Adaptive runtime-assisted block prefetching on chip-multiprocessors

Memory stalls are a significant source of performance degradation in modern processors. Data prefetching is a widely adopted and well studied technique used to alleviate this problem. Prefetching can be performed by the hardware, or be initiated and controlled by software. Among software controlled prefetching we find a wide variety of schemes, including runtime-directed prefetching and more specifically runtime-directed block prefetching. This paper proposes a hybrid prefetching mechanism that integrates a software driven block prefetcher with existing hardware prefetching techniques. Our runtime-assisted software prefetcher brings large blocks of data on-chip with the support of a low cost hardware engine, and synergizes with existing hardware prefetchers that manage locality at a finer granularity. The runtime system that drives the prefetch engine dynamically selects which cache to prefetch to. Our evaluation on a set of scientific benchmarks obtains a maximum speed up of 32 and 10 % on average compared to a baseline with hardware prefetching only. As a result, we also achieve a reduction of up to 18 and 3 % on average in energy-to-solution.Peer ReviewedPostprint (author's final draft

Scalability of broadcast performance in wireless network-on-chip

Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version

FASTM: a log-based hardware transactional memory with fast abort recovery

Version management, one of the key design dimensions of Hardware Transactional Memory (HTM) systems, defines where and how transactional modifications are stored. Current HTM systems use either eager or lazy version management. Eager systems that keep new values in-place while they hold old values in a software log, suffer long delays when aborts are frequent because the pre-transactional state is recovered by software. Lazy systems that buffer new values in specialized hardware offer complex and inefficient solutions to handle hardware overflows, which are common in applications with coarse-grain transactions. In this paper, we present FASTM, an eager log-based HTM that takes advantage of the processor’s cache hierarchy to provide fast abort recovery. FASTM uses a novel coherence protocol to buffer the transactional modifications in the first level cache and to keep the non-speculative values in the higher levels of the memory hierarchy. This mechanism allows fast abort recovery of transactions that do not overflow the first level cache resources. Contrary to lazy HTM systems, committing transactions do not have to perform any actions in order to make their results visible to the rest of the system. FASTM keeps the pre-transactional state in a software-managed log as well, which permits the eviction of speculative values and enables transparent execution even in the case of cache overflow. This approach simplifies eviction policies without degrading performance, because it only falls back to a software abort recovery for transactions whose modified state has overflowed the cache. Simulation results show that FASTM achieves a speed-up of 43% compared to LogTM-SE, improving the scalability of applications with coarse-grain transactions and obtaining similar performance to an ideal eager HTM with zero-cost abort recovery.Peer ReviewedPostprint (published version

Hybrid Caching for Chip Multiprocessors Using Compiler-Based Data Classification

The high performance delivered by modern computer system keeps scaling with an increasingnumber of processors connected using distributed network on-chip. As a result, memory accesslatency, largely dominated by remote data cache access and inter-processor communication, is becoming a critical performance bottleneck. To release this problem, it is necessary to localize data access as much as possible while keep efficient on-chip cache memory utilization. Achieving this however, is application dependent and needs a keen insight into the memory access characteristics of the applications. This thesis demonstrates how using fairly simple thus inexpensive compiler analysis memory accesses can be classified into private data access and shared data access. In addition, we introduce a third classification named probably private access and demonstrate the impact of this category compared to traditional private and shared memory classification. The memory access classification information from the compiler analysis is then provided to the runtime system through a modified memory allocator and page table to facilitate a hybrid private-shared caching technique. The hybrid cache mechanism is aware of different data access classification and adopts appropriate placement and search policies accordingly to improve performance. Our analysis demonstrates that many applications have a significant amount of both private and shared data and that compiler analysis can identify the private data effectively for many applications. Experimentsresults show that the implemented hybrid caching scheme achieves 4.03% performance improvement over state of the art NUCA-base caching

REBOUND: An open-source multi-purpose N-body code for collisional dynamics

REBOUND is a new multi-purpose N-body code which is freely available under an open-source license. It was designed for collisional dynamics such as planetary rings but can also solve the classical N-body problem. It is highly modular and can be customized easily to work on a wide variety of different problems in astrophysics and beyond. REBOUND comes with three symplectic integrators: leap-frog, the symplectic epicycle integrator (SEI) and a Wisdom-Holman mapping (WH). It supports open, periodic and shearing-sheet boundary conditions. REBOUND can use a Barnes-Hut tree to calculate both self-gravity and collisions. These modules are fully parallelized with MPI as well as OpenMP. The former makes use of a static domain decomposition and a distributed essential tree. Two new collision detection modules based on a plane-sweep algorithm are also implemented. The performance of the plane-sweep algorithm is superior to a tree code for simulations in which one dimension is much longer than the other two and in simulations which are quasi-two dimensional with less than one million particles. In this work, we discuss the different algorithms implemented in REBOUND, the philosophy behind the code's structure as well as implementation specific details of the different modules. We present results of accuracy and scaling tests which show that the code can run efficiently on both desktop machines and large computing clusters.Comment: 10 pages, 9 figures, accepted by A&A, source code available at https://github.com/hannorein/reboun

Simulation Of Multi-core Systems And Interconnections And Evaluation Of Fat-Mesh Networks

Simulators are very important in computer architecture research as they enable the exploration of new architectures to obtain detailed performance evaluation without building costly physical hardware. Simulation is even more critical to study future many-core architectures as it provides the opportunity to assess currently non-existing computer systems. In this thesis, a multiprocessor simulator is presented based on a cycle accurate architecture simulator called SESC. The shared L2 cache system is extended into a distributed shared cache (DSC) with a directory-based cache coherency protocol. A mesh network module is extended and integrated into SESC to replace the bus for scalable inter-processor communication. While these efforts complete an extended multiprocessor simulation infrastructure, two interconnection enhancements are proposed and evaluated. A novel non-uniform fat-mesh network structure similar to the idea of fat-tree is proposed. This non-uniform mesh network takes advantage of the average traffic pattern, typically all-to-all in DSC, to dedicate additional links for connections with heavy traffic (e.g., near the center) and fewer links for lighter traffic (e.g., near the periphery). Two fat-mesh schemes are implemented based on different routing algorithms. Analytical fat-mesh models are constructed by presenting the expressions for the traffic requirements of personalized all-to-all traffic. Performance improvements over the uniform mesh are demonstrated in the results from the simulator. A hybrid network consisting of one packet switching plane and multiple circuit switching planes is constructed as the second enhancement. The circuit switching planes provide fast paths between neighbors with heavy communication traffic. A compiler technique that abstracts the symbolic expressions of benchmarks' communication patterns can be used to help facilitate the circuit establishment

Architectural Support for High-Performance, Power-Efficient and Secure Multiprocessor Systems

High performance systems have been widely adopted in many fields and the demand for better performance is constantly increasing. And the need of powerful yet flexible systems is also increasing to meet varying application requirements from diverse domains. Also, power efficiency in high performance computing has been one of the major issues to be resolved. The power density of core components becomes significantly higher, and the fraction of power supply in total management cost is dominant. Providing dependability is also a main concern in large-scale systems since more hardware resources can be abused by attackers. Therefore, designing high-performance, power-efficient and secure systems is crucial to provide adequate performance as well as reliability to users. Adhering to using traditional design methodologies for large-scale computing systems has a limit to meet the demand under restricted resource budgets. Interconnecting a large number of uniprocessor chips to build parallel processing systems is not an efficient solution in terms of performance and power. Chip multiprocessor (CMP) integrates multiple processing cores and caches on a chip and is thought of as a good alternative to previous design trends. In this dissertation, we deal with various design issues of high performance multiprocessor systems based on CMP to achieve both performance and power efficiency while maintaining security. First, we propose a fast and secure off-chip interconnects through minimizing network overheads and providing an efficient security mechanism. Second, we propose architectural support for fast and efficient memory protection in CMP systems, making the best use of the characteristics in CMP environments and multi-threaded workloads. Third, we propose a new router design for network-on-chip (NoC) based on a new memory technique. We introduce hybrid input buffers that use both SRAM and STT-MRAM for better performance as well as power efficiency. Simulation results show that the proposed schemes improve the performance of off-chip networks through reducing the message size by 54% on average. Also, the schemes diminish the overheads of bounds checking operations, thus enhancing the overall performance by 11% on average. Adopting hybrid buffers in NoC routers contributes to increasing the network throughput up to 21%

Improving Energy and Area Scalability of the Cache Hierarchy in CMPs

As the core counts increase in each chip multiprocessor generation, CMPs should improve scalability in performance, area, and energy consumption to meet the demands of larger core counts. Directory-based protocols constitute the most scalable alternative. A conventional directory, however, suffers from an inefficient use of storage and energy. First, the large, non-scalable, sharer vectors consume unnecessary area and leakage, especially considering that most of the blocks tracked in a directory are cached by a single core. Second, although increasing directory size and associativity could boost system performance by reducing the coverage misses, it would come at the expense of area and energy consumption. This thesis focuses and exploits the important differences of behavior between private and shared blocks from the directory point of view. These differences claim for a separate management of both types of blocks at the directory. First, we propose the PS-Directory, a two-level directory cache that keeps the reduced number of frequently accessed shared entries in a small and fast first-level cache, namely Shared Directory Cache, and uses a larger and slower second-level Private Directory Cache to track the large amount of private blocks. Experimental results show that, compared to a conventional directory, the PS-Directory improves performance while also reducing silicon area and energy consumption. In this thesis we also show that the shared/private ratio of entries in the directory varies across applications and across different execution phases within the applications, which encourages us to propose Dynamic Way Partitioning (DWP) Directory. DWP-Directory reduces the number of ways with storage for shared blocks and it allows this storage to be powered off or on at run-time according to the dynamic requirements of the applications following a repartitioning algorithm. Results show similar performance as a traditional directory with high associativity, and similar area requirements as recent state-of-the-art schemes. In addition, DWP-Directory achieves notable static and dynamic power consumption savings. This dissertation also deals with the scalability issues in terms of power found in processor caches. A significant fraction of the total power budget is consumed by on-chip caches which are usually deployed with a high associativity degree (even L1 caches are being implemented with eight ways) to enhance the system performance. On a cache access, each way in the corresponding set is accessed in parallel, which is costly in terms of energy. This thesis presents the PS-Cache architecture, an energy-efficient cache design that reduces the number of accessed ways without hurting the performance. The PS-Cache takes advantage of the private-shared knowledge of the referenced block to reduce energy by accessing only those ways holding the kind of block looked up. Results show significant dynamic power consumption savings. Finally, we propose an energy-efficient architectural design that can be effectively applied to any kind of set-associative cache memory, not only to processor caches. The proposed approach, called the Tag Filter (TF) Architecture, filters the ways accessed in the target cache set, and just a few ways are searched in the tag and data arrays. This allows the approach to reduce the dynamic energy consumption of caches without hurting their access time. For this purpose, the proposed architecture holds the X least significant bits of each tag in a small auxiliary X-bit-wide array. These bits are used to filter the ways where the least significant bits of the tag do not match with the bits in the X-bit array. Experimental results show that this filtering mechanism achieves energy consumption in set-associative caches similar to direct mapped ones. Experimental results show that the proposals presented in this thesis offer a good tradeoff among these three major design axes.Conforme se incrementa el número de núcleos en las nuevas generaciones de multiprocesadores en chip, los CMPs deben de escalar en prestaciones, área y consumo energético para cumplir con las demandas de un número núcleos mayor. Los protocolos basados en directorio constituyen la alternativa más escalable. Un directorio convencional, no obstante, sufre de una utilización ineficiente de almacenamiento y energía. En primer lugar, los grandes y poco escalables vectores de compartidores consumen una cantidad de energía de fuga y de área innecesaria, especialmente si se tiene en consideración que la mayoría de los bloques en un directorio solo se encuentran en la cache de un único núcleo. En segundo lugar, aunque incrementar el tamaño y la asociatividad del directorio aumentaría las prestaciones del sistema, esto supondría un incremento notable en el consumo energético. Esta tesis estudia las diferencias significativas entre el comportamiento de bloques privados y compartidos en el directorio, lo que nos lleva hacia una gestión separada para cada uno de los tipos de bloque. Proponemos el PS-Directory, una cache de directorio de dos niveles que mantiene el reducido número de las entradas compartidas, que son los que se acceden con más frecuencia, en una estructura pequeña de primer nivel (concretamente, la Shared Directory Cache) y que utiliza una estructura más grande y lenta en el segundo nivel (Private Directory Cache) para poder mantener la información de los bloques privados. Los resultados experimentales muestran que, comparado con un directorio convencional, el PS-Directory consigue mejorar las prestaciones a la vez que reduce el área de silicio y el consumo energético. Ya que el ratio compartido/privado de las entradas en el directorio varia entre aplicaciones y entre las diferentes fases de ejecución dentro de las aplicaciones, proponemos el Dynamic Way Partitioning (DWP) Directory. El DWP-Directory reduce el número de vías que almacenan entradas compartidas y permite que éstas se enciendan o apaguen en tiempo de ejecución según los requisitos dinámicos de las aplicaciones según un algoritmo de reparticionado. Los resultados muestran unas prestaciones similares a un directorio tradicional de alta asociatividad y un área similar a otros esquemas recientes del estado del arte. Adicionalmente, el DWP-Directory obtiene importantes reducciones de consumo estático y dinámico. Esta disertación también se enfrenta a los problemas de escalabilidad que se pueden encontrar en las memorias cache. En un acceso a la cache, se accede a cada vía del conjunto en paralelo, siendo así un acción costosa en energía. Esta tesis presenta la arquitectura PS-Cache, un diseño energéticamente eficiente que reduce el número de vías accedidas sin perjudicar las prestaciones. La PS-Cache utiliza la información del estado privado-compartido del bloque referenciado para reducir la energía, ya que tan solo accedemos a un subconjunto de las vías que mantienen los bloques del tipo solicitado. Los resultados muestran unos importantes ahorros de energía dinámica. Finalmente, proponemos otro diseño de arquitectura energéticamente eficiente que se puede aplicar a cualquier tipo de memoria cache asociativa por conjuntos. La propuesta, la Tag Filter (TF) Architecture, filtra las vías accedidas en el conjunto de la cache, de manera que solo se mira un número reducido de vías tanto en el array de etiquetas como en el de datos. Esto permite que nuestra propuesta reduzca el consumo de energía dinámico de las caches sin perjudicar su tiempo de acceso. Los resultados experimentales muestran que este mecanismo de filtrado es capaz de obtener un consumo energético en caches asociativas por conjunto similar de las caches de mapeado directo. Los resultados experimentales muestran que las propuestas presentadas en esta tesis consiguen un buen compromiso entre estos tres importantes pilares de diseño.Conforme s'incrementen el nombre de nuclis en les noves generacions de multiprocessadors en xip, els CMPs han d'escalar en prestacions, àrea i consum energètic per complir en les demandes d'un nombre de nuclis major. El protocols basats en directori són l'alternativa més escalable. Un directori convencional, no obstant, pateix una utilització ineficient d'emmagatzematge i energia. En primer lloc, els grans i poc escalables vectors de compartidors consumeixen una quantitat d'energia estàtica i d'àrea innecessària, especialment si es considera que la majoria dels blocs en un directori només es troben en la cache d'un sol nucli. En segon lloc, tot i que incrementar la grandària i l'associativitat del directori augmentaria les prestacions del sistema, això suposaria un increment notable en el consum d'energia. Aquesta tesis estudia les diferències significatives entre el comportament de blocs privats i compartits dins del directori, la qual cosa ens guia cap a una gestió separada per a cada un dels tipus de bloc. Proposem el PS-Directory, una cache de directori de dos nivells que manté el reduït nombre de les entrades de blocs compartits, que són els que s'accedeixen amb més freqüència, en una estructura menuda de primer nivell (concretament, la Shared Directory Cache) i que empra una estructura més gran i lenta en el segon nivell (Private Directory Cache) per poder mantenir la informació dels blocs privats. Els resultats experimentals mostren que, comparat amb un directori convencional, el PS-Directory aconsegueix millorar les prestacions a la vegada que redueix l'àrea de silici i el consum energètic. Ja que la ràtio compartit/privat de les entrades en el directori varia entre aplicacions i entre les diferents fases d'execució dins de les aplicacions, proposem el Dynamic Way Partitioning (DWP) Directory. DWP-Directory redueix el nombre de vies que emmagatzemen entrades compartides i permeten que aquest s'encengui o apagui en temps d'execució segons els requeriments dinàmics de les aplicacions seguint un algoritme de reparticionat. Els resultats mostren unes prestacions similars a un directori tradicional d'alta associativitat i una àrea similar a altres esquemes recents de l'estat de l'art. Adicionalment, el DWP-Directory obté importants reduccions de consum estàtic i dinàmic. Aquesta dissertació també s'enfronta als problemes d'escalabilitat que es poden tro- bar en les memòries cache. Les caches on-chip consumeixen una part significativa del consum total del sistema. Aquestes caches implementen un alt nivell d'associativitat. En un accés a la cache, s'accedeix a cada via del conjunt en paral·lel, essent així una acció costosa en energia. Aquesta tesis presenta l'arquitectura PS-Cache, un disseny energèticament eficient que redueix el nombre de vies accedides sense perjudicar les prestacions. La PS-Cache utilitza la informació de l'estat privat-compartit del bloc referenciat per a reduir energia, ja que només accedim al subconjunt de vies que mantenen blocs del tipus sol·licitat. Els resultats mostren uns importants estalvis d'energia dinàmica. Finalment, proposem un altre disseny d'arquitectura energèticament eficient que es pot aplicar a qualsevol tipus de memòria cache associativa per conjunts. La proposta, la Tag Filter (TF) Architecture, filtra les vies accedides en el conjunt de la cache, de manera que només un reduït nombre de vies es miren tant en el array d'etiquetes com en el de dades. Això permet que la nostra proposta redueixi el consum dinàmic energètic de les caches sense perjudicar el seu temps d'accés. Els resultats experimentals mostren que aquest mecanisme de filtre és capaç d'obtenir un consum energètic en caches associatives per conjunt similar al de les caches de mapejada directa. Els resultats experimentals mostren que les propostes presentades en aquesta tesis conseguixen un bon compromís entre aquestros tres importants pilars de diseny.Valls Mompó, JJ. (2017). Improving Energy and Area Scalability of the Cache Hierarchy in CMPs [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/79551TESI