Efficient Implementation on Low-Cost SoC-FPGAs of TLSv1.2 Protocol with ECC_AES Support for Secure IoT Coordinators

Security management for IoT applications is a critical research field, especially when taking into account the performance variation over the very different IoT devices. In this paper, we present high-performance client/server coordinators on low-cost SoC-FPGA devices for secure IoT data collection. Security is ensured by using the Transport Layer Security (TLS) protocol based on the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite. The hardware architecture of the proposed coordinators is based on SW/HW co-design, implementing within the hardware accelerator core Elliptic Curve Scalar Multiplication (ECSM), which is the core operation of Elliptic Curve Cryptosystems (ECC). Meanwhile, the control of the overall TLS scheme is performed in software by an ARM Cortex-A9 microprocessor. In fact, the implementation of the ECC accelerator core around an ARM microprocessor allows not only the improvement of ECSM execution but also the performance enhancement of the overall cryptosystem. The integration of the ARM processor enables to exploit the possibility of embedded Linux features for high system flexibility. As a result, the proposed ECC accelerator requires limited area, with only 3395 LUTs on the Zynq device used to perform high-speed, 233-bit ECSMs in 413 µs, with a 50 MHz clock. Moreover, the generation of a 384-bit TLS handshake secret key between client and server coordinators requires 67.5 ms on a low cost Zynq 7Z007S device

A versatile Montgomery multiplier architecture with characteristic three support

We present a novel unified core design which is extended to realize Montgomery multiplication in the fields GF(2n), GF(3m), and GF(p). Our unified design supports RSA and elliptic curve schemes, as well as the identity-based encryption which requires a pairing computation on an elliptic curve. The architecture is pipelined and is highly scalable. The unified core utilizes the redundant signed digit representation to reduce the critical path delay. While the carry-save representation used in classical unified architectures is only good for addition and multiplication operations, the redundant signed digit representation also facilitates efficient computation of comparison and subtraction operations besides addition and multiplication. Thus, there is no need for a transformation between the redundant and the non-redundant representations of field elements, which would be required in the classical unified architectures to realize the subtraction and comparison operations. We also quantify the benefits of the unified architectures in terms of area and critical path delay. We provide detailed implementation results. The metric shows that the new unified architecture provides an improvement over a hypothetical non-unified architecture of at least 24.88%, while the improvement over a classical unified architecture is at least 32.07%

A survey of hardware implementations of elliptic curve cryptographic systems

Elliptic Curve Cryptography (ECC) has gained much recognition over the last decades and has established itself among the well known public-key cryptography schemes, not least due its smaller key size and relatively lower computational effort compared to RSA. The wide employment of Elliptic Curve Cryptography in many different application areas has been leading to a variety of implementation types and domains ranging from pure software approaches over hardware implemenations to hardware/software co-designs. The following review provides an overview of state of the art hardware implemenations of ECC, specifically in regard to their targeted design goals. In this context the suitability of the hardware/software approach in regard to the security challenges opposed by the low-end embedded devices of the Internet of Things is briefly examined. The paper also outlines ECC’s vulnerability against quantum attacks and references one possible solution to that problem

Hardware Implementations of Scalable and Unified Elliptic Curve Cryptosystem Processors

As the amount of information exchanged through the network grows, so does the demand for increased security over the transmission of this information. As the growth of computers increased in the past few decades, more sophisticated methods of cryptography have been developed. One method of transmitting data securely over the network is by using symmetric-key cryptography. However, a drawback of symmetric-key cryptography is the need to exchange the shared key securely. One of the solutions is to use public-key cryptography. One of the modern public-key cryptography algorithms is called Elliptic Curve Cryptography (ECC). The advantage of ECC over some older algorithms is the smaller number of key sizes to provide a similar level of security. As a result, implementations of ECC are much faster and consume fewer resources. In order to achieve better performance, ECC operations are often offloaded onto hardware to alleviate the workload from the servers' processors. The most important and complex operation in ECC schemes is the elliptic curve point multiplication (ECPM). This thesis explores the implementation of hardware accelerators that offload the ECPM operation to hardware. These processors are referred to as ECC processors, or simply ECPs. This thesis targets the efficient hardware implementation of ECPs specifically for the 15 elliptic curves recommended by the National Institute of Standards and Technology (NIST). The main contribution of this thesis is the implementation of highly efficient hardware for scalable and unified finite field arithmetic units that are used in the design of ECPs. In this thesis, scalability refers to the processor's ability to support multiple key sizes without the need to reconfigure the hardware. By doing so, the hardware does not need to be redesigned for the server to handle different levels of security. Unified refers to the ability of the ECP to handle both prime and binary fields. The resultant designs are valuable to the research community and industry, as a single hardware device is able to handle a wide range of ECC operations efficiently and at high speeds. Thus, improving the ability of network servers to handle secure transaction more quickly and improve productivity at lower costs

Reconfigurable elliptic curve cryptography

Elliptic Curve Cryptosystems (ECC) have been proposed as an alternative to other established public key cryptosystems such as RSA (Rivest Shamir Adleman). ECC provide more security per bit than other known public key schemes based on the discrete logarithm problem. Smaller key sizes result in faster computations, lower power consumption and memory and bandwidth savings, thus making ECC a fast, flexible and cost-effective solution for providing security in constrained environments. Implementing ECC on reconfigurable platform combines the speed, security and concurrency of hardware along with the flexibility of the software approach. This work proposes a generic architecture for elliptic curve cryptosystem on a Field Programmable Gate Array (FPGA) that performs an elliptic curve scalar multiplication in 1.16milliseconds for GF (2163), which is considerably faster than most other documented implementations. One of the benefits of the proposed processor architecture is that it is easily reprogrammable to use different algorithms and is adaptable to any field order. Also through reconfiguration the arithmetic unit can be optimized for different area/speed requirements. The mathematics involved uses binary extension field of the form GF (2n) as the underlying field and polynomial basis for the representation of the elements in the field. A significant gain in performance is obtained by using projective coordinates for the points on the curve during the computation process

Realizing arbitrary-precision modular multiplication with a fixed-precision multiplier datapath

Within the context of cryptographic hardware, the term scalability refers to the ability to process operands of any size, regardless of the precision of the underlying data path or registers. In this paper we present a simple yet effective technique for increasing the scalability of a fixed-precision Montgomery multiplier. Our idea is to extend the datapath of a Montgomery multiplier in such a way that it can also perform an ordinary multiplication of two n-bit operands (without modular reduction), yielding a 2n-bit result. This conventional (nxn->2n)-bit multiplication is then used as a “sub-routine” to realize arbitrary-precision Montgomery multiplication according to standard software algorithms such as Coarsely Integrated Operand Scanning (CIOS). We show that performing a 2n-bit modular multiplication on an n-bit multiplier can be done in 5n clock cycles, whereby we assume that the n-bit modular multiplication takes n cycles. Extending a Montgomery multiplier for this extra functionality requires just some minor modifications of the datapath and entails a slight increase in silicon area

Customisable arithmetic hardware designs

Imperial Users onl

A Flexible Crypto-system Based upon the REDEFINE Polymorphic ASIC Architecture

The highest levels of security can be achieved through the use of more than one type of cryptographic algorithm for each security function. In this paper, the REDEFINE polymorphic architecture is presented as an architecture framework that can optimally support a varied set of crypto algorithms without losing high performance. The presented solution is capable of accelerating the advanced encryption standard (AES) and elliptic curve cryptography (ECC) cryptographic protocols, while still supporting different flavors of these algorithms as well as different underlying finite field sizes. The compelling feature of this cryptosystem is the ability to provide acceleration support for new field sizes as well as new (possibly proprietary) cryptographic algorithms decided upon after the cryptosystem is deployed.Defence Science Journal, 2012, 62(1), pp.25-31, DOI:http://dx.doi.org/10.14429/dsj.62.143

Comparison of Scalable Montgomery Modular Multiplication Implementations Embedded in Reconfigurable Hardware

International audienceThis paper presents a comparison of possible approaches for an efficient implementation of Multiple-word radix-2 Montgomery Modular Multiplication (MM) on modern Field Programmable Gate Arrays (FPGAs). The hardware implementation of MM coprocessor is fully scalable what means that it can be reused in order to generate long-precision results independently on the word length of the originally proposed coprocessor. The first of analyzed implementations uses a data path based on traditionally used redundant carry-save adders, the second one exploits, in scalable designs not yet applied, standard carry-propagate adders with fast carry chain logic. As a control unit and a platform for purely software implementation an embedded soft-core processor Altera NIOS is employed. All implementations use large embedded memory blocks available in recent FPGAs. Speed and logic requirements comparisons are performed on the optimized software and combined hardware-software designs in Altera FPGAs. The issues of targeting a design specifically for a FPGA are considered taking into account the underlying architecture imposed by the target FPGA technology. It is shown that the coprocessors based on carry-save adders and carry-propagate adders provide comparable results in constrained FPGA implementations but in case of carry-propagate logic, the solution requires less embedded memory and provides some additional implementation advantages presented in the paper

Reconfigurable Architecture for Elliptic Curve Cryptography Using FPGA

The high performance of an elliptic curve (EC) crypto system depends efficiently on the arithmetic in the underlying finite field. We have to propose and compare three levels of Galois Field , , and . The proposed architecture is based on Lopez-Dahab elliptic curve point multiplication algorithm, which uses Gaussian normal basis for field arithmetic. The proposed is based on an efficient Montgomery add and double algorithm, also the Karatsuba-Ofman multiplier and Itoh-Tsujii algorithm are used as the inverse component. The hardware design is based on optimized finite state machine (FSM), with a single cycle 193 bits multiplier, field adder, and field squarer. The another proposed architecture is based on applications for which compactness is more important than speed. The FPGA’s dedicated multipliers and carry-chain logic are used to obtain the small data path. The different optimization at the hardware level improves the acceleration of the ECC scalar multiplication, increases frequency and the speed of operation such as key generation, encryption, and decryption. Finally, we have to implement our design using Xilinx XC4VLX200 FPGA device