Efficient Control of Active Transformers for Increasing the PV Hosting Capacity of LV Grids

The increased penetration of grid-connected photovoltaic (PV) systems in low-voltage (LV) grids creates concerns about overvoltage in these grids. The proposed methods to prevent overvoltage, such as reactive power absorption by PV inverters and active power management of customers, focus on decreasing the voltage rise along LV feeders, and the potential of active medium-voltage to low-voltage (MV/LV) transformers for overvoltage prevention has not been thoroughly investigated. This paper presents the application of active MV/LV transformers for increasing the PV hosting capacity of LV grids. The potential interferences between the operation of active transformers and the reactive power absorption by PV inverters are investigated, and a voltage droop control approach is proposed for the efficient control of these transformers during high PV generation periods. The proposed method can potentially increase the PV hosting capacity of the grid, while eliminating the need for a complex and centralized controller. The voltages of specific locations or the grid state estimations provide adequate data for adjustments of the droop parameters. The simulations and field test results associated with the implementation of the proposed method to a newly developed active LV grid with high PV penetration in Felsberg, Germany, confirm the efficiency of the proposed method

Hosting Capacity Assessment of Distribution Systems

The increasing penetration of distributed energy resources (DERs) in distribution systems may result in a number of technical problems such as over-voltage, overloading, maloperation of protection systems and power quality issues. One approach to address the above-mentioned issues is upgrading the distribution network, which is quite costly. The second approach is to limit the penetration of DERs to the hosting capacity (HC), which is defined as the maximum DER capacity that can be installed in a system without violating the operational constraints. Understanding this concept can assist utilities to ensure the reliable operation of the system. There have been different studies to identify the HC in a system. Nevertheless, the uncertainties associated with the DERs and loads have not been addressed properly in such studies. Besides, it is very difficult to quantify the findings of those studies and make general conclusions, as they were often based on specific networks, while their methods is time consuming in a big distribution network. Furthermore, the impact of voltage control schemes and emerging technologies, such as electric vehicles (EVs) and battery energy storage systems (BESSs) on the HC have not been studied, adequately. Thus, in this thesis, we propose a suitable HC assessment framework, as well as utilize some of the conventional and emerging resources to increase the HC

Impact of operation strategies of large scale battery systems on distribution grid planning in Germany

Due to the increasing penetration of fluctuating distributed generation electrical grids require reinforcement, in order to secure a grid operation in accordance with given technical specifications. This grid reinforcement often leads to over-dimensioning of the distribution grids. Therefore, traditional and recent advances in distribution grid planning are analysed and possible alternative applications with large scale battery storage systems are reviewed. The review starts with an examination of possible revenue streams along the value chain of the German electricity market. The resulting operation strategies of the two most promising business cases are discussed in detail, and a project overview in which these strategies are applied is presented. Finally, the impact of the operation strategies are assessed with regard to distribution grid planning.Postprint (author's final draft

Power quality and electromagnetic compatibility: special report, session 2

The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems. Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages). The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks: Block 1: Electric and Magnetic Fields, EMC, Earthing systems Block 2: Harmonics Block 3: Voltage Variation Block 4: Power Quality Monitoring Two Round Tables will be organised: - Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13) - Reliability Benchmarking - why we should do it? What should be done in future? (RT 15

Voltage Rise Problem in Distribution Networks with Distributed Generation: A Review of Technologies, Impact and Mitigation Approaches

Energy demand has constantly been on the rise due to aggressive industrialization and civilization. This rise in energy demand results in the massive penetration of distributed generation (DG) in the distribution network (DN) which has been a holistic approach to enhance the capacity of distribution networks. However, this has led to a number of issues in the low voltage network, one of which is the voltage rise problem. This happens when generation exceeds demand thereby causing reverse power flow and consequently leading to overvoltage. A number of methods have been discussed in the literature to overcome this challenge ranging from network augmentation to active management of the distribution networks. This paper discusses the issue of voltage rise problem and its impact on distribution networks with high amounts of distributed energy resources (DERs). It presents different DG technologies such as those based on conventional and unconventional resources and other DERs such as battery storage systems and fuel cells. The study provides a comprehensive overview of approaches employed to curtail the issue of voltage increase at the point of common coupling (PCC), which includes strategies based on the network reinforcement methodology and the active distribution network management. A techno-economic comparison is then introduced in the paper to ascertain the similarities and dissimilarities of different mitigation approaches based on the technology involved, ease of deployment, cost implication, and their pros and cons. The paper provides insights into directions for future research in mitigating the impact of voltage rise presented by grid-connected DGs without limiting their increased penetration in the existing power grid