A battery hardware-in-the-loop setup for concurrent design and evaluation of real-time optimal HEV power management controllers

Razavian, R. S., Azad, N. L., & McPhee, J. (2013). A battery hardware-in-the-loop setup for concurrent design and evaluation of real-time optimal HEV power management controllers. International Journal of Electric and Hybrid Vehicles, 5(3), 177. Final version published by Inderscience Publishers, and available at: https://doi.org/10.1504/IJEHV.2013.057604We have developed a battery hardware-in-the-loop (HIL) setup, which can expedite the design and evaluation of power management controllers for hybrid electric vehicles (HEVs) in a novel cost- and time-effective manner. The battery dynamics have a significant effect on the HEV power management controller design; therefore, physical batteries are included in the simulation loop for greater simulation fidelity. We use Buckingham's Pi Theorem in the scaled-down battery HIL setup to reduce development and testing efforts, while maintaining the flexibility and fidelity of the control loop. In this paper, usefulness of the setup in parameter identification of a simple control-oriented battery model is shown. The model is then used in the power management controller design, and the real-time performance of the designed controller is tested with the same setup in a realistic control environment. Test results show that the designed controller can accurately capture the dynamics of the real system, from which the assumptions made in its design process can be confidently justified.Financial support for this research has been provided by the Natural Sciences and Engineering Research Council of Canada (NSERC), Toyota, and Maplesoft

Coupling excavator hydraulic system and internal combustion engine models for the real-time simulation

Rising energy costs and emissions restrictions force manufacturers to exploit new techniques to reduce fuel consumption and pollutant production. Many solutions have been proposed for off-road vehicles, mainly based on reduction of hydraulic losses, better control strategies and introduction of hybrid architectures. In these applications the optimization of the matching between hydraulic system and thermal engine is a major concern to improve system overall efficiency. The work presented in the paper is focused on the development of a method for the simulation of typical mobile machinery where hydraulic systems are powered by internal combustion engines; the proposed co-simulation approach can be useful in the development cycle of this machinery

Aeronautical Engineering: A special bibliography with indexes, supplement 54

This bibliography lists 316 reports, articles, and other documents introduced into the NASA scientific and technical information system in January 1975

An investigation into hybrid power trains for vehicles with regenerative braking

Imperial Users onl

Development of Integrated Models for Thermal Management in Hybrid Vehicles

[ES] En los últimos años, la industria de la automoción ha hecho un gran esfuerzo para producir sistemas de propulsión más eficientes y menos contaminantes sin menguar su rendimiento. Las nuevas regulaciones impuestas por las autoridades han empujado a la industria hacia la electrificación de los sistemas de propulsión mientras que las tecnologías desarrolladas para el sistema de propulsión convencional, basado en motores de combustión interna alternativos (MCIA), ya no son suficientes. El modelado numérico ha demostrado ser una herramienta indispensable para el diseño, desarrollo y optimización de sistemas de gestión térmica en trenes motrices electrificados, ahorrando costes y reduciendo el tiempo de desarrollo. La gestión térmica en los MCIA siempre ha sido importante para mejorar el consumo, las emisiones y la seguridad. Sin embargo, es todavía más importante en los sistemas de propulsión híbridos, a causa de la complejidad del sistema y al funcionamiento intermitente del MCIA. Además, los trenes motrices electrificados tienen varias fuentes de calor (es decir, MCIA, batería, máquina eléctrica) con diferentes requisitos de funcionamiento térmico. El objetivo principal de este trabajo ha sido desarrollar modelos térmicos para estudiar la mejora de los sistemas de gestión térmica en sistemas de propulsión electrificados (es decir, vehículo híbrido), estudiando y cuantificando la influencia de diferentes estrategias en el rendimiento, la seguridad y la eficiencia de los vehículos. La metodología desarrollada en este trabajo consistió tanto en la realización de experimentos como en el desarrollo de modelos numéricos. De hecho, se llevó a cabo una extensa campaña experimental para validar los diferentes modelos del tren motriz electrificado. Los datos obtenidos de las campañas experimentales sirvieron para calibrar y validar los modelos así como para corroborar los resultados obtenidos por los estudios numéricos. En primer lugar, se estudiaron las diferentes estrategias de gestión térmica de manera independiente para cada componente del tren motriz. Para el MCIA se estudió el uso de nanofluidos, el aislamiento del colector y puertos de escape, así como el cambio de volumen de sus circuitos hidráulicos. De igual forma, se evaluó el impacto de diferentes estrategias para la mejora térmica de las baterías. Además, el modelo de máquina eléctrica se utilizó para desarrollar pruebas experimentales que emulaban el daño térmico producido en ciclos reales de conducción. En segundo lugar, los modelos de tren motriz se integraron utilizando un estándar de co-simulación para evaluar el impacto de un sistema de gestión térmica integrado. Finalmente, se implementó un nuevo control del sistema de gestión de energía para evaluar el impacto de considerar el estado térmico del MCIA al momento de decidir la distribución de potencia del vehículo híbrido. Los resultados han demostrado que el uso de nanofluidos tiene un impacto muy limitado tanto en el MCIA como en el comportamiento térmico de la batería. Además, también mostraron que al reducir el volumen de refrigerante en un 45 %, la reducción en el tiempo de calentamiento del MCIA y el consumo de combustible en comparación con el caso baso fue del 7 % y del 0.4 %, respectivamente. Además, para condiciones de frio (7ºC), el impacto fue todavía mayor, obteniendo una reducción del tiempo de calentamiento y del consumo de combustible del 13 % y del 0.5 % respectivamente. Por otro lado, los resultados concluyeron que durante el calentamiento del MCIA, el sistema integrado de gestión térmica mejoró el consumo de energía en un 1.74 % y un 3 % para condiciones de calor (20ºC) y frío (-20ºC), respectivamente. Esto se debe al hecho que el sistema de gestión térmica integrado permite evitar la caída de temperatura del MCIA cuando el sistema de propulsión está en manera eléctrica pura.[CA] En els últims anys, la indústria de l'automoció ha fet un gran esforç per a produir sistemes de propulsió més eficients i menys contaminants sense minvar el seu rendiment. Les noves regulacions imposades per les autoritats han espentat a la indústria cap a l'electrificació dels sistemes de propulsió mentre que les tecnologies desenvolupades per al sistema de propulsió convencional, basat en motors de combustió interna alternatius (MCIA), ja no són suficients. El modelatge numèric ha demostrat ser una eina indispensable per al disseny, desenvolupament i optimització de sistemes de gestió tèrmica en trens motrius electrificats, estalviant costos i reduint el temps de desenvolupament. La gestió tèrmica en els MCIA sempre ha sigut important per a millorar el consum, les emissions i la seguretat. No obstant això, és encara més important en els sistemes de propulsió híbrids, a causa de la complexitat del sistema i al funcionament intermitent del MCIA. A més, els trens motrius electrificats tenen diverses fonts de calor (és a dir, MCIA, bateria, màquina elèctrica) amb diferents requisits de funcionament tèrmic. L'objectiu principal d'aquest treball va ser desenvolupar models tèrmics per a estudiar la millora dels sistemes de gestió tèrmica en sistemes de propulsió electrificats (és a dir, vehicle híbrid), estudiant i quantificant la influència de diferents estratègies en el rendiment, la seguretat i l'eficiència dels vehicles. La metodologia desenvolupada en aquest treball va consistir tant en la realització d'experiments com en el desenvolupament de models numèrics. De fet, es va dur a terme una extensa campanya experimental per a validar els diferents models del tren motriu electrificat. Les dades obtingudes de les campanyes experimentals van servir per a calibrar i validar els models així com per a corroborar els resultats obtinguts pels estudis numèrics. En primer lloc, es van estudiar les diferents estratègies de gestió tèrmica de manera independent per a cada component del tren motriu. Per al MCIA es va estudiar l'us de nanofluids, l'aïllament del col·lector i ports d'eixida així com el canvi de volum dels seus circuits hidràulics. D'igual forma, es va avaluar l'impacte de diferents estratègies per a la millora tèrmica de les bateries. A més, el model de màquina elèctrica es va utilitzar per a desenvolupar proves experimentals que emulaven el mal tèrmic produït en cicles reals de conducció. En segon lloc, els models de tren motriu es van integrar utilitzant un estàndard de co-simulació per a avaluar l'impacte d'un sistema de gestió tèrmica integrat. Finalment, es va implementar un nou control del sistema de gestió d'energia per a avaluar l'impacte de considerar l'estat tèrmic del MCIA al moment de decidir la distribució de potència del vehicle híbrid. Els resultats han demostrat que l'us de nanofluids té un impacte molt limitat tant en el MCIA com en el comportament tèrmic de la bateria. A més, també van mostrar que en reduir el volum de refrigerant en un 45 %, la reducció en el temps de calfament del MCIA i el consum de combustible en comparació amb el cas base va ser del 7 % i del 0.4 %, respectivament. A més, per a condicions de fred (-7ºC), l'impacte va ser encara major, obtenint una reducció del temps de calfament i del consum de combustible del 13 % i del 0.5 % respectivament. D'altra banda, els resultats van concloure que durant el calfament del MCIA, el sistema integrat de gestió tèrmica va millorar el consum d'energia en un 1.74 % i un 3 % per a condicions de calor (20ºC) i fred (-20ºC), respectivament. Això es deu al fet que el sistema de gestió tèrmica integrat permet evitar la caiguda de temperatura del MCIA quan el sistema de propulsió està en manera elèctrica pura.[EN] In recent years, the automotive industry has made a great effort to produce more efficient and less polluting propulsion systems without diminishing their performance. The new regulations imposed by the authorities have pushed the industry towards the electrification of powertrains while, technologies developed for the conventional propulsion system based on alternative internal combustion engines (ICEs), are no longer sufficient. Numerical modeling has proven to be an indispensable tool for the design, development and optimization of thermal management systems in electrified powertrains, saving costs and reducing development time. Thermal management in ICEs has always been important for improving consumption, emissions and safety. However, it is even more important in hybrid powertrains, due to the complexity of the system and the intermittent operation of the ICE. In addition, electrified powertrains have various heat sources (i.e., ICE, battery, Electric machine) with different thermal operating requirements. The main objective of this work was to develop thermal models to study the improvement of thermal management systems in electrified powertrains (i.e., hybrid electric vehicle), shedding light and quantifying the influence of different strategies on performance, safety and efficiency of the vehicles. The methodology developed in this paper consisted both in carrying out experiments and in developing numerical models. In fact, an extensive experimental campaign was carried out to validate the various models of the electrified powertrain. The data obtained from the experimental campaigns served to calibrate and validate the models as well as to corroborate the results obtained by the numerical studies. Firstly, the different thermal management strategies were studied independently for each component of the powertrain. For the ICE, the use of nanofluids, insulation of exhaust manifold and ports as well as the volume change of its hydraulic circuits were studied. Similarly, the impact of different strategies for the thermal improvement of batteries was evaluated. Furthermore, the electric machine model was used for developing experimental tests which emulated the thermal damage produced in real driving cycles. Secondly, the powertrain models were integrated using a co-simulation standard to assess the impact of an integrated thermal management system. Finally, a new control energy management system was implemented to assess the impact of considering the ICE thermal state when deciding the power split of the hybrid vehicle. The results have shown that the use of nanofluids has a very limited impact on both the ICE and the battery's thermal behaviour. In addition, they also showed that by reducing the volume of coolant by 45 %, the reduction in ICE warm up time and fuel consumption compared to the base case were 7 % and 0.4 %, respectively. In addition, for cold conditions (-7ºC), the impact was even greater, obtaining a reduction in warm up time and fuel consumption of 13 % and 0.5 % respectively. On the other hand, the results concluded that during the warming of ICE, the integrated thermal management system improved energy consumption by 1.74 % and 3 % for warm (20ºC) and cold (-20ºC) conditions, respectively. This is because the integrated TMS makes it possible to prevent the ICE temperature drop when the powertrain is in pure electric mode. Finally, significant gains during Worldwide harmonized Light vehicles Test Cycles (WLTC) and Real Driving Emissions (RDE) cycles were observed when the ICE thermal state was chosen when deciding the power distribution.The author would like to sincerely acknowledge the founding support pro- vided by Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital in the framework of the Ayuda Predoctoral GVA. (ACIF/2020/234). Additionally the author would also acknowledge the support provided by Renault S.A.S.Dreif Bennany, A. (2023). Development of Integrated Models for Thermal Management in Hybrid Vehicles [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/19406

Combined Traction and Energy Recovery Motor for Electric Vehicles

Electric vehicle manufacturers are looking for ways to optimize energy use for vehicle range extension and reduction of battery capacity. Electric motors have lower efficiencies at very low speed and high torque. This is typically at vehicle launch from standstill, at very low speeds, and during energy regeneration at lower speeds and approaching standstill. The KersTech solution is a breakthrough technology allowing supplement of the electric drive with a hydraulic drive, active in lower speeds ranges, dropping out as the electric motor takes over in its higher efficiency range of operation. The report consists of four parts. Part I presents novel the hybrid vehicle simulations in MATLAB. Both the Diesel-Hydraulic Hybrid Vehicle and Electric-Hydraulic Hybrid Vehicle have been simulated and compared in this report. Part II deals with the electrical system control design. Permanent magnet synchronous motors have been widely used in hybrid electric vehicle applications. Permanent magnet synchronous motors have a small size, high efficiency and high performance. This report presents a mathematical model of permanent magnet synchronous motor. Power switching electronics are used to generate the desired voltage/current from DC source. A pulse width modulation technique controls the switching power electronic by creating a control signals which are applied to their gates. The whole circuit of the inverter based on space vector pulse width modulation is simulated in MATLAB/Simulink and its results are presented. Field-oriented control is implemented via digital signal processors to control the permanent magnet synchronous motor. Clarke and Park transformations are applied to “abc coordinate frame of the permanent magnet synchronous motor model to get the “qd coordinate frame used in the field oriented control technique. Hence, the developed torque and the magnetizing the flux component are controlled separately. PI controller is used to control the motor speed and torque. PI controllers are designed using frequency response method and a symmetric optimum method. The whole system is simulated based on the mathematical model of PMSM and field oriented control method with designed PI controllers. Simulation results show the PMSM to have perfect dynamic response. A digital signal processor can be used to implement the field oriented control algorithms and compute the parameters in real time. Implementation of field oriented control of a permanent magnet synchronous motor shows that the motor has satisfactory response in terms of torque ripple and speed response. Nonlinear control, including Sliding Mode Controller and State Dependent Linear Matrix Inequality Controller, are also proposed as a powerful control technique to govern the speed of the permanent magnet synchronous motor in hybrid vehicle applications. In Part III, we discuss the hydraulic system design. Finally, in Part IV, the dSPACE hardware controller is used for the overall control system design

Hydraulic Series Hybrid Baja Car

The Baja SAE competition is held annually by the Society of Automotive Engineers (SAE) in order to give students an opportunity to design and build a competitive off-road vehicle. In this competition every team uses the same 10 HP engine. In order to gain a competitive advantage over teams using traditional drive trains, this MQP designed and implemented a hybrid-hydraulic drive train in an existing Baja car. This system allows the car to continuously run its engine at maximum power and store excess energy generated by the engine for later use at the driver\u27s discretion. It is located in series with the engine and main drive shaft and consists of a hydraulic pump, motor, and accumulator. This system was field-tested to verify design calculations and prove the benefit of the system

A unified methodology for the power efficiency analysis of physical systems

In this paper, the problem of power efficiency evaluation for ports physical systems is investigated. The efficiency analysis that we perform highlights the necessary and sufficient conditions for the system to be passive, and outlines the guidelines for the efficiency maps computation. After addressing the problem from a formal point of view, the analysis is deepened for the case of two-ports linear and nonlinear physical systems, and for the cases of three and four-ports linear systems. The efficiency analysis and the computation of the efficiency maps are addressed as a function of the power variables characterizing all the energetic ports of the considered systems. Furthermore, the salient properties of the efficiency are highlighted and discussed. The theoretical analysis which is developed is then applied to some physical systems of interest for industries and engineers working in the electromechanical, hydraulic and automotive fields: a DC electric motor driving an hydraulic pump for the two-ports systems class, a single-stage planetary gear set for the three-ports systems class, and a Ravigneaux planetary gear set for the four-ports systems class