Power Beacon’s deployment optimization for wirelessly powering massive Internet of Things networks

Abstract. The fifth-generation (5G) and beyond wireless cellular networks promise the native support to, among other use cases, the so-called Internet of Things (IoT). Different from human-based cellular services, IoT networks implement a novel vision where ordinary machines possess the ability to autonomously sense, actuate, compute, and communicate throughout the Internet. However, as the number of connected devices grows larger, an urgent demand for energy-efficient communication technologies arises. A key challenge related to IoT devices is that their very small form factor allows them to carry just a tiny battery that might not be even possible to replace due to installation conditions, or too costly in terms of maintenance because of the massiveness of the network. This issue limits the lifetime of the network and compromises its reliability. Wireless energy transfer (WET) has emerged as a potential candidate to replenish sensors’ batteries or to sustain the operation of battery-free devices, as it provides a controllable source of energy over-the-air. Therefore, WET eliminates the need for regular maintenance, allows sensors’ form factor reduction, and reduces the battery disposal that contributes to the environment pollution. In this thesis, we review some WET-enabled scenarios and state-of-the-art techniques for implementing WET in IoT networks. In particular, we focus our attention on the deployment optimization of the so-called power beacons (PBs), which are the energy transmitters for charging a massive IoT deployment subject to a network-wide probabilistic energy outage constraint. We assume that IoT sensors’ positions are unknown at the PBs, and hence we maximize the average incident power on the worst network location. We propose a linear-time complexity algorithm for optimizing the PBs’ positions that outperforms benchmark methods in terms of minimum average incident power and computation time. Then, we also present some insights on the maximum coverage area under certain propagation conditions

Full-View Coverage Problems in Camera Sensor Networks

Camera Sensor Networks (CSNs) have emerged as an information-rich sensing modality with many potential applications and have received much research attention over the past few years. One of the major challenges in research for CSNs is that camera sensors are different from traditional scalar sensors, as different cameras from different positions can form distinct views of the object in question. As a result, simply combining the sensing range of the cameras across the field does not necessarily form an effective camera coverage, since the face image (or the targeted aspect) of the object may be missed. The angle between the object\u27s facing direction and the camera\u27s viewing direction is used to measure the quality of sensing in CSNs instead. This distinction makes the coverage verification and deployment methodology dedicated to conventional sensor networks unsuitable. A new coverage model called full-view coverage can precisely characterize the features of coverage in CSNs. An object is full-view covered if there is always a camera to cover it no matter which direction it faces and the camera\u27s viewing direction is sufficiently close to the object\u27s facing direction. In this dissertation, we consider three areas of research for CSNS: 1. an analytical theory for full-view coverage; 2. energy efficiency issues in full-view coverage CSNs; 3. Multi-dimension full-view coverage theory. For the first topic, we propose a novel analytical full-view coverage theory, where the set of full-view covered points is produced by numerical methodology. Based on this theory, we solve the following problems. First, we address the full-view coverage holes detection problem and provide the healing solutions. Second, we propose $k$-Full-View-Coverage algorithms in camera sensor networks. Finally, we address the camera sensor density minimization problem for triangular lattice based deployment in full-view covered camera sensor networks, where we argue that there is a flaw in the previous literature, and present our corresponding solution. For the second topic, we discuss lifetime and full-view coverage guarantees through distributed algorithms in camera sensor networks. Another energy issue we discuss is about object tracking problems in full-view coverage camera sensor networks. Next, the third topic addresses multi-dimension full-view coverage problem where we propose a novel 3D full-view coverage model, and we tackle the full-view coverage optimization problem in order to minimize the number of camera sensors and demonstrate a valid solution. This research is important due to the numerous applications for CSNs. Especially some deployment can be in remote locations, it is critical to efficiently obtain accurate meaningful data

Integrated placement and routing of relay nodes for fault-tolerant hierarchical sensor networks

In two-tiered sensor networks, using higher-powered relay nodes as cluster heads has been shown to lead to further improvements in network performance. Placement of such relay nodes focuses on achieving specified coverage and connectivity requirements with as few relay nodes as possible. Existing placement strategies typically are unaware of energy dissipation due to routing and are not capable of optimizing the routing scheme and placement concurrently. We, in this thesis, propose an integrated integer linear program (ILP) formulation that determines the minimum number of relay nodes, along with their locations and a suitable communication strategy such that the network has a guaranteed lifetime as well as ensuring the pre-specified level of coverage (ks) and connectivity (kr). We also present an intersection based approach for creating the initial set of potential relay node positions, which are used by our ILP, and evaluate its performance under different conditions. Experimental results on networks with hundreds of sensor nodes show that our approach leads to significant improvement over existing energy-unaware placement schemes

Achieving Minimum Coverage Breach under Bandwidth Constraints in Wireless Sensor Networks

This paper addresses the coverage breach problem in wireless sensor networks with limited bandwidths. In wireless sensor networks, sensor nodes are powered by batteries. To make efficient use of battery energy is critical to sensor network lifetimes. When targets are redundantly covered by multiple sensors, especially in stochastically deployed sensor networks, it is possible to save battery energy by organizing sensors into mutually exclusive subsets and alternatively activating only one subset at any time. Active nodes are responsible for sensing, computing and communicating. While the coverage of each subset is an important metric for sensor organization, the size of each subset also plays an important role in sensor network performance because when active sensors periodically send data to base stations, contention for channel access must be considered. The number of available channels imposes a limit on the cardinality of each subset. Coverage breach happens when a subset of sensors cannot completely cover all the targets. To make efficient use of both energy and bandwidth with a minimum coverage breach is the goal of sensor network design. This paper presents the minimum breach problem using a mathematical model, studies the computational complexity of the problem, and provides two approximate heuristics. Effects of increasing the number of channels and increasing the number of sensors on sensor network coverage are studied through numerical simulations. Overall, the simulation results reveal that when the number of sensors increases, network lifetimes can be improved without loss of network coverage if there is no bandwidth constraint; with bandwidth constraints, network lifetimes may be improved further at the cost of coverage breach

Wireless Network Design and Optimization: From Social Awareness to Security

abstract: A principal goal of this dissertation is to study wireless network design and optimization with the focus on two perspectives: 1) socially-aware mobile networking and computing; 2) security and privacy in wireless networking. Under this common theme, this dissertation can be broadly organized into three parts. The first part studies socially-aware mobile networking and computing. First, it studies random access control and power control under a social group utility maximization (SGUM) framework. The socially-aware Nash equilibria (SNEs) are derived and analyzed. Then, it studies mobile crowdsensing under an incentive mechanism that exploits social trust assisted reciprocity (STAR). The efficacy of the STAR mechanism is thoroughly investigated. Next, it studies mobile users' data usage behaviors under the impact of social services and the wireless operator's pricing. Based on a two-stage Stackelberg game formulation, the user demand equilibrium (UDE) is analyzed in Stage II and the optimal pricing strategy is developed in Stage I. Last, it studies opportunistic cooperative networking under an optimal stopping framework with two-level decision-making. For both cases with or without dedicated relays, the optimal relaying strategies are derived and analyzed. The second part studies radar sensor network coverage for physical security. First, it studies placement of bistatic radar (BR) sensor networks for barrier coverage. The optimality of line-based placement is analyzed, and the optimal placement of BRs on a line segment is characterized. Then, it studies the coverage of radar sensor networks that exploits the Doppler effect. Based on a Doppler coverage model, an efficient method is devised to characterize Doppler-covered regions and an algorithm is developed to find the minimum radar density required for Doppler coverage. The third part studies cyber security and privacy in socially-aware networking and computing. First, it studies random access control, cooperative jamming, and spectrum access under an extended SGUM framework that incorporates negative social ties. The SNEs are derived and analyzed. Then, it studies pseudonym change for personalized location privacy under the SGUM framework. The SNEs are analyzed and an efficient algorithm is developed to find an SNE with desirable properties.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Mitigating the Event and Effect of Energy Holes in Multi-hop Wireless Sensor Networks Using an Ultra-Low Power Wake-up Receiver and an Energy Scheduling Technique

This research work presents an algorithm for extending network lifetime in multi-hop wireless sensor networks (WSN). WSNs face energy gap issues around sink nodes due to the transmission of large amounts of data through nearby sensor nodes. The limited power supply to the nodes limits the lifetime of the network, which makes energy efficiency crucial. Multi-hop communication has been proposed as an efficient strategy, but its power consumption remains a research challenge. In this study, an algorithm is developed to mitigate energy holes around the sink nodes by using a modified ultra-low-power wake-up receiver and an energy scheduling technique. Efficient power scheduling reduces the power consumption of the relay node, and when the residual power of the sensor node falls below a defined threshold, the power emitters charge the nodes to eliminate energy-hole problems. The modified wake-up receiver improves sensor sensitivity while staying within the micro-power budget. This study's simulations showed that the developed RF energy harvesting algorithm outperformed previous work, achieving a 30% improvement in average charged energy (AEC), a 0.41% improvement in average energy (AEH), an 8.39% improvement in the number of energy transmitters, an 8.59% improvement in throughput, and a 0.19 decrease in outage probability compared to the existing network lifetime enhancement of multi-hop wireless sensor networks by RF Energy Harvesting algorithm. Overall, the enhanced power efficiency technique significantly improves the performance of WSNs

Optimization and Communication in UAV Networks

UAVs are becoming a reality and attract increasing attention. They can be remotely controlled or completely autonomous and be used alone or as a fleet and in a large set of applications. They are constrained by hardware since they cannot be too heavy and rely on batteries. Their use still raises a large set of exciting new challenges in terms of trajectory optimization and positioning when they are used alone or in cooperation, and communication when they evolve in swarm, to name but a few examples. This book presents some new original contributions regarding UAV or UAV swarm optimization and communication aspects