High performance binary LDPC-coded OFDM systems over indoor PLC channels

Power line communication (PLC) technology is actually among the most renowned technologies for home environments due to their low-cost installation opportunities. In this study, the bit error rate (BER) performances of binary low-density parity check (LDPC) coded orthogonal frequency-division multiplexing (OFDM) systems have been considered over indoor PLC channels. Performances comparison of diverse soft and hard decision LDPC decoder schemes such as Min-Sum (MS), weighted bit flipping (WBF), gradient descent bit-flip (GDBF), noisy gradient descent bit-flip (NGDBF) and its few variants including the single-bit NGDBF (S-NGDBF), multi-bit NGDBF (M-NGDBF) and smoothed-multi-bit NGDBF (SM-NGDBF) decoders were examined in the modeled network. To evaluate the BER performance analyses three different PLC channel scenarios were generated by using new and more realistic PLC channel model proposal were also employed. All of the simulations performed in Canete’s PLC channel model showed that remarkable performance improvement can be achieved by using short-length LDPC codes. Especially, the improvements are striking when the MS or SM-NGDBF decoding algorithms are employed on the receiver side

Improving Image Transmission by Using Polar Codes and Successive Cancellation List Decoding

This paper investigates the transmission of grey scale images encoded with polar codes and de-coded with successive cancellation list (SCL) decoders in the presence of additive white Gaussian noise. Po-lar codes seem a natural choice for this application be-cause of their error-correction efficiency combined with fast decoding. Computer simulations are carried out for evaluating the influence of different code block lengths in the quality of the decoded images. At the encoder a default polar code construction is used in combination with binary phase shift keying modulation. The results are compared with those obtained by using the clas-sic successive cancellation (SC) decoding introduced by Arikan. The quality of the reconstructed images is assessed by using peak signal to noise ratio (PSNR) and the structural similarity (SSIM) index. Curves of PSNR and SSIM versus code block length are presented il-lustrating the improvement in performance of SCL in comparison with SC.</p

Image transmission over fading channels using RS-CC versus LDPC coding

In this paper we present effective means of digital image transmission by means of Forward Error Correcting (FEC) schemes and Orthogonal Frequency Division Multiplexing (OFDM). The transmission was simulated over the AWGN and a Rayleigh fading channel whose power delay profile was adopted from the ITU channel model. The FEC and OFDM parameters were adopted from the DVB-T, WiMAX, and DVB-T2 standards. The results presented herein are in terms of BER, PSNR and visual performances. It is evident from the presented results that effective FEC schemes are necessary for reliable transmission of digital media in a mobile wireless scenario. Image transmission over fading channels using RS-CC versus LDPC coding

Self-concatenated code design and its application in power-efficient cooperative communications

In this tutorial, we have focused on the design of binary self-concatenated coding schemes with the help of EXtrinsic Information Transfer (EXIT) charts and Union bound analysis. The design methodology of future iteratively decoded self-concatenated aided cooperative communication schemes is presented. In doing so, we will identify the most important milestones in the area of channel coding, concatenated coding schemes and cooperative communication systems till date and suggest future research directions

Near-capacity fixed-rate and rateless channel code constructions

Fixed-rate and rateless channel code constructions are designed for satisfying conflicting design tradeoffs, leading to codes that benefit from practical implementations, whilst offering a good bit error ratio (BER) and block error ratio (BLER) performance. More explicitly, two novel low-density parity-check code (LDPC) constructions are proposed; the first construction constitutes a family of quasi-cyclic protograph LDPC codes, which has a Vandermonde-like parity-check matrix (PCM). The second construction constitutes a specific class of protograph LDPC codes, which are termed as multilevel structured (MLS) LDPC codes. These codes possess a PCM construction that allows the coexistence of both pseudo-randomness as well as a structure requiring a reduced memory. More importantly, it is also demonstrated that these benefits accrue without any compromise in the attainable BER/BLER performance. We also present the novel concept of separating multiple users by means of user-specific channel codes, which is referred to as channel code division multiple access (CCDMA), and provide an example based on MLS LDPC codes. In particular, we circumvent the difficulty of having potentially high memory requirements, while ensuring that each user’s bits in the CCDMA system are equally protected. With regards to rateless channel coding, we propose a novel family of codes, which we refer to as reconfigurable rateless codes, that are capable of not only varying their code-rate but also to adaptively modify their encoding/decoding strategy according to the near-instantaneous channel conditions. We demonstrate that the proposed reconfigurable rateless codes are capable of shaping their own degree distribution according to the nearinstantaneous requirements imposed by the channel, but without any explicit channel knowledge at the transmitter. Additionally, a generalised transmit preprocessing aided closed-loop downlink multiple-input multiple-output (MIMO) system is presented, in which both the channel coding components as well as the linear transmit precoder exploit the knowledge of the channel state information (CSI). More explicitly, we embed a rateless code in a MIMO transmit preprocessing scheme, in order to attain near-capacity performance across a wide range of channel signal-to-ratios (SNRs), rather than only at a specific SNR. The performance of our scheme is further enhanced with the aid of a technique, referred to as pilot symbol assisted rateless (PSAR) coding, whereby a predetermined fraction of pilot bits is appropriately interspersed with the original information bits at the channel coding stage, instead of multiplexing pilots at the modulation stage, as in classic pilot symbol assisted modulation (PSAM). We subsequently demonstrate that the PSAR code-aided transmit preprocessing scheme succeeds in gleaning more information from the inserted pilots than the classic PSAM technique, because the pilot bits are not only useful for sounding the channel at the receiver but also beneficial for significantly reducing the computational complexity of the rateless channel decoder

Transformer-aided Wireless Image Transmission with Channel Feedback

This paper presents a novel wireless image transmission paradigm that can exploit feedback from the receiver, called DeepJSCC-ViT-f. We consider a block feedback channel model, where the transmitter receives noiseless/noisy channel output feedback after each block. The proposed scheme employs a single encoder to facilitate transmission over multiple blocks, refining the receiver's estimation at each block. Specifically, the unified encoder of DeepJSCC-ViT-f can leverage the semantic information from the source image, and acquire channel state information and the decoder's current belief about the source image from the feedback signal to generate coded symbols at each block. Numerical experiments show that our DeepJSCC-ViT-f scheme achieves state-of-the-art transmission performance with robustness to noise in the feedback link. Additionally, DeepJSCC-ViT-f can adapt to the channel condition directly through feedback without the need for separate channel estimation. We further extend the scope of the DeepJSCC-ViT-f approach to include the broadcast channel, which enables the transmitter to generate broadcast codes in accordance with signal semantics and channel feedback from individual receivers

Advanced constellation and demapper schemes for next generation digital terrestrial television broadcasting systems

206 p.Esta tesis presenta un nuevo tipo de constelaciones llamadas no uniformes. Estos esquemas presentan una eficacia de hasta 1,8 dB superior a las utilizadas en los últimos sistemas de comunicaciones de televisión digital terrestre y son extrapolables a cualquier otro sistema de comunicaciones (satélite, móvil, cable¿). Además, este trabajo contribuye al diseño de constelaciones con una nueva metodología que reduce el tiempo de optimización de días/horas (metodologías actuales) a horas/minutos con la misma eficiencia. Todas las constelaciones diseñadas se testean bajo una plataforma creada en esta tesis que simula el estándar de radiodifusión terrestre más avanzado hasta la fecha (ATSC 3.0) bajo condiciones reales de funcionamiento.Por otro lado, para disminuir la latencia de decodificación de estas constelaciones esta tesis propone dos técnicas de detección/demapeo. Una es para constelaciones no uniformes de dos dimensiones la cual disminuye hasta en un 99,7% la complejidad del demapeo sin empeorar el funcionamiento del sistema. La segunda técnica de detección se centra en las constelaciones no uniformes de una dimensión y presenta hasta un 87,5% de reducción de la complejidad del receptor sin pérdidas en el rendimiento.Por último, este trabajo expone un completo estado del arte sobre tipos de constelaciones, modelos de sistema, y diseño/demapeo de constelaciones. Este estudio es el primero realizado en este campo

An improvement and a fast DSP implementation of the bit flipping algorithms for low density parity check decoder

For low density parity check (LDPC) decoding, hard-decision algorithms are sometimes more suitable than the soft-decision ones. Particularly in the high throughput and high speed applications. However, there exists a considerable gap in performances between these two classes of algorithms in favor of soft-decision algorithms.  In order to reduce this gap, in this work we introduce two new improved versions of the hard-decision algorithms, the adaptative gradient descent bit-flipping (AGDBF) and adaptative reliability ratio weighted GDBF (ARRWGDBF).  An adaptative weighting and correction factor is introduced in each case to improve the performances of the two algorithms allowing an important gain of bit error rate. As a second contribution of this work a real time implementation of the proposed solutions on a digital signal processors (DSP) is performed in order to optimize and improve the performance of these new approchs. The results of numerical simulations and DSP implementation reveal a faster convergence with a low processing time and a reduction in consumed memory resources when compared to soft-decision algorithms. For the irregular LDPC code, our approachs achieves gains of 0.25 and 0.15 dB respectively for the AGDBF and ARRWGDBF algorithms