A performance, energy consumption and reliability evaluation of workload distribution on heterogeneous devices

The constant need of higher performances and reduced power consumption has lead vendors to design heterogeneous devices that embed traditional Central Process Unit (CPU) and an accelerator, like a Graphics Processing Unit (GPU) or Field-programmable Gate Array (FPGA). When the CPU and the accelerator are used collaboratively the device computational performances reach their peak. However, the higher amount of resources employed for computation has, potentially, the side effect of increasing soft error rate. This thesis evaluates the reliability behaviour of AMD Kaveri Accelerated Processing Units (APU) executing four heterogeneous applications, each one representing an algorithm class. The workload is gradually distributed from the CPU to the GPU and both the energy consumption and execution time are measured. Then, an accelerated neutron beam was used to measure the realistic error rates of the different workload distributions. Finally, we evaluate which configuration provides the lowest error rate or allows the computation of the highest amount of data before experiencing a failure. As is shown in this thesis, energy consumption and execution time are mold by the same trend while error rates highly depend on algorithm class and workload distribution. Additionally, we show that, in most cases, the most reliable workload distribution is the one that delivers the highest performances. As experimentally proven, by choosing the correct workload distribution the device reliability can increase of up to 90x.A constante necessidade de maior desempenho e menor consumo de energia levou aos fabricantes a projetar dispositivos heterogêneos que incorporam uma Unidade Central de Processameno (CPU) tradicional e um acelerador, como uma Unidade de Processamento Gráfico (GPU) ou um Arranjo de Portas Programáveis em Campo (FPGA). Quando a CPU e o acelerador são usados de forma colaborativa, o desempenho computacional do dispositivo atinge seu pico. No entanto, a maior quantidade de recursos empregados para o cálculo tem, potencialmente, o efeito colateral de aumentar a taxa de erros. Esta tese avalia a confiabilidade das AMD Kaveri "Accelerated Processing Units"(APUs) executando quatro aplicações heterogêneas, cada uma representando uma classe de algoritmos. A carga de trabalho é gradualmente distribuída da CPU para a GPU e o consumo de energia e o tempo de execução são medidos. Em seguida, um feixe de neutrões é utilizado para medir as taxas de erro reais das diferentes distribuições de carga de trabalho. Por fim, avalia-se qual configuração fornece a menor taxa de erro ou permite o cálculo da maior quantidade de dados antes de ocorrer uma falha. Como é mostrado nesta tese, o consumo de energia e o tempo de execução são moldados pela mesma tendência, enquanto as taxas de erro dependem da classe de algoritmos e da distribuição da carga de trabalho. Além disso, é mostrado que, na maioria dos casos, a distribuição de carga de trabalho mais confiável é a que fornece o maior desempenho. Como comprovado experimentalmente, ao escolher a distribuição de carga de trabalho correta, a confiabilidade do dispositivo pode aumentar até 9 vezes

Toward Reliable, Secure, and Energy-Efficient Multi-Core System Design

Computer hardware researchers have perennially focussed on improving the performance of computers while stipulating the energy consumption under a strict budget. While several innovations over the years have led to high performance and energy efficient computers, more challenges have also emerged as a fallout. For example, smaller transistor devices in modern multi-core systems are afflicted with several reliability and security concerns, which were inconceivable even a decade ago. Tackling these bottlenecks happens to negatively impact the power and performance of the computers. This dissertation explores novel techniques to gracefully solve some of the pressing challenges of the modern computer design. Specifically, the proposed techniques improve the reliability of on-chip communication fabric under a high power supply noise, increase the energy-efficiency of low-power graphics processing units, and demonstrate an unprecedented security loophole of the low-power computing paradigm through rigorous hardware-based experiments

Hardware Implementation of Deep Network Accelerators Towards Healthcare and Biomedical Applications

With the advent of dedicated Deep Learning (DL) accelerators and neuromorphic processors, new opportunities are emerging for applying deep and Spiking Neural Network (SNN) algorithms to healthcare and biomedical applications at the edge. This can facilitate the advancement of the medical Internet of Things (IoT) systems and Point of Care (PoC) devices. In this paper, we provide a tutorial describing how various technologies ranging from emerging memristive devices, to established Field Programmable Gate Arrays (FPGAs), and mature Complementary Metal Oxide Semiconductor (CMOS) technology can be used to develop efficient DL accelerators to solve a wide variety of diagnostic, pattern recognition, and signal processing problems in healthcare. Furthermore, we explore how spiking neuromorphic processors can complement their DL counterparts for processing biomedical signals. After providing the required background, we unify the sparsely distributed research on neural network and neuromorphic hardware implementations as applied to the healthcare domain. In addition, we benchmark various hardware platforms by performing a biomedical electromyography (EMG) signal processing task and drawing comparisons among them in terms of inference delay and energy. Finally, we provide our analysis of the field and share a perspective on the advantages, disadvantages, challenges, and opportunities that different accelerators and neuromorphic processors introduce to healthcare and biomedical domains. This paper can serve a large audience, ranging from nanoelectronics researchers, to biomedical and healthcare practitioners in grasping the fundamental interplay between hardware, algorithms, and clinical adoption of these tools, as we shed light on the future of deep networks and spiking neuromorphic processing systems as proponents for driving biomedical circuits and systems forward.Comment: Submitted to IEEE Transactions on Biomedical Circuits and Systems (21 pages, 10 figures, 5 tables

A design methodology for robust, energy-efficient, application-aware memory systems

Memory design is a crucial component of VLSI system design from area, power and performance perspectives. To meet the increasingly challenging system specifications, architecture, circuit and device level innovations are required for existing memory technologies. Emerging memory solutions are widely explored to cater to strict budgets. This thesis presents design methodologies for custom memory design with the objective of power-performance benefits across specific applications. Taking example of STTRAM (spin transfer torque random access memory) as an emerging memory candidate, the design space is explored to find optimal energy design solution. A thorough thermal reliability study is performed to estimate detection reliability challenges and circuit solutions are proposed to ensure reliable operation. Adoption of the application-specific optimal energy solution is shown to yield considerable energy benefits in a read-heavy application called MBC (memory based computing). Circuit level customizations are studied for the volatile SRAM (static random access memory) memory, which will provide improved energy-delay product (EDP) for the same MBC application. Memory design has to be aware of upcoming challenges from not only the application nature but also from the packaging front. Taking 3D die-folding as an example, SRAM performance shift under die-folding is illustrated. Overall the thesis demonstrates how knowledge of the system and packaging can help in achieving power efficient and high performance memory design.Ph.D

Energy efficient hardware acceleration of multimedia processing tools

The world of mobile devices is experiencing an ongoing trend of feature enhancement and generalpurpose multimedia platform convergence. This trend poses many grand challenges, the most pressing being their limited battery life as a consequence of delivering computationally demanding features. The envisaged mobile application features can be considered to be accelerated by a set of underpinning hardware blocks Based on the survey that this thesis presents on modem video compression standards and their associated enabling technologies, it is concluded that tight energy and throughput constraints can still be effectively tackled at algorithmic level in order to design re-usable optimised hardware acceleration cores. To prove these conclusions, the work m this thesis is focused on two of the basic enabling technologies that support mobile video applications, namely the Shape Adaptive Discrete Cosine Transform (SA-DCT) and its inverse, the SA-IDCT. The hardware architectures presented in this work have been designed with energy efficiency in mind. This goal is achieved by employing high level techniques such as redundant computation elimination, parallelism and low switching computation structures. Both architectures compare favourably against the relevant pnor art in the literature. The SA-DCT/IDCT technologies are instances of a more general computation - namely, both are Constant Matrix Multiplication (CMM) operations. Thus, this thesis also proposes an algorithm for the efficient hardware design of any general CMM-based enabling technology. The proposed algorithm leverages the effective solution search capability of genetic programming. A bonus feature of the proposed modelling approach is that it is further amenable to hardware acceleration. Another bonus feature is an early exit mechanism that achieves large search space reductions .Results show an improvement on state of the art algorithms with future potential for even greater savings

Simulation and implementation of novel deep learning hardware architectures for resource constrained devices

Corey Lammie designed mixed signal memristive-complementary metal–oxide–semiconductor (CMOS) and field programmable gate arrays (FPGA) hardware architectures, which were used to reduce the power and resource requirements of Deep Learning (DL) systems; both during inference and training. Disruptive design methodologies, such as those explored in this thesis, can be used to facilitate the design of next-generation DL systems

Virtualizing Reconfigurable Architectures: From Fpgas To Beyond

With field-programmable gate arrays (FPGAs) being widely deployed in data centers to enhance the computing performance, an efficient virtualization support is required to fully unleash the potential of cloud FPGAs. However, the system support for FPGAs in the context of the cloud environment is still in its infancy, which leads to a low resource utilization due to the tight coupling between compilation and resource allocation. Moreover, the system support proposed in existing works is limited to a homogeneous FPGA cluster comprising identical FPGA devices, which is hard to be extended to a heterogeneous FPGA cluster that comprises multiple types of FPGAs. As the FPGA cloud is expected to become increasingly heterogeneous due to the hardware rolling upgrade strategy, it is necessary to provide efficient virtualization support for the heterogeneous FPGA cluster. In this dissertation, we first identify three pairs of conflicting requirements from runtime management and offline compilation, which are related to the tradeoff between flexibility and efficiency. These conflicting requirements are the fundamental reason why the single-level abstraction proposed in prior works for the homogeneous FPGA cluster cannot be trivially extended to the heterogeneous cluster. To decouple these conflicting requirements, we provide a two-level system abstraction. Specifically, the high-level abstraction is FPGA-agnostic and provides a simple and homogeneous view of the FPGA resources to simplify the runtime management and maximize the flexibility. On the contrary, the low-level abstraction is FPGA-specific and exposes sufficient low-level hardware details to the compilation framework to ensure the mapping quality and maximize the efficiency. This generic two-level system abstraction can also be specialized to the homogeneous FPGA cluster and/or be extended to leverage application-specific information to further improve the efficiency. We also develop a compilation framework and a modular runtime system with a heuristic-based runtime management policy to support this two-level system abstraction. By enabling a dynamic FPGA sharing at the sub-FPGA granularity, the proposed virtualization solution can deploy 1.62x more applications using the same amount of FPGA resources and reduce the compilation time by 22.6% (perform as many compilation tasks in parallel as possible) with an acceptable virtualization overhead, i.e., Finally, we use Liquid Silicon as a case study to show that the proposed virtualization solution can be extended to other spatial reconfigurable architectures. Liquid Silicon is a homogeneous reconfigurable architecture enabled by the non-volatile memory technology (i.e., RRAM). It extends the configuration capability of existing FPGAs from computation to the whole spectrum ranging from computation to data storage. It allows users to better customize hardware by flexibly partitioning hardware resources between computation and memory based on the actual usage. Instead of naively applying the proposed virtualization solution onto Liquid Silicon, we co-optimize the system abstraction and Liquid Silicon architecture to improve the performance

Reconfigurable Computing Systems for Robotics using a Component-Oriented Approach

Robotic platforms are becoming more complex due to the wide range of modern applications, including multiple heterogeneous sensors and actuators. In order to comply with real-time and power-consumption constraints, these systems need to process a large amount of heterogeneous data from multiple sensors and take action (via actuators), which represents a problem as the resources of these systems have limitations in memory storage, bandwidth, and computational power. Field Programmable Gate Arrays (FPGAs) are programmable logic devices that offer high-speed parallel processing. FPGAs are particularly well-suited for applications that require real-time processing, high bandwidth, and low latency. One of the fundamental advantages of FPGAs is their flexibility in designing hardware tailored to specific needs, making them adaptable to a wide range of applications. They can be programmed to pre-process data close to sensors, which reduces the amount of data that needs to be transferred to other computing resources, improving overall system efficiency. Additionally, the reprogrammability of FPGAs enables them to be repurposed for different applications, providing a cost-effective solution that needs to adapt quickly to changing demands. FPGAs' performance per watt is close to that of Application-Specific Integrated Circuits (ASICs), with the added advantage of being reprogrammable. Despite all the advantages of FPGAs (e.g., energy efficiency, computing capabilities), the robotics community has not fully included them so far as part of their systems for several reasons. First, designing FPGA-based solutions requires hardware knowledge and longer development times as their programmability is more challenging than Central Processing Units (CPUs) or Graphics Processing Units (GPUs). Second, porting a robotics application (or parts of it) from software to an accelerator requires adequate interfaces between software and FPGAs. Third, the robotics workflow is already complex on its own, combining several fields such as mechanics, electronics, and software. There have been partial contributions in the state-of-the-art for FPGAs as part of robotics systems. However, a study of FPGAs as a whole for robotics systems is missing in the literature, which is the primary goal of this dissertation. Three main objectives have been established to accomplish this. (1) Define all components required for an FPGAs-based system for robotics applications as a whole. (2) Establish how all the defined components are related. (3) With the help of Model-Driven Engineering (MDE) techniques, generate these components, deploy them, and integrate them into existing solutions. The component-oriented approach proposed in this dissertation provides a proper solution for designing and implementing FPGA-based designs for robotics applications. The modular architecture, the tool 'FPGA Interfaces for Robotics Middlewares' (FIRM), and the toolchain 'FPGA Architectures for Robotics' (FAR) provide a set of tools and a comprehensive design process that enables the development of complex FPGA-based designs more straightforwardly and efficiently. The component-oriented approach contributed to the state-of-the-art in FPGA-based designs significantly for robotics applications and helps to promote their wider adoption and use by specialists with little FPGA knowledge