719 research outputs found
A Reconfigurable Impedance Matching Network Employing RF-MEMS Switches
We propose the design of a reconfigurable impedance matching network for the
lower RF frequency band, based on a developed RF-MEMS technology. The circuit
is composed of RF-MEMS ohmic relays, metal-insulator-metal (MIM) capacitors and
suspended spiral inductors, all integrated on a high resistivity Silicon
substrate. The presented circuit is well-suited for all applications requiring
adaptive impedance matching between two in principle unknown cascaded
RF-circuits. The fabrication and testing of a monolithic integrated prototype
in RF-MEMS technology from ITC-irst is currently underway.Comment: Submitted on behalf of EDA Publishing Association
(http://irevues.inist.fr/EDA-Publishing
Reconfigurable Impedance Matching Networks Based on RF-MEMS and CMOS-MEMS Technologies
Reconfigurable impedance matching networks are an integral part of multiband radio-frequency (RF) transceivers. They are used to compensate for the input/output impedance variations between the different blocks caused by switching the frequency band of operation or by adjusting the output power level. Various tuning techniques have been developed to construct tunable impedance matching networks employing solid-state p-i-n diodes and varactors. At millimeter-wave frequencies, the increased loss due to the low quality factor of the solid-state devices becomes an important issue. Another drawback of the solid-state tuning elements is the increased nonlinearity and noise at higher RF power levels.
The objective of the research described in this thesis is to investigate the feasibility of using RF microelectromechanical systems (RF-MEMS) technology to develop reconfigurable impedance matching networks. Different types of tunable impedance matching networks with improved impedance tuning range, power handling capability, and lower insertion loss have been developed. Another objective is to investigate the realization of a fully integrated one-chip solution by integrating MEMS devices in standard processes used for RF integrated circuits (RFICs).
A new CMOS-MEMS post-processing technique has been developed that allows the integration of tunable RF MEMS devices with vertical actuation within a CMOS chip. Various types of CMOS-MEMS components used as tuning elements in reconfigurable RF transceivers have been developed. These include tunable parallel-plate capacitors that outperform the available CMOS solid-state varactors in terms of quality factor and linearity. A tunable microwave band-pass filter has been demonstrated by employing the proposed RF MEMS tunable capacitors. For the first time, CMOS-MEMS capacitive type switches for microwave and millimeter-wave applications have been developed using TSMC 0.35-µm CMOS process employing the proposed CMOS-MEMS integration technique. The switch demonstrates an excellent RF performance from 10-20 GHz.
Novel MEMS-based reconfigurable impedance matching networks integrated in standard CMOS technologies are also presented. An 8-bit reconfigurable impedance matching network based on the distributed MEMS transmission line (DMTL) concept operating at 13-24 GHz is presented. The network is implemented using standard
0.35-µm CMOS technology and employs a novel suspended slow-wave structure on
a silicon substrate. To our knowledge, this is the first implementation of a DMTL tunable MEMS
impedance matching network using a standard CMOS technology. A reconfigurable
amplifier chip for WLAN applications operating at 5.2 GHz is also designed and implemented. The amplifier achieves maximum power gain under variable load and
source impedance conditions by using the integrated RF-MEMS impedance
matching networks. This is the first single-chip implementation of
a reconfigurable amplifier using high-Q MEMS impedance matching networks.
The monolithic CMOS implementation of the proposed RF MEMS impedance matching networks enables the development of future low-cost single-chip RF multiband transceivers with improved performance and functionality
Reconfigurable Reflectarrays and Array Lenses for Dynamic Antenna Beam Control: A Review
Advances in reflectarrays and array lenses with electronic beam-forming
capabilities are enabling a host of new possibilities for these
high-performance, low-cost antenna architectures. This paper reviews enabling
technologies and topologies of reconfigurable reflectarray and array lens
designs, and surveys a range of experimental implementations and achievements
that have been made in this area in recent years. The paper describes the
fundamental design approaches employed in realizing reconfigurable designs, and
explores advanced capabilities of these nascent architectures, such as
multi-band operation, polarization manipulation, frequency agility, and
amplification. Finally, the paper concludes by discussing future challenges and
possibilities for these antennas.Comment: 16 pages, 12 figure
Reconfigurable RF Front End Components for Multi-Radio Platform Applications
The multi-service requirements of the 3G and 4G communication systems, and their backward compatibility requirements, create challenges for the antenna and RF front-end designs with multi-band and wide-band techniques. These challenges include: multiple filters, which are lossy, bulky, and expensive, are needed in the system; device board size limitation and the associated isolation problems caused by the limited space and crowd circuits; and the insertion loss issues created by the single-pole-multi-through antenna switch.
As will be shown, reconfigurable antennas can perform portions of the filter functions, which can help solve the multiple filters problem. Additionally, reconfigurable RF circuits can decrease the circuit size and output ports, which can help solve board size limitation, and isolation and antenna switch insertion loss issues.
To validate the idea that reconfigurable antennas and reconfigurable RF circuits are a viable option for multi-service communication system, a reconfigurable patch antenna, a reconfigurable monopole antenna, and a reconfigurable power amplifier (PA) have been developed. All designs adapt state-of-the-art techniques.
For the reconfigurable antenna designs, an experiment demonstrating its advantages, such as jamming signal resistance, has been performed. Reconfigurable antennas provide a better out-ofoperating- band noise performance than the multi-band antennas design, decreasing the need for filters in the system. A full investigation of reconfigurable antennas, including the single service reconfigurable antenna, the mixed signal service reconfigurable antenna, and the multi-band reconfigurable antenna, has been completed. The design challenges, which include switches investigation, switches integration, and service grouping techniques, have been discussed.
In the reconfigurable PA portion, a reconfigurable PA structure has first been demonstrated, and includes a reconfigurable output matching network (MN) and a reconfigurable die design. To validate the proposed reconfigurable PA structure, a reconfigurable PA for a 3G cell phone system has been designed with a multi-chip module technique. The reconfigurable PA structure can significantly decrease the real-estate, cost, and complexity of the PA design. Further, by decreasing the number of output ports, the number of poles for the antenna switch will be decreased as well, leading to an insertion loss decrease
RECONFIGURABLE POWER AMPLIFIER WITH TUNABLE INTERSTAGE MATCHING NETWORK USING GaAs MMIC AND SURFACE-MOUNT TECHNOLOGY
As the demand of reconfigurable devices increases, the possibility of
exploiting the interstage matching network in a two-stage amplifier to provide center
frequency tuning capability is explored. While placement of tuning elements at the
input and/or output matching network has some disadvantages, placement of tuning
elements in the interstage absorbs the lossy components characteristics into useful
attributes. The circuit design methodology includes graphical method to determine
the bandpass topology that achieves high Q-contour on the Smith chart thus result in
narrow bandwidth. T-section and π-section topologies are used to match reactive
terminations provided by the first and second amplifier stages. The design
methodology also includes utilization of interstage mismatch loss that decreases as
increasing frequency to compensate for amplifier gain roll-off and equalize the gain
at different tuning states.
In prototype realization, three design configurations are discussed in this
thesis: 1) a discrete design for operation between 0.1 – 0.9 GHz with the total layout
area of 7.5 mm x 12.5 mm, 2) a partial monolithic design (Quasi-MMIC) for
operation between 0.9 – 2.4 GHz that is 25 times smaller layout area compared to the
discrete design, and 3) a conceptual design of integrated monolithic reconfigurable
PA for operation between 0.9 – 2.4 GHz that is 130 times smaller layout area
compared to the discrete design. One variant of the fabricated reconfigurable PA
offers advantage of 4-states center frequency tuning from 1.37 GHz to 1.95 GHz
with gain of 21.5 dB (+ 0.7 dB).
The feasibility of interstage matching network as tuning elements in
reconfigurable power amplifier has been explored. The input and output matching
networks are fixed while the interstage impedances are varied using electronic
switching (discrete SP4T and GaAs FET switches). The discrete design is suited for
the operation at low frequency (fo < 1GHz), while monolithic implementation of the
tunable interstage matching network is required for higher frequency operation due
to size limitation and parasitic effects. The reconfigurable PA using MMIC tuner was
designed at higher frequency to possibly cover GSM, CDMA, Bluetooth, and
WiMAX frequency (0.9 – 2.4 GHz)
A Compact Semi-Lumped Tunable Complex Impedance Transformer
International audienceThis article describes the design and performance of a compact tunable impedance transformer. The structure is based on a transmission line loaded by varactor diodes. Using only two pairs of diodes, the circuit is very small with a total length of only λ/10. Both the frequency range and the load impedance can be tuned by varying the varactor bias voltages. Our design provides a tunable operating frequency range of ± 40% and an impedance match ranging from 20 Ω to 90 Ω at 0.8 GHz and from 30 Ω to 170 Ω at 1.5 GHz. In addition, a new approach that considers losses for the simulation and measurement of this impedance transformer was investigated. The measured performance of a 1 GHz prototype design confirmed the validity of this new approach
Reconfigurable Antennas
In this new book, we present a collection of the advanced developments in reconfigurable antennas and metasurfaces. It begins with a review of reconfigurability technologies, and proceeds to the presentation of a series of reconfigurable antennas, UWB MIMO antennas and reconfigurable arrays. Then, reconfigurable metasurfaces are introduced and the latest advances are presented and discussed
Reconfigurable and multi-functional antennas
This thesis describes a research into multi-frequency and filtering antennas. Several novel antennas are presented, each of which addresses a specific issue for future communication systems, in terms of multi-frequency operation, and filtering capability. These antennas seem to be good candidates for implementation in future multiband radios, cognitive radio (CR), and software defined radio (SDR). The filtering antenna provides an additional filtering action which greatly improves the noise performance and reduces the need for filtering circuitry in the RF front end.
Two types of frequency reconfigurable antennas are presented. One is tunable left-handed loop over ground plane and the second is slot-fed reconfigurable patch. The operating frequency of the left handed loop is reconfigured by loading varactor diodes whilst the frequency agility in the patch is achieved by inserting switches in the coupling slot. The length of the slot is altered by activating the switches.
Compact microstrip antennas with filtering capabilities are presented in this thesis. Two filtering antennas are presented. Whilst the first one consists of three edge-coupled patches, the second filtering antenna consists of rectangular patch coupled to two hairpin resonators. The proposed antennas combine radiating and filtering functions by providing good out of band gain suppression
Recommended from our members
Design of Radiation Pattern-Reconfigurable 60-GHz Antenna for 5G Applications
noReconfigurable beam steering using circular disc microstrip patch antenna with a ring slotis proposed. The overall dimension of the antenna is 5.4Ă—5.4 mm2
printed on a 0.504 mm thick, Rogers RT5870 substrate with relative permittivity 2.3 and loss tangent 0.0012. The designed antenna operates at the expected 5G frequency band 60 GHz with a central coaxial probe feed. TwoNMOS switches are configured to generate three different beam patterns. Activating each switch individually results in a near 70 degree
shift in the main beam direction, whereas the frequency characteristics are unchanged. The power gains are between 3.9 dB and 4.8dB for the three states of switches configurations. Simulated results in terms of return loss, peak gains and radiation pattern are presented and show a reasonable agreement at the expected 60 GHz bandfor 5G applications.The published journal webpage is no longer available
- …