9,068 research outputs found
Application of remote sensing to hydrology
Streamflow forecasting and hydrologic modelling are considered in a feasibility assessment of using the data produced by remote observation from space and/or aircraft to reduce the time and expense normally involved in achieving the ability to predict the hydrological behavior of an ungaged watershed. Existing watershed models are described, and both stochastic and parametric techniques are discussed towards the selection of a suitable simulation model. Technical progress and applications are reported and recommendations are made for additional research
Recommended from our members
Hydrologic evaluation of satellite precipitation products over a mid-size basin
Since the past three decades a great deal of effort is devoted to development of satellite-based precipitation retrieval algorithms. More recently, several satellite-based precipitation products have emerged that provide uninterrupted precipitation time series with quasi-global coverage. These satellite-based precipitation products provide an unprecedented opportunity for hydrometeorological applications and climate studies. Although growing, the application of satellite data for hydrological applications is still very limited. In this study, the effectiveness of using satellite-based precipitation products for streamflow simulation at catchment scale is evaluated. Five satellite-based precipitation products (TMPA-RT, TMPA-V6, CMORPH, PERSIANN, and PERSIANN-adj) are used as forcing data for streamflow simulations at 6-h and monthly time scales during the period of 2003-2008. SACramento Soil Moisture Accounting (SAC-SMA) model is used for streamflow simulation over the mid-size Illinois River basin.The results show that by employing the satellite-based precipitation forcing the general streamflow pattern is well captured at both 6-h and monthly time scales. However, satellites products, with no bias-adjustment being employed, significantly overestimate both precipitation inputs and simulated streamflows over warm months (spring and summer months). For cold season, on the other hand, the unadjusted precipitation products result in under-estimation of streamflow forecast. It was found that bias-adjustment of precipitation is critical and can yield to substantial improvement in capturing both streamflow pattern and magnitude. The results suggest that along with efforts to improve satellite-based precipitation estimation techniques, it is important to develop more effective near real-time precipitation bias adjustment techniques for hydrologic applications. © 2010 Elsevier B.V
AOIPS water resources data management system
A geocoded data management system applicable for hydrological applications was designed to demonstrate the utility of the Atmospheric and Oceanographic Information Processing System (AOIPS) for hydrological applications. Within that context, the geocoded hydrology data management system was designed to take advantage of the interactive capability of the AOIPS hardware. Portions of the Water Resource Data Management System which best demonstrate the interactive nature of the hydrology data management system were implemented on the AOIPS. A hydrological case study was prepared using all data supplied for the Bear River watershed located in northwest Utah, southeast Idaho, and western Wyoming
Aggregation of ecological indicators for mapping aquatic nature quality : overview of existing methods and case studies
Indicators for aquatic nature quality are calculated using ecological monitoring data from individual sampling stations. For reporting purposes, these results need to be aggregated and scaled up to higher levels (catchment area, country). This report provides an overview of different existing spatial aggregation methods for this purpose, including an evaluation of their suitability for aquatic ecological indicators. So-called „model-based„ methods, consisting of some sort of „kriging¿ step followed by calculation of the arithmetic mean, appeared to be the most appropriate. Application of these methods to multimetric indicators of aquatic macroinvertebrates in two Dutch subcatchment areas confirmed their suitability. However, the methods that were used were based on aggregation (using kriging) over Euclidian (straight), distances. It is recommended to conduct further research on the suitability of interpolation through stream networks, i.e., through the waterways themselves
Recommended from our members
Investigating the impact of remotely sensed precipitation and hydrologic model uncertainties on the ensemble streamflow forecasting
In the past few years sequential data assimilation (SDA) methods have emerged as the best possible method at hand to properly treat all sources of error in hydrological modeling. However, very few studies have actually implemented SDA methods using realistic input error models for precipitation. In this study we use particle filtering as a SDA method to propagate input errors through a conceptual hydrologic model and quantify the state, parameter and streamflow uncertainties. Recent progress in satellite-based precipitation observation techniques offers an attractive option for considering spatiotemporal variation of precipitation. Therefore, we use the PERSIANN-CCS precipitation product to propagate input errors through our hydrologic model. Some uncertainty scenarios are set up to incorporate and investigate the impact of the individual uncertainty sources from precipitation, parameters and also combined error sources on the hydrologic response. Also probabilistic measure are used to quantify the quality of ensemble prediction. Copyright 2006 by the American Geophysical Union
A Detailed Hydro-Economic Model for Assessing the Effects of Surface Water and Groundwater Policies: A Demonstration Model from Brazil
Policymakers, managers of water use associations, and many others in developing countries are considering policy actions that will directly or indirectly change the costs and availability of groundwater and surface water for agricultural users. While in many cases such actions may bring about welcomed increases in water use efficiency, little is known about the likely effects of changes in irrigation costs or water access on farmer behavior, or on farmer incomes in the short or long runs, and virtually nothing is known about the detailed immediate or knock-on effects on water resources that such policy actions might cause. This paper reports the preliminary results of research aiming to fill these large scientific gaps by developing a detailed hydrologic model and a detailed economic model of agriculture in the context of the Buriti Vermelho (BV) sub-catchment area of the São Francisco River Basin in Brazil. A spatially explicit, farm-level, positive mathematical programming model capable of accommodating a broad array of farm sizes and farm/farmer characteristics is being developed to predict the effects of alternative water policies and neighbors water use patterns on agricultural production. Special attention is given to precisely defining and estimating the distinct variable costs (including labor and electrical energy costs) and capital costs of surface water and groundwater, which are considered perfect substitutes for irrigation. Shadow values for non-marketed inputs (land, family labor, and water) are estimated in the first step of the modeling process. A high-resolution, spatially distributed hydrologic model (MOD-HMS) is being developed to simulate three-dimensional, variably-saturated subsurface flow and solute transport. Subsurface flow is simulated using the three-dimensional Richards equation while accounting for a) application of water at the surface, b) precipitation, c) soil evaporation and crop transpiration, and d) agricultural pumping. Demonstration versions of both models are presented and tested: the economic model assesses the effects of increasing water scarcity on cultivated area, crop mix, input mix and farm profits; the hydrologic model uses two irrigation water use scenarios to demonstrate the effects of each on surface water flows and storage, and on groundwater storage and well depth. The models are not currently linked, but a detailed plan to do so is presented and discussed. The paper concludes by discussing next steps in research and policy simulations.Resource /Energy Economics and Policy,
Recommendations for improving integration in national end-to-end flood forecasting systems: an overview of the FFIR (flooding from intense rainfall) programme
Recent surface-water and flash floods have caused millions of pounds worth of damage in the UK. These events form rapidly and are difficult to predict due to their short-lived and localised nature. The interdisciplinary Flooding From Intense Rainfall (FFIR) programme investigated the feasibility of enhancing the integration of an end-to-end forecasting system for flash and surface-water floods to help increase the lead time for warnings for these events. Here we propose developments to the integration of an operational end-to-end forecasting system based on the findings of the FFIR programme. The suggested developments include methods to improve radar-derived rainfall rates and understanding of the uncertainty in the position of intense rainfall in weather forecasts; the addition of hydraulic modelling components; and novel education techniques to help lead to effective dissemination of flood warnings. We make recommendations for future advances such as research into the propagation of uncertainty throughout the forecast chain. We further propose the creation of closer bonds to the end users to allow for an improved, integrated, end-to-end forecasting system that is easily accessible for users and end users alike, and will ultimately help mitigate the impacts of flooding from intense rainfall by informed and timely action
Bringing the OpenMI to LIFE Progress Report No. 4 - 31st March 2008 – 30th September 2008
The Water Framework Directive demands an integrated approach to water management. This requires the ability to predict how catchment processes will behave and interact in response to the activities of water managers and others. In most contexts, it is not feasible to build a single predictive model that adequately represents all the processes; therefore a means of linking models of individual processes is required. This is met by the FP5 HarmonIT project’s Open Modelling Interface and Environment (the OpenMI). The purpose of this project is to transform the OpenMI from a research output to a sustainable operational Standard. It will build the capacity to use the OpenMI and will demonstrate it under operational conditions. It will also develop, test and demonstrate the future support organisation for the OpenMI. Finally, information about the OpenMI will be disseminated to users
- …