D13.2 Techniques and performance analysis on energy- and bandwidth-efficient communications and networking

Deliverable D13.2 del projecte europeu NEWCOM#The report presents the status of the research work of the various Joint Research Activities (JRA) in WP1.3 and the results that were developed up to the second year of the project. For each activity there is a description, an illustration of the adherence to and relevance with the identified fundamental open issues, a short presentation of the main results, and a roadmap for the future joint research. In the Annex, for each JRA, the main technical details on specific scientific activities are described in detail.Peer ReviewedPostprint (published version

Study of continuous-phase four-state modulation for cordless telecommunications. Assessment by simulation of CP-QFSK as an alternative modulation scheme for TDMA digital cordless telecommunications systems operating in indoor applications

One of the major driving elements behind the explosive boom in wireless revolution is the advances in the field of modulation which plays a fundamental role in any communication system, and especially in cellular radio systems. Hence, the elaborate choice of an efficient modulation scheme is of paramount importance in the design and employment of any communications system. Work presented in this thesis is an investigation (study) of the feasibility of whether multilevel FSK modulation scheme would provide a viable alternative modem that can be employed in TDMA cordless communications systems. In the thesis the design and performance analysis of a non-coherent multi-level modem that offers a great deal of bandwidth efficiency and hardware simplicity is studied in detail. Simulation results demonstrate that 2RC pre-modulation filter pulse shaping with a modulation index of 0.3, and pre-detection filter normalized equivalent noise bandwidth of 1.5 are optimum system parameter values. Results reported in chapter 5 signify that an adjacent channel rejection factor of around 40 dB has been achieved at channel spacing of 1.5 times the symbol rate while the DECT system standards stipulated a much lower rejection limit criterion (25-30dB), implying that CP-QFSK modulation out-performs the conventional GMSK as it causes significantly less ACI, thus it is more spectrally efficient in a multi-channel system. However, measured system performance in terms of BER indicates that this system does not coexist well with other interferers as at delay spreads between 100ns to 200ns, which are commonly encountered in such indoor environment, a severe degradation in system performance apparently caused by multi-path fading has been noticed, and there exists a noise floor of about 40 dB, i.e. high irreducible error rate of less than 5.10-3. Implementing MRC diversity combiner and BCH codec has brought in a good gain.Higher Education Ministr

A Vision and Framework for the High Altitude Platform Station (HAPS) Networks of the Future

A High Altitude Platform Station (HAPS) is a network node that operates in the stratosphere at an of altitude around 20 km and is instrumental for providing communication services. Precipitated by technological innovations in the areas of autonomous avionics, array antennas, solar panel efficiency levels, and battery energy densities, and fueled by flourishing industry ecosystems, the HAPS has emerged as an indispensable component of next-generations of wireless networks. In this article, we provide a vision and framework for the HAPS networks of the future supported by a comprehensive and state-of-the-art literature review. We highlight the unrealized potential of HAPS systems and elaborate on their unique ability to serve metropolitan areas. The latest advancements and promising technologies in the HAPS energy and payload systems are discussed. The integration of the emerging Reconfigurable Smart Surface (RSS) technology in the communications payload of HAPS systems for providing a cost-effective deployment is proposed. A detailed overview of the radio resource management in HAPS systems is presented along with synergistic physical layer techniques, including Faster-Than-Nyquist (FTN) signaling. Numerous aspects of handoff management in HAPS systems are described. The notable contributions of Artificial Intelligence (AI) in HAPS, including machine learning in the design, topology management, handoff, and resource allocation aspects are emphasized. The extensive overview of the literature we provide is crucial for substantiating our vision that depicts the expected deployment opportunities and challenges in the next 10 years (next-generation networks), as well as in the subsequent 10 years (next-next-generation networks).Comment: To appear in IEEE Communications Surveys & Tutorial

Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges

The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral efficiency and decreases latency, which are two key drivers pushing the performance expectations of next-generation mobile networks. In less than ten years, in-band FD has advanced from being demonstrated in research labs to being implemented in standards and products, presenting new opportunities to utilize its foundational concepts. Some of the most significant opportunities include using FD to enable wireless networks to sense the physical environment, integrate sensing and communication applications, develop integrated access and backhaul solutions, and work with smart signal propagation environments powered by reconfigurable intelligent surfaces. However, these new opportunities also come with new challenges for large-scale commercial deployment of FD technology, such as managing self-interference, combating cross-link interference in multi-cell networks, and coexistence of dynamic time division duplex, subband FD and FD networks.Comment: 21 pages, 15 figures, accepted to an IEEE Journa

Evaluating Wetland Expansion In A Tallgrass Prairie-Wetland Restoration

Remote sensing is an effective tool to inventory and monitor wetlands at large spatial scales. This study examined the effect of wetland restoration practices at Glacial Ridge National Wildlife Refuge (GRNWR) in northwest Minnesota on the distribution, location, size and temporal changes of wetlands. A Geographic Object-Based Image Analysis (GEOBIA) land cover classification method was applied that integrated spectral data, LiDAR elevation, and LiDAR derived ancillary data of slope, aspect, and TWI. Accuracy of remote wetland mapping was compared with onsite wetland delineation. The GEOBIA method produced land cover classifications with high overall accuracy (88 – 91 percent). Wetland area from a June 12, 2007 classified image was 20.09 km2 out of a total area of 147.3 km2. Classification of a July 22, 2014 image, showed wetlands covering an area of 37.96 km2. The results illustrate how wetland areas have changed spatially and temporally within the study landscape. These changes in hydrologic conditions encourage additional wetland development and expansion as plant communities colonize rewetted areas, and soil conditions develop characteristics typical of hydric soils

Wireless optical backhauling for optical attocell networks

The backhaul of tens and hundreds of light fidelity (LiFi)-enabled luminaires constitutes a major challenge. The problem of backhauling for optical attocell networks has been approached by a number of wired solutions such as in-building power line communication (PLC), Ethernet and optical fiber. In this work, an alternative solution is proposed based on wireless optical communication in visible light (VL) and infrared (IR) bands. The proposed solution is thoroughly elaborated using a system level methodology. For a multi-user optical attocell network based on direct current biased optical orthogonal frequency division multiplexing (DCO-OFDM) and decode-and-forward (DF) relaying, detailed modeling and analysis of signal-to-interference-plus- noise (SINR) and end-to-end sum rate are presented, taking into account the effects of inter-backhaul and backhaul-to-access interferences. Inspired by concepts developed for radio frequency (RF) cellular networks, full-reuse visible light (FR-VL) and in-band visible light (IB-VL) bandwidth allocation policies are proposed to realize backhauling in the VL band. The transmission power is opportunistically minimized to enhance the backhaul power efficiency. For a two-tier FR-VL network, there is a technological challenge due to the limited capacity of the bottleneck backhaul link. The IR band is employed to add an extra degree of freedom for the backhaul capacity. For the IR backhaul system, a power-bandwidth tradeoff formulation is presented and closed form analytical expressions are derived for the corresponding power control coefficients. The sum rate performance of the network is studied using extensive Monte Carlo simulations. In addition, the effect of imperfect alignment in backhaul links is studied by using Monte Carlo simulation techniques. The emission semi-angle of backhaul LEDs is identified as a determining factor for the network performance. With the assumption that the access and backhaul systems share the same propagation medium, a large semi-angle of backhaul LEDs results in a substantial degradation in performance especially under FR-VL backhauling. However, it is shown both theoretically and by simulations that by choosing a sufficiently small semi-angle value, the adverse effect of the backhaul interference is entirely eliminated. By employing a narrow light beam in the back-haul system, the application of wireless optical backhauling is extended to multi-tier optical attocell networks. As a result of multi-hop backhauling with a tree topology, new challenges arise concerning optimal scheduling of finite bandwidth and power resources of the bottleneck backhaul link, i.e., optimal bandwidth sharing and opportunistic power minimization. To tackle the former challenge, optimal user-based and cell-based scheduling algorithms are developed. The latter challenge is addressed by introducing novel adaptive power control (APC) and fixed power control (FPC) schemes. The proposed bandwidth scheduling policies and power control schemes are supported by an analysis of their corresponding power control coefficients. Furthermore, another possible application of wireless optical backhauling for indoor networks is in downlink base station (BS) cooperation. More specifically, novel cooperative transmission schemes of non-orthogonal DF (NDF) and joint transmission with DF (JDF) in conjunction with fractional frequency reuse (FFR) partitioning are proposed for an optical attocell downlink. Their performance gains over baseline scenarios are assessed using Monte Carlo simulations

Multipacket reception in LTE femtocell networks

Dissertação apresentada para obtenção do Grau de Mestre em Engenharia Electrotécnica e de ComputadoresDriven by the growing demand for high-speed broadband wireless services, LTE technology has emerged and evolve, promising high data rates to the demanding mobile users. Based on the 3rd Generation Partnership Project (3GPP) speci cations,Long Term Evo- lution Advanced (LTE-A) telecommunication services predict the existence of macro base stations, Enhanced Node B (eNB) and micro stations HeNB with low power that complements the network's coverage. This dissertation studies the complementary use of HeNBs (femtocells 3GPP terminology) to provide broadband services. It is essential to maintain the networks performance with the network densi cation phenomenon, which brings signi cant interference problems and consequently more collisions and lost packets. The use of SC-FDE in the downlink of a LTE-A femtocell network - speci cally multipacket reception (MPR), with an IB-DFE receiver employing Multipacket Detection (MPD) and SIC techniques is proposed. A new telecommunications concept named GC emerged with the increasing environmental concerns. This dissertation shows the performance results of an iterative MPR and proposes a green association algorithm to change the network layout according to the mobile users demands reducing the Base Station (BS)'s negative contribution to the network total energy consumption. The overall results show that the technologies employed are a solution to achieve a favorable trade-o between performance and Energy E ciency (EE), responding to the global demands (high data rates) and concerns (low energy consumption and carbon footprint reduction). Keywords: Long Term Evolution(LTE), Single Carrier with Frequency Domain Equalization (SC-FDE), Iterative Block-Decision Feedback Equalizer (IB-DFE), Home enhanced Node B (HeNB), Successive Interference Cancellation(SIC),Multipacket Reception(MPR), Green Communications (GC)FCT/MEC Femtocells(PTDC/EEATEL/120666/2010), OPPORTUNISTIC CR(PTDC/EEA-TEL/115981/2009) and ADIN(PTDC/EEI-TEL/2990/2012) project

Improving fractional frequency reuse (FFR) for interference mitigation in Multi-tier 4G wireless networks

Includes bibliography.The need to provide quality indoor coverage for mobile network users in an indoor environment has become paramount to communication service providers (CSPs). Femto-cells due to their low capital expenditure (CAPEX) and operating expenditure (OPEX) have seen widespread adoption as a possible solution to the indoor coverage challenge. The major drawback of its adoption is the possibility of erratic but significant interference to both the Femto-cell and the Macro-cell tiers owing to their Ad-hoc mode of deployment. The Fractional Frequency Reuse (FFR) is an interference mitigation scheme, due to its effectiveness and low complexity; it has been proposed to be an efficient technique of solving the problem of interference in the cross-boundary region. In this study, a critical analysis of the existing schemes revealed that Femto-cell users at the border between the cell centre region (CCR) and the cell edge region (CER) suffer cross-boundary interference. An algorithm that integrates a buffer zone between the existing CCR and CER has been developed to solve the cross-boundary interference challenge experienced by the Femto-cell users. A system level simulation implemented in MATLAB was used to evaluate the developed algorithm. The network performance (in terms of user-achieved signal-to-interference-plus-noise ratio (SINR) and its daughter metrics such as channel capacity and throughput) was estimated. In terms of the SINR, the performance improvement recorded for Femto-cell users at the border region after the implementation of the buffer zone was more than eighty per cent (80%). There were significant improvements in terms of the channel capacity and throughput for the Femto-users present at the buffer region with the implementation of the developed algorithm