Coordinated Control of a Mobile Manipulator

In this technical report, we investigate modeling, control, and coordination of mobile manipulators. A mobile manipulator in this study consists of a robotic manipulator and a mobile platform, with the manipulator being mounted atop the mobile platform. A mobile manipulator combines the dextrous manipulation capability offered by fixed-base manipulators and the mobility offered by mobile platforms. While mobile manipulators offer a tremendous potential for flexible material handling and other tasks, at the same time they bring about a number of challenging issues rather than simply increasing the structural complexity. First, combining a manipulator and a platform creates redundancy. Second, a wheeled mobile platform is subject to nonholonomic constraints. Third, there exists dynamic interaction between the manipulator and the mobile platform. Fourth, manipulators and mobile platforms have different bandwidths. Mobile platforms typically have slower dynamic response than manipulators. The objective of the thesis is to develop control algorithms that effectively coordinate manipulation and mobility of mobile manipulators. We begin with deriving the motion equations of mobile manipulators. The derivation presented here makes use of the existing motion equations of manipulators and mobile platforms, and simply introduces the velocity and acceleration dependent terms that account for the dynamic interaction between manipulators and mobile platforms. Since nonholonomic constraints play a critical role in control of mobile manipulators, we then study the control properties of nonholonomic dynamic systems, including feedback linearization and internal dynamics. Based on the newly proposed concept of preferred operating region, we develop a set of coordination algorithms for mobile manipulators. While the manipulator performs manipulation tasks, the mobile platform is controlled to always bring the configuration of the manipulator into a preferred operating region. The control algorithms for two types of tasks - dragging motion and following motion - are discussed in detail. The effects of dynamic interaction are also investigated. To verify the efficacy of the coordination algorithms, we conduct numerical simulations with representative task trajectories. Additionally, the control algorithms for the dragging motion and following motion have been implemented on an experimental mobile manipulator. The results from the simulation and experiment are presented to support the proposed control algorithms

End-effector vibrations reduction in trajectory tracking for mobile manipulator

A method of motion planning for a mobile manipulator taking into account damping the end-effector vibrations is presented. The primary task of the robot is to trace a given end-effector trajectory. The redundant degrees of freedom are used to fulfil secondary objectives such as minimisation of platform kinetic energy and maximisation of holonomic manipulability measure, which leads to reduction of the end-effector vibrations. The method is based on Jacobian pseudo inverse at the acceleration level. Nonholonomic constraints in a Pfaffian form are explicitly incorporated to the control algorithm. A computer example involving a mobile manipulator consisting of a nonholonomic platform (2, 0) class and SCARA-type holonomic manipulator operating in two-dimensional task space is also presented

Teleoperating a mobile manipulator and a free-flying camera from a single haptic device

© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksThe paper presents a novel teleoperation system that allows the simultaneous and continuous command of a ground mobile manipulator and a free flying camera, implemented using an UAV, from which the operator can monitor the task execution in real-time. The proposed decoupled position and orientation workspace mapping allows the teleoperation from a single haptic device with bounded workspace of a complex robot with unbounded workspace. When the operator is reaching the position and orientation boundaries of the haptic workspace, linear and angular velocity components are respectively added to the inputs of the mobile manipulator and the flying camera. A user study on a virtual environment has been conducted to evaluate the performance and the workload on the user before and after proper training. Analysis on the data shows that the system complexity is not an obstacle for an efficient performance. This is a first step towards the implementation of a teleoperation system with a real mobile manipulator and a low-cost quadrotor as the free-flying camera.Accepted versio

Coordinating Locomotion and Manipulation of a Mobile Manipulator

A mobile manipulator in this study is a manipulator mounted on a mobile platform. Assuming the end point of the manipulator is guided, e.g., by a human operator to follow an arbitrary trajectory, it is desirable that the mobile platform is able to move as to position the manipulator in certain preferred configurations. Since the motion of the manipulator is unknown a priori, the platform has to use the measured joint position information of the manipulator for motion planning. This paper presents a planning and control algorithm for the platform so that the manipulator is always positioned at the preferred configurations measured by its manipulability. Simulation results are presented to illustrate the efficacy of the algorithm. The use of the resulting algorithm in a number of applications is also discussed

Dynamic simulation of a mobile manipulator with joint friction.

Mission criticality in disaster search and rescue robotics highlights the requirement of specialized equipment. Specialized manipulators that can be mounted on existing mobile platforms can improve rescue process. However specialized manipulators capable of lifting heavy loads are not yet available. Moreover, effect of joint friction in these manipulators requires further analysis. To address these issues, concepts of model based design and concurrent engineering are applied to develop a virtual prototype of the manipulator mechanism. Closed loop manipulator mechanism actuated by prismatic actuators is proposed herein. The mechanics model of the manipulator is presented here as a set of equations and as multibody models. Mechanistic simulation of the virtual prototype has been conducted and the results are presented. Combined friction model that comprises Coulomb, viscous and Stribeck friction is used to compute frictional forces and torques generated at each one degree of freedom translational and rotational joints. Multidisciplinary approach employed in this work improves product design cycle time for complex mechanisms. Kinematic and dynamic parameters are presented in this paper. Friction forces and torques from simulation are also presented in addition to the visual representation of the virtual prototype

Passivity-Based Tracking Control of a Mobile Manipulator Robot

This work presents a control approach based on the passivity principle, developed to guarantee performance of the application used to track the trajectory of mobile manipulator when disturbed. By exploiting the particularity of the mobile manipulator robots modelling equipped with a nonholonomic mobile base, we present a global control law for the mobile manipulator as a single system. This control allows taking into account the whole system and modifying its dynamics by introducing a highly non-linear regressor matrix to consider uncertainties and modeling constraints. The presented controller is applied to the mobile manipulator robot composed of a manipulator's arm with 2 DDL mounted on a mobile unicycle platform. Simulation tests validate the performance of the proposed approach when external disturbances occur; showing an acceptable performance of the system's stability and validated by exploiting the Lyapunov theory. &nbsp

Passivity-Based Tracking Control of a Mobile Manipulator Robot

This work presents a control approach based on the passivity principle, developed to guarantee performance of the application used to track the trajectory of mobile manipulator when disturbed. By exploiting the particularity of the mobile manipulator robots modelling equipped with a nonholonomic mobile base, we present a global control law for the mobile manipulator as a single system. This control allows taking into account the whole system and modifying its dynamics by introducing a highly non-linear regressor matrix to consider uncertainties and modeling constraints. The presented controller is applied to the mobile manipulator robot composed of a manipulator's arm with 2 DDL mounted on a mobile unicycle platform. Simulation tests validate the performance of the proposed approach when external disturbances occur; showing an acceptable performance of the system's stability and validated by exploiting the Lyapunov theory. &nbsp