Model based control strategies for a class of nonlinear mechanical sub-systems

This paper presents a comparison between various control strategies for a class of mechanical actuators common in heavy-duty industry. Typical actuator components are hydraulic or pneumatic elements with static non-linearities, which are commonly referred to as Hammerstein systems. Such static non-linearities may vary in time as a function of the load and hence classical inverse-model based control strategies may deliver sub-optimal performance. This paper investigates the ability of advanced model based control strategies to satisfy a tolerance interval for position error values, overshoot and settling time specifications. Due to the presence of static non-linearity requiring changing direction of movement, control effort is also evaluated in terms of zero crossing frequency (up-down or left-right movement). Simulation and experimental data from a lab setup suggest that sliding mode control is able to improve global performance parameters

NONLINEAR IDENTIFICATION AND CONTROL: A PRACTICAL SOLUTION AND ITS APPLICATION

It is well known that typical welding processes such as laser welding are nonlinear although mostly they are treated as linear system. For the purpose of automatic control, Identification of nonlinear system, especially welding processes is a necessary and fundamental problem. The purpose of this research is to develop a simple and practical identification and control for welding processes. Many investigations have shown the possibility to represent physical processes by nonlinear models, such as Hammerstein structure, consisting of a nonlinearity and linear dynamics in series with each other. Motivated by the fact that typical welding processes do not have non-zeroes, a novel two-step nonlinear Hammerstein identification method is proposed for laser welding processes. The method can be realized both in continuous and discrete case. To study the relation among parameters influencing laser processing, a standard diode laser processing system is built as system prototype. Based on experimental study, a SISO and 2ISO nonlinear Hammerstein model structure are developed to approximate the diode laser welding process. Specific persistent excitation signals such as PRTS (Pseudo-random-ternary-series) to Step signal are used for identification. The model takes welding speed as input and the top surface molten weld pool width as output. A vision based sensor implemented with a Pulse-controlled-CCD camera is proposed and applied to acquire the images and the geometric data of the weld pool. The estimated model is then verified by comparing the simulation and experimental measurement. The verification shows that the model is reasonably correct and can be use to model the nonlinear process for further study. The two-step nonlinear identification method is proved valid and applicable to traditional welding processes and similar manufacturing processes. Based on the identified model, nonlinear control algorithms are also studied. Algorithms include simple linearization and backstepping based robust adaptive control algorithm are proposed and simulated

Adaptive kernel canonical correlation analysis algorithms for nonparametric identification of Wiener and Hammerstein systems

This paper treats the identification of nonlinear systems that consist of a cascade of a linear channel and a nonlinearity, such as the well-known Wiener and Hammerstein systems. In particular, we follow a supervised identification approach that simultaneously identifies both parts of the nonlinear system. Given the correct restrictions on the identification problem, we show how kernel canonical correlation analysis (KCCA) emerges as the logical solution to this problem.We then extend the proposed identification algorithm to an adaptive version allowing to deal with time-varying systems. In order to avoid overfitting problems, we discuss and compare three possible regularization techniques for both the batch and the adaptive versions of the proposed algorithm. Simulations are included to demonstrate the effectiveness of the presented algorithm

A Robust Variable Step Size Fractional Least Mean Square (RVSS-FLMS) Algorithm

In this paper, we propose an adaptive framework for the variable step size of the fractional least mean square (FLMS) algorithm. The proposed algorithm named the robust variable step size-FLMS (RVSS-FLMS), dynamically updates the step size of the FLMS to achieve high convergence rate with low steady state error. For the evaluation purpose, the problem of system identification is considered. The experiments clearly show that the proposed approach achieves better convergence rate compared to the FLMS and adaptive step-size modified FLMS (AMFLMS).Comment: 15 pages, 3 figures, 13th IEEE Colloquium on Signal Processing & its Applications (CSPA 2017

Multiple lookup table predistortion for adaptive modulation

This paper presents a multiple LUT digital adaptive predistorter based on a Hammerstein model that uses the return channel to feed back information from the receiver, concretely the bit error rate (BER), in order to train and later adapt the specific LUT gains that permit always operating at the best back-off level. This new predistorter architecture is aimed at coping with modern communication standards that use adaptive modulation (such as IEEE 802.11 or IEEE 802.16) and therefore continuously searching the best linear amplification to maximize power efficiency at the time that a certain quality of service (BER) in reception is guaranteed. Simulations provided will show the advantages of this multi-LUT configuration, where in front of different channel conditions, linear and efficient amplification (minimum back-off) is achieved at the time that a certain level of BER at reception is ensured. Index terms – Lookup tables (LUT), digital adaptive predistortion, Hammerstein models, adaptive modulation systems, peak to average power ratio (PAPR), bit error rate (BER).Peer Reviewe

Networked Control System Design and Parameter Estimation

Networked control systems (NCSs) are a kind of distributed control systems in which the data between control components are exchanged via communication networks. Because of the attractive advantages of NCSs such as reduced system wiring, low weight, and ease of system diagnosis and maintenance, the research on NCSs has received much attention in recent years. The first part (Chapter 2 - Chapter 4) of the thesis is devoted to designing new controllers for NCSs by incorporating the network-induced delays. The thesis also conducts research on filtering of multirate systems and identification of Hammerstein systems in the second part (Chapter 5 - Chapter 6). Network-induced delays exist in both sensor-to-controller (S-C) and controller-to-actuator (C-A) links. A novel two-mode-dependent control scheme is proposed, in which the to-be-designed controller depends on both S-C and C-A delays. The resulting closed-loop system is a special jump linear system. Then, the conditions for stochastic stability are obtained in terms of a set of linear matrix inequalities (LMIs) with nonconvex constraints, which can be efficiently solved by a sequential LMI optimization algorithm. Further, the control synthesis problem for the NCSs is considered. The definitions of H₂ and H∞ norms for the special system are first proposed. Also, the plant uncertainties are considered in the design. Finally, the robust mixed H₂/H∞ control problem is solved under the framework of LMIs. To compensate for both S-C and C-A delays modeled by Markov chains, the generalized predictive control method is modified to choose certain predicted future control signal as the current control effort on the actuator node, whenever the control signal is delayed. Further, stability criteria in terms of LMIs are provided to check the system stability. The proposed method is also tested on an experimental hydraulic position control system. Multirate systems exist in many practical applications where different sampling rates co-exist in the same system. The l₂-l∞ filtering problem for multirate systems is considered in the thesis. By using the lifting technique, the system is first transformed to a linear time-invariant one, and then the filter design is formulated as an optimization problem which can be solved by using LMI techniques. Hammerstein model consists of a static nonlinear block followed in series by a linear dynamic system, which can find many applications in different areas. New switching sequences to handle the two-segment nonlinearities are proposed in this thesis. This leads to less parameters to be estimated and thus reduces the computational cost. Further, a stochastic gradient algorithm based on the idea of replacing the unmeasurable terms with their estimates is developed to identify the Hammerstein model with two-segment nonlinearities. Finally, several open problems are listed as the future research directions

Feedback control of unsupported standing in paraplegia. Part I: optimal control approach

This is the first of a pair of papers which describe an investigation into the feasibility of providing artificial balance to paraplegics using electrical stimulation of the paralyzed muscles. By bracing the body above the shanks, only stimulation of the plantarflexors is necessary. This arrangement prevents any influence from the intact neuromuscular system above the spinal cord lesion. Here, the authors extend the design of the controllers to a nested-loop LQG (linear quadratic Gaussian) stimulation controller which has ankle moment feedback (inner loops) and inverted pendulum angle feedback (outer loop). Each control loop is tuned by two parameters, the control weighting and an observer rise-time, which together determine the behavior. The nested structure was chosen because it is robust, despite changes in the muscle properties (fatigue) and interference from spasticity