differentiate what may be achievable over the next decade, relative to what is possible.Comment: Accepted for Publication into the Proceedings of the IEEE; 32 pages, 10 figures, 5 table

Adaptive optical feedforward linearization of optical transceiver for radio over fiber communication link

With the tremendous growth in numbers of mobile data subscribers and explosive demand for mobile data, the current wireless access network need to be augmented in order to keep up with the data speed promised by the future generation mobile network standards. Radio over fiber technology (RoF) is a cost effective solution because of its ability to support numerous numbers of simple structured base stations by consolidating the signal processing functions at the central station. RoF systems are analog systems where noise figure and spurious free dynamic range (SFDR) are important parameters in an RoF link. The nonlinearity of a laser transmitter is a major limiting factor to the performance of an RoF link, as it generates spurious spectral components, leading to intermodulation distortions (IMD), which limit the achievable SFDR of the analog RF wave transmissions. The device nonlinearity can be mitigated through various linearization schemes. The feedforward linearization technique offers a number of advantages compared to other techniques, as it offers good suppression of distortion products over a large bandwidth and supports high operating frequencies. On the other hand, feedforward linearization is a relatively sensitive scheme, where its performance is highly influenced by changing operating conditions such as laser aging, temperature effect, and input signal variations. Therefore, for practical implementations the feedforward system has to be real-time adaptive. This thesis aims to develop an adaptive optical feedforward linearization system for radio over fiber links. Mathematical analyses and computer simulations are performed to determine the most efficient algorithm for the adaptive controller for laser transmitter feedforward linearization system. Experimental setup and practical measurement are performed for an adaptive feedforward linearized laser transmitter and its performance is optimized. The adaptive optical feedforward linearization system has been modeled and simulated in MATLAB Simulink. The performances of two adaptive algorithms, which are related to the gradient signal method, such as least mean square (LMS) and recursive least square (RLS) have been compared. The LMS algorithm has been selected because of its robustness and simplicity. Finally, the adaptive optical feedforward linearization system has been set up with digital signal processor (DSP) as the control device, and practical measurement has been performed. The system has achieved a suppression of 14 dB in the third order IMD products over a bandwidth of 30 MHz, in a two-tone measurement at 1.7 GHz

Wireless Network Communications Overview for Space Mission Operations

The mission of the On-Board Wireless Working Group (WWG) is to serve as a general CCSDS focus group for intra-vehicle wireless technologies. The WWG investigates and makes recommendations pursuant to standardization of applicable wireless network protocols, ensuring the interoperability of independently developed wireless communication assets. This document presents technical background information concerning uses and applicability of wireless networking technologies for space missions. Agency-relevant driving scenarios, for which wireless network communications will provide a significant return-on-investment benefiting the participating international agencies, are used to focus the scope of the enclosed technical information

Application priority framework for fixed mobile converged communication networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The current prospects in wired and wireless access networks, it is becoming increasingly important to address potential convergence in order to offer integrated broadband services. These systems will need to offer higher data transmission capacities and long battery life, which is the catalyst for an everincreasing variety of air interface technologies targeting local area to wide area connectivity. Current integrated industrial networks do not offer application aware context delivery and enhanced services for optimised networks. Application aware services provide value-added functionality to business applications by capturing, integrating, and consolidating intelligence about users and their endpoint devices from various points in the network. This thesis mainly intends to resolve the issues related to ubiquitous application aware service, fair allocation of radio access, reduced energy consumption and improved capacity. A technique that measures and evaluates the data rate demand to reduce application response time and queuing delay for multi radio interfaces is proposed. The technique overcomes the challenges of network integration, requiring no user intervention, saving battery life and selecting the radio access connection for the application requested by the end user. This study is split in two parts. The first contribution identifies some constraints of the services towards the application layer in terms of e.g. data rate and signal strength. The objectives are achieved by application controlled handover (ACH) mechanism in order to maintain acceptable data rate for real-time application services. It also looks into the impact of the radio link on the application and identifies elements and parameters like wireless link quality and handover that will influence the application type. It also identifies some enhanced traditional mechanisms such as distance controlled multihop and mesh topology required in order to support energy efficient multimedia applications. The second contribution unfolds an intelligent application priority assignment mechanism (IAPAM) for medical applications using wireless sensor networks. IAPAM proposes and evaluates a technique based on prioritising multiple virtual queues for the critical nature of medical data to improve instant transmission. Various mobility patterns (directed, controlled and random waypoint) has been investigated and compared by simulating IAPAM enabled mobile BWSN. The following topics have been studied, modelled, simulated and discussed in this thesis: 1. Application Controlled Handover (ACH) for multi radios over fibre 2. Power Controlled Scheme for mesh multi radios over fibre using ACH 3. IAPAM for Biomedical Wireless Sensor Networks (BWSN) and impact of mobility over IAPAM enabled BWSN. Extensive simulation studies are performed to analyze and to evaluate the proposed techniques. Simulation results demonstrate significant improvements in multi radios over fibre performance in terms of application response delay and power consumption by upto 75% and 15 % respectively, reduction in traffic loss by upto 53% and reduction in delay for real time application by more than 25% in some cases