Integrating NVIDIA Deep Learning Accelerator (NVDLA) with RISC-V SoC on FireSim

NVDLA is an open-source deep neural network (DNN) accelerator which has received a lot of attention by the community since its introduction by Nvidia. It is a full-featured hardware IP and can serve as a good reference for conducting research and development of SoCs with integrated accelerators. However, an expensive FPGA board is required to do experiments with this IP in a real SoC. Moreover, since NVDLA is clocked at a lower frequency on an FPGA, it would be hard to do accurate performance analysis with such a setup. To overcome these limitations, we integrate NVDLA into a real RISC-V SoC on the Amazon cloud FPGA using FireSim, a cycle-exact FPGA-accelerated simulator. We then evaluate the performance of NVDLA by running YOLOv3 object-detection algorithm. Our results show that NVDLA can sustain 7.5 fps when running YOLOv3. We further analyze the performance by showing that sharing the last-level cache with NVDLA can result in up to 1.56x speedup. We then identify that sharing the memory system with the accelerator can result in unpredictable execution time for the real-time tasks running on this platform. We believe this is an important issue that must be addressed in order for on-chip DNN accelerators to be incorporated in real-time embedded systems.Comment: Presented at the 2nd Workshop on Energy Efficient Machine Learning and Cognitive Computing for Embedded Applications (EMC2'19

A Scalable and Adaptive Network on Chip for Many-Core Architectures

In this work, a scalable network on chip (NoC) for future many-core architectures is proposed and investigated. It supports different QoS mechanisms to ensure predictable communication. Self-optimization is introduced to adapt the energy footprint and the performance of the network to the communication requirements. A fault tolerance concept allows to deal with permanent errors. Moreover, a template-based automated evaluation and design methodology and a synthesis flow for NoCs is introduced

An Efficient NoC-based Framework To Improve Dataflow Thread Management At Runtime

This doctoral thesis focuses on how the application threads that are based on dataflow execution model can be managed at Network-on-Chip (NoC) level. The roots of the dataflow execution model date back to the early 1970’s. Applications adhering to such program execution model follow a simple producer-consumer communication scheme for synchronising parallel thread related activities. In dataflow execution environment, a thread can run if and only if all its required inputs are available. Applications running on a large and complex computing environment can significantly benefit from the adoption of dataflow model. In the first part of the thesis, the work is focused on the thread distribution mechanism. It has been shown that how a scalable hash-based thread distribution mechanism can be implemented at the router level with low overheads. To enhance the support further, a tool to monitor the dataflow threads’ status and a simple, functional model is also incorporated into the design. Next, a software defined NoC has been proposed to manage the distribution of dataflow threads by exploiting its reconfigurability. The second part of this work is focused more on NoC microarchitecture level. Traditional 2D-mesh topology is combined with a standard ring, to understand how such hybrid network topology can outperform the traditional topology (such as 2D-mesh). Finally, a mixed-integer linear programming based analytical model has been proposed to verify if the application threads mapped on to the free cores is optimal or not. The proposed mathematical model can be used as a yardstick to verify the solution quality of the newly developed mapping policy. It is not trivial to provide a complete low-level framework for dataflow thread execution for better resource and power management. However, this work could be considered as a primary framework to which improvements could be carried out

Scale-Out Processors

Global-scale online services, such as Google’s Web search and Facebook’s social networking, run in large-scale datacenters. Due to their massive scale, these services are designed to scale out (or distribute) their respective loads and datasets across thousands of servers in datacenters. The growing demand for online services forced service providers to build networks of datacenters, which require an enormous capital outlay for infrastructure, hardware, and power consumption. Consequently, efficiency has become a major concern in the design and operation of such datacenters, with processor efficiency being of, utmost importance, due to the significant contribution of processors to the overall datacenter performance and cost. Scale-out workloads, which are behind today’s online services, serve independent requests, and have large instruction footprints and little data locality. As such, they benefit from processor designs that feature many cores and a modestly sized Last-Level Cache (LLC), a fast access path to the LLC, and high-bandwidth interfaces to memory. Existing server-class processors with large LLCs and a handful of aggressive out-of-order cores are inefficient in executing scale-out workloads. Moreover, the scaling trajectory for these processors leads to even lower efficiency in future technology nodes. This thesis presents a family of throughput-optimal processors, called Scale-Out Processors, for the efficient execution of scale-out workloads. A unique feature of Scale-Out Processors is that they consist of multiple stand-alone modules, called pods, wherein each module is a server running an operating system and a full software stack. To design a throughput-optimal processor, we developed a methodology based on performance density, defined as throughput per unit area, to quantify how effectively an architecture uses the silicon real estate. The proposed methodology derives a performance-density optimal processor building block (i.e., pod), which tightly couples a number of cores to a small LLC via a fast interconnect. Scale-Out Processors simply consist of multiple pods with no inter-pod connectivity or coherence. Moreover, they deliver the highest throughput in today’s technology and afford near-ideal scalability as process technology advances. We demonstrate that Scale-Out Processors improve datacenters’ efficiency by 4.4x-7.1x over datacenters designed using existing server-class processors

Improving Performance and Flexibility of Fabric-Attached Memory Systems

As demands for memory-intensive applications continue to grow, the memory capacity of each computing node is expected to grow at a similar pace. In high-performance computing (HPC) systems, the memory capacity per compute node is decided upon the most demanding application that would likely run on such a system, and hence the average capacity per node in future HPC systems is expected to grow significantly. However, diverse applications run on HPC systems with different memory requirements and memory utilization can fluctuate widely from one application to another. Since memory modules are private for a corresponding computing node, a large percentage of the overall memory capacity will likely be underutilized, especially when there are many jobs with small memory footprints. Thus, as HPC systems are moving towards the exascale era, better utilization of memory is strongly desired. Moreover, as new memory technologies come on the market, the flexibility of upgrading memory and system updates becomes a major concern since memory modules are tightly coupled with the computing nodes. To address these issues, vendors are exploring fabric-attached memories (FAM) systems. In this type of system, resources are decoupled and are maintained independently. Such a design has driven technology providers to develop new protocols, such as cache-coherent interconnects and memory semantic fabrics, to connect various discrete resources and help users leverage advances in-memory technologies to satisfy growing memory and storage demands. Using these new protocols, FAM can be directly attached to a system interconnect and be easily integrated with a variety of processing elements (PEs). Moreover, systems that support FAM can be smoothly upgraded and allow multiple PEs to share the FAM memory pools using well-defined protocols. The sharing of FAM between PEs allows efficient data sharing, improves memory utilization, reduces cost by allowing flexible integration of different PEs and memory modules from several vendors, and makes it easier to upgrade the system. However, adopting FAM in HPC systems brings in new challenges. Since memory is disaggregated and is accessed through fabric networks, latency in accessing memory (efficiency) is a crucial concern. In addition, quality of service, security from neighbor nodes, coherency, and address translation overhead to access FAM are some of the problems that require rethinking for FAM systems. To this end, we study and discuss various challenges that need to be addressed in FAM systems. Firstly, we developed a simulating environment to mimic and analyze FAM systems. Further, we showcase our work in addressing the challenges to improve the performance and increase the feasibility of such systems; enforcing quality of service, providing page migration support, and enhancing security from malicious neighbor nodes

Multicore architecture optimizations for HPC applications

From single-core CPUs to detachable compute accelerators, supercomputers made a tremendous progress by using available transistors on chip and specializing hardware for a given type of computation. Today, compute nodes used in HPC employ multi-core CPUs tailored for serial execution and multiple accelerators (many-core devices or GPUs) for throughput computing. However, designing next-generation HPC system requires not only the performance improvement but also better energy efficiency. Current trend of reaching exascale level of computation asks for at least an order of magnitude increase in both of these metrics. This thesis explores HPC-specific optimizations in order to make better utilization of the available transistors and to improve performance by transparently executing parallel code across multiple GPU accelerators. First, we analyze several HPC benchmark suites, compare them against typical desktop applications, and identify the differences which advocate for proper core tailoring. Moreover, within the HPC applications, we evaluate serial and parallel code sections separately, resulting in an Asymmetric Chip Multiprocessor (ACMP) design with one core optimized for single-thread performance and many lean cores for parallel execution. Our results presented here suggests downsizing of core front-end structures providing an HPC-tailored lean core which saves 16% of the core area and 7% of power, without performance loss. Further improving an ACMP design, we identify that multiple lean cores run the same code during parallel regions. This motivated us to evaluate the idea where lean cores share the I-cache with the intent of benefiting from mutual prefetching, without increasing the average access latency. Our exploration of the multiple parameters finds the sweet spot on a wide interconnect to access the shared I-cache and the inclusion of a few line buffers to provide the required bandwidth and latency to sustain performance. The projections presented in this thesis show additional 11% area savings with a 5% energy reduction at no performance cost. These area and power savings might be attractive for many-core accelerators either for increasing the performance per area and power unit, or adding additional cores and thus improving the performance for the same hardware budget. Finally, in this thesis we study the effects of future NUMA accelerators comprised of multiple GPU devices. Reaching the limits of a single-GPU die size, next-generation GPU compute accelerators will likely embrace multi-socket designs increasing the core count and memory bandwidth. However, maintaining the UMA behavior of a single-GPU in multi-GPU systems without code rewriting stands as a challenge. We investigate multi-socket NUMA GPU designs and show that significant changes are needed to both the GPU interconnect and cache architectures to achieve performance scalability. We show that application phase effects can be exploited allowing GPU sockets to dynamically optimize their individual interconnect and cache policies, minimizing the impact of NUMA effects. Our NUMA-aware GPU outperforms a single GPU by 1.5×, 2.3×, and 3.2× while achieving 89%, 84%, and 76% of theoretical application scalability in 2, 4, and 8 sockets designs respectively. Implementable today, NUMA-aware multi-socket GPUs may be a promising candidate for performance scaling of future compute nodes used in HPC.Empezando por CPUs de un solo procesador, y pasando por aceleradores discretos, los supercomputadores han avanzado enormemente utilizando todos los transistores disponibles en el chip, y especializando los diseños para cada tipo de cálculo. Actualmente, los nodos de cálculo de un sistema de Computación de Altas Prestaciones (CAP) utilizan CPUs de múltiples procesadores, optimizados para el cálculo serial de instrucciones, y múltiples aceleradores (aceleradores gráficos, o many-core), optimizados para el cálculo paralelo. El diseño de un sistema CAP de nueva generación requiere no solo mejorar el rendimiento de cálculo, sino también mejorar la eficiencia energética. La siguiente generación de sistemas requiere mejorar un orden de magnitud en ambas métricas simultáneamente. Esta tesis doctoral explora optimizaciones específicas para sistemas CAP para hacer un mejor uso de los transistores, y para mejorar las prestaciones de forma transparente ejecutando las aplicaciones en múltiples aceleradores en paralelo. Primero, analizamos varios conjuntos de aplicaciones CAP, y las comparamos con aplicaciones para servidores y escritorio, identificando las principales diferencias que nos indican cómo ajustar la arquitectura para CAP. En las aplicaciones CAP, también analizamos la parte secuencial del código y la parte paralela de forma separada, . El resultado de este análisis nos lleva a proponer una arquitectura multiprocesador asimétrica (ACMP) , con un procesador optimizado para el código secuencial, y múltiples procesadores, más pequeños, optimizados para el procesamiento paralelo. Nuestros resultados muestran que reducir el tamaño de las estructuras del front-end (fetch, y predicción de saltos) en los procesadores paralelos nos proporciona un 16% extra de área en el chip, y una reducción de consumo del 7%. Como mejora a nuestra arquitectura ACMP, proponemos explotar el hecho de que todos los procesadores paralelos ejecutan el mismo código al mismo tiempo. Evaluamos una propuesta en que los procesadores paralelos comparten la caché de instrucciones, con la intención de que uno de ellos precargue las instrucciones para los demás procesadores (prefetching), sin aumentar la latencia media de acceso. Nuestra exploración de los distintos parámetros determina que el punto óptimo requiere una interconexión de alto ancho de banda para acceder a la caché compartida, y el uso de unos pocos line buffers para mantener el ancho de banda y la latencia necesarios. Nuestras proyecciones muestran un ahorro adicional del 11% en área y el 5% en energía, sin impacto en el rendimiento. Estos ahorros de área y energía permiten a un multiprocesador incrementar la eficiencia energética, o aumentar el rendimiento añadiendo procesador adicionales. Por último, estudiamos el efecto de usar múltiples aceleradores (GPU) en una arquitectura con tiempo de acceso a memoria no uniforme (NUMA). Una vez alcanzado el límite de número de transistores y tamaño máximo por chip, la siguiente generación de aceleradores deberá utilizar múltiples chips para aumentar el número de procesadores y el ancho de banda de acceso a memoria. Sin embargo, es muy difícil mantener la ilusión de un tiempo de acceso a memoria uniforme en un sistema multi-GPU sin reescribir el código de la aplicación. Nuestra investigación sobre sistemas multi-GPU muestra retos significativos en el diseño de la interconexión entre las GPU y la jerarquía de memorias cache. Nuestros resultados muestran que se puede explotar el comportamiento en fases de las aplicaciones para optimizar la configuración de la interconexión y las cachés de forma dinámica, minimizando el impacto de la arquitectura NUMA. Nuestro diseño mejora el rendimiento de un sistema con una única GPU en 1.5x, 2.3x y 3.2x (el 89%, 84%, y 76% del máximo teórico) usando 2, 4, y 8 GPUs en paralelo. Siendo su implementación posible hoy en dia, los nodos de cálculo con múltiples aceleradores son una alternativa atractiva para futuros sistemas CAP.Postprint (published version

Multicore architecture optimizations for HPC applications

From single-core CPUs to detachable compute accelerators, supercomputers made a tremendous progress by using available transistors on chip and specializing hardware for a given type of computation. Today, compute nodes used in HPC employ multi-core CPUs tailored for serial execution and multiple accelerators (many-core devices or GPUs) for throughput computing. However, designing next-generation HPC system requires not only the performance improvement but also better energy efficiency. Current trend of reaching exascale level of computation asks for at least an order of magnitude increase in both of these metrics. This thesis explores HPC-specific optimizations in order to make better utilization of the available transistors and to improve performance by transparently executing parallel code across multiple GPU accelerators. First, we analyze several HPC benchmark suites, compare them against typical desktop applications, and identify the differences which advocate for proper core tailoring. Moreover, within the HPC applications, we evaluate serial and parallel code sections separately, resulting in an Asymmetric Chip Multiprocessor (ACMP) design with one core optimized for single-thread performance and many lean cores for parallel execution. Our results presented here suggests downsizing of core front-end structures providing an HPC-tailored lean core which saves 16% of the core area and 7% of power, without performance loss. Further improving an ACMP design, we identify that multiple lean cores run the same code during parallel regions. This motivated us to evaluate the idea where lean cores share the I-cache with the intent of benefiting from mutual prefetching, without increasing the average access latency. Our exploration of the multiple parameters finds the sweet spot on a wide interconnect to access the shared I-cache and the inclusion of a few line buffers to provide the required bandwidth and latency to sustain performance. The projections presented in this thesis show additional 11% area savings with a 5% energy reduction at no performance cost. These area and power savings might be attractive for many-core accelerators either for increasing the performance per area and power unit, or adding additional cores and thus improving the performance for the same hardware budget. Finally, in this thesis we study the effects of future NUMA accelerators comprised of multiple GPU devices. Reaching the limits of a single-GPU die size, next-generation GPU compute accelerators will likely embrace multi-socket designs increasing the core count and memory bandwidth. However, maintaining the UMA behavior of a single-GPU in multi-GPU systems without code rewriting stands as a challenge. We investigate multi-socket NUMA GPU designs and show that significant changes are needed to both the GPU interconnect and cache architectures to achieve performance scalability. We show that application phase effects can be exploited allowing GPU sockets to dynamically optimize their individual interconnect and cache policies, minimizing the impact of NUMA effects. Our NUMA-aware GPU outperforms a single GPU by 1.5×, 2.3×, and 3.2× while achieving 89%, 84%, and 76% of theoretical application scalability in 2, 4, and 8 sockets designs respectively. Implementable today, NUMA-aware multi-socket GPUs may be a promising candidate for performance scaling of future compute nodes used in HPC.Empezando por CPUs de un solo procesador, y pasando por aceleradores discretos, los supercomputadores han avanzado enormemente utilizando todos los transistores disponibles en el chip, y especializando los diseños para cada tipo de cálculo. Actualmente, los nodos de cálculo de un sistema de Computación de Altas Prestaciones (CAP) utilizan CPUs de múltiples procesadores, optimizados para el cálculo serial de instrucciones, y múltiples aceleradores (aceleradores gráficos, o many-core), optimizados para el cálculo paralelo. El diseño de un sistema CAP de nueva generación requiere no solo mejorar el rendimiento de cálculo, sino también mejorar la eficiencia energética. La siguiente generación de sistemas requiere mejorar un orden de magnitud en ambas métricas simultáneamente. Esta tesis doctoral explora optimizaciones específicas para sistemas CAP para hacer un mejor uso de los transistores, y para mejorar las prestaciones de forma transparente ejecutando las aplicaciones en múltiples aceleradores en paralelo. Primero, analizamos varios conjuntos de aplicaciones CAP, y las comparamos con aplicaciones para servidores y escritorio, identificando las principales diferencias que nos indican cómo ajustar la arquitectura para CAP. En las aplicaciones CAP, también analizamos la parte secuencial del código y la parte paralela de forma separada, . El resultado de este análisis nos lleva a proponer una arquitectura multiprocesador asimétrica (ACMP) , con un procesador optimizado para el código secuencial, y múltiples procesadores, más pequeños, optimizados para el procesamiento paralelo. Nuestros resultados muestran que reducir el tamaño de las estructuras del front-end (fetch, y predicción de saltos) en los procesadores paralelos nos proporciona un 16% extra de área en el chip, y una reducción de consumo del 7%. Como mejora a nuestra arquitectura ACMP, proponemos explotar el hecho de que todos los procesadores paralelos ejecutan el mismo código al mismo tiempo. Evaluamos una propuesta en que los procesadores paralelos comparten la caché de instrucciones, con la intención de que uno de ellos precargue las instrucciones para los demás procesadores (prefetching), sin aumentar la latencia media de acceso. Nuestra exploración de los distintos parámetros determina que el punto óptimo requiere una interconexión de alto ancho de banda para acceder a la caché compartida, y el uso de unos pocos line buffers para mantener el ancho de banda y la latencia necesarios. Nuestras proyecciones muestran un ahorro adicional del 11% en área y el 5% en energía, sin impacto en el rendimiento. Estos ahorros de área y energía permiten a un multiprocesador incrementar la eficiencia energética, o aumentar el rendimiento añadiendo procesador adicionales. Por último, estudiamos el efecto de usar múltiples aceleradores (GPU) en una arquitectura con tiempo de acceso a memoria no uniforme (NUMA). Una vez alcanzado el límite de número de transistores y tamaño máximo por chip, la siguiente generación de aceleradores deberá utilizar múltiples chips para aumentar el número de procesadores y el ancho de banda de acceso a memoria. Sin embargo, es muy difícil mantener la ilusión de un tiempo de acceso a memoria uniforme en un sistema multi-GPU sin reescribir el código de la aplicación. Nuestra investigación sobre sistemas multi-GPU muestra retos significativos en el diseño de la interconexión entre las GPU y la jerarquía de memorias cache. Nuestros resultados muestran que se puede explotar el comportamiento en fases de las aplicaciones para optimizar la configuración de la interconexión y las cachés de forma dinámica, minimizando el impacto de la arquitectura NUMA. Nuestro diseño mejora el rendimiento de un sistema con una única GPU en 1.5x, 2.3x y 3.2x (el 89%, 84%, y 76% del máximo teórico) usando 2, 4, y 8 GPUs en paralelo. Siendo su implementación posible hoy en dia, los nodos de cálculo con múltiples aceleradores son una alternativa atractiva para futuros sistemas CAP

Vorhersagbares und zur Laufzeit adaptierbares On-Chip Netzwerk für gemischt kritische Echtzeitsysteme

The industry of safety-critical and dependable embedded systems calls for even cheaper, high performance platforms that allow flexibility and an efficient verification of safety and real-time requirements. To cope with the increasing complexity of interconnected functions and to reduce the cost and power consumption of the system, multicore systems are used to efficiently integrate different processing units in the same chip. Networks-on-chip (NoCs), as a modular interconnect, are used as a promising solution for such multiprocessor systems on chip (MPSoCs), due to their scalability and performance. For safety-critical systems, a major goal is the avoidance of hazards. For this, safety-critical systems are qualified or even certified to prove the correctness of the functioning under all possible cases. A predictable behaviour of the NoC can help to ease the qualification process of the system. To achieve the required predictability, designers have two classes of solutions: quality of service mechanisms and (formal) analysis. For mixed-criticality systems, isolation and analysis approaches must be combined to efficiently achieve the desired predictability. Traditional NoC analysis and architecture concepts tackle only a subpart of the challenges: they focus on either performance or predictability. Existing, predictable NoCs are deemed too expensive and inflexible to host a variety of applications with opposing constraints. And state-of-the-art analyses neglect certain platform properties to verify the behaviour. Together this leads to a high over-provisioning of the hardware resources as well as adverse impacts on system performance, and on the flexibility of the system. In this work we tackle these challenges and develop a predictable and runtime-adaptable NoC architecture that efficiently integrates mixed-critical applications with opposing constraints. Additionally, we present a modelling and analysis framework for NoCs that accounts for backpressure. This framework enables to evaluate the performance and reliability early at design time. Hence, the designer can assess multiple design decisions by using abstract models and formal approaches.Die Industrie der sicherheitskritischen und zuverlässigen eingebetteten Systeme verlangt nach noch günstigeren, leistungsfähigeren Plattformen, welche Flexibilität und eine effiziente Überprüfung der Sicherheits- und Echtzeitanforderungen ermöglichen. Um der zunehmenden Komplexität der zunehmend vernetzten Funktionen gerecht zu werden und die Kosten und den Stromverbrauch eines Systems zu reduzieren, werden Mehrkern-Systeme eingesetzt. On-Chip Netzwerke werden aufgrund ihrer Skalierbarkeit und Leistung als vielversprechende Lösung für solch Mehrkern-Systeme eingesetzt. Bei sicherheitskritischen Systemen ist die Vermeidung von Gefahren ein wesentliches Ziel. Dazu werden sicherheitskritische Systeme qualifiziert oder zertifiziert, um die Funktionsfähigkeit in allen möglichen Fällen nachzuweisen. Ein vorhersehbares Verhalten des on-Chip Netzwerks kann dabei helfen, den Qualifizierungsprozess des Systems zu erleichtern. Um die erforderliche Vorhersagbarkeit zu erreichen, gibt es zwei Klassen von Lösungen: Quality of Service Mechanismen und (formale) Analyse. Für Systeme mit gemischter Relevanz müssen Isolationsmechanismen und Analyseansätze kombiniert werden, um die gewünschte Vorhersagbarkeit effizient zu erreichen. Traditionelle Analyse- und Architekturkonzepte für on-Chip Netzwerke lösen nur einen Teil dieser Herausforderungen: sie konzentrieren sich entweder auf Leistung oder Vorhersagbarkeit. Existierende vorhersagbare on-Chip Netzwerke werden als zu teuer und unflexibel erachtet, um eine Vielzahl von Anwendungen mit gegensätzlichen Anforderungen zu integrieren. Und state-of-the-art Analysen vernachlässigen bzw. vereinfachen bestimmte Plattformeigenschaften, um das Verhalten überprüfen zu können. Dies führt zu einer hohen Überbereitstellung der Hardware-Ressourcen als auch zu negativen Auswirkungen auf die Systemleistung und auf die Flexibilität des Systems. In dieser Arbeit gehen wir auf diese Herausforderungen ein und entwickeln eine vorhersehbare und zur Laufzeit anpassbare Architektur für on-Chip Netzwerke, welche gemischt-kritische Anwendungen effizient integriert. Zusätzlich stellen wir ein Modellierungs- und Analyseframework für on-Chip Netzwerke vor, das den Paketrückstau berücksichtigt. Dieses Framework ermöglicht es, Designentscheidungen anhand abstrakter Modelle und formaler Ansätze frühzeitig beurteilen

Predictable multi-processor system on chip design for multimedia applications

The design of multimedia systems has become increasingly complex due to consumer requirements. Consumers demand the functionalities offered by a huge desktop from these systems. Many of these systems are mobile. Therefore, power consumption and size of these devices should be small. These systems are increasingly becoming multi-processor based (MPSoCs) for the reasons of power and performance. Applications execute on these systems in different combinations also known as use-cases. Applications may have different performance requirements in each use-case. Currently, verification of all these use-cases takes bulk of the design effort. There is a need for analysis based techniques so that the platforms have a predictable behaviour and in turn provide guarantees on performance without expending precious man hours on verification. In this dissertation, techniques and architectures have been developed to design and manage these multi-processor based systems efficiently. The dissertation presents predictable architectural components for MPSoCs, a Predictable MPSoC design strategy, automatic platform synthesis tool, a run-time system and an MPSoC simulation technique. The introduction of predictability helps in rapid design of MPSoC platforms. Chapter 1 of the thesis studies the trends in modern multimedia applications and processor architectures. The chapter further highlights the problems in the design of MPSoC platforms and emphasizes the need of predictable design techniques. Predictable design techniques require predictable application and architectural components. The chapter further elaborates on Synchronous Data Flow Graphs which are used to model the applications throughout this thesis. The chapter presents the architecture template used in this thesis and enlists the contributions of the thesis. One of the contributions of this thesis is the design of a predictable component called communication assist. Chapter 2 of the thesis describes the architecture of this communication assist. The communication assist presented in this thesis not only decouples the communication from computation but also provides timing guarantees. Based on this communication assist, an MPSoC platform generation technique has been presented that can design MPSoC platforms capable of satisfying the throughput constraints of multiple applications in all use-cases. The technique is presented in Chapter 3. The design strategy uses three simple steps for platform design. In the first step it finds the required number of processors. The second step minimizes the communication interconnect between the processors and the third step minimizes the communication memory requirement of the platform. Further in Chapter 4, a tool has been developed to generate CA-based platforms for FPGAs. The output of this tool can be used to synthesize platforms on real hardware with the help of FPGA synthesis tools. The applications executing on these platforms often exhibit dynamism e.g. variation in task execution times and change in application throughput requirements. Further, new applications may often be added by consumers at run-time. Resource managers have been presented in literature to handle such dynamic situations. However, the scalability of these resource managers becomes an issue with the increase in number of processors and applications. Chapter 5 presents distributed run-time resource management techniques. Two versions of distributed resource managers have been presented which are scalable with the number of applications and processors. MPSoC platforms for real-time applications are designed assuming worst-case task execution times. It is known that the difference between average-case and worst-case behaviour can be quite large. Therefore, knowing the average case performance is also important for the system designer, and software simulation is often employed to estimate this. However, simulation in software is slow and does not scale with the number of applications and processing elements. In Chapter 6, a fast and scalable simulation methodology is introduced that can simulate the execution of multiple applications on an MPSoC platform. It is based on parallel execution of SDF (Synchronous Data Flow) models of applications. The simulation methodology uses Parallel Discrete Event Simulation (PDES) primitives and it is termed as "Smart Conservative PDES". The methodology generates a parallel simulator which is synthesizable on FPGAs. The framework can also be used to model dynamic arbitration policies which are difficult to analyse using models. The generated platform is also useful in carrying out Design Space Exploration as shown in the thesis. Finally, Chapter 7 summarizes the main findings and (practical) implications of the studies described in previous chapters of this dissertation. Using the contributions mentioned in the thesis, a designer can design and implement predictable multiprocessor based systems capable of satisfying throughput constraints of multiple applications in given set of use-cases, and employ resource management strategies to deal with dynamism in the applications. The chapter also describes the main limitations of this dissertation and makes suggestions for future research