Proceedings of the Second International Workshop on HyperTransport Research and Applications (WHTRA2011)

Proceedings of the Second International Workshop on HyperTransport Research and Applications (WHTRA2011) which was held Feb. 9th 2011 in Mannheim, Germany. The Second International Workshop for Research on HyperTransport is an international high quality forum for scientists, researches and developers working in the area of HyperTransport. This includes not only developments and research in HyperTransport itself, but also work which is based on or enabled by HyperTransport. HyperTransport (HT) is an interconnection technology which is typically used as system interconnect in modern computer systems, connecting the CPUs among each other and with the I/O bridges. Primarily designed as interconnect between high performance CPUs it provides an extremely low latency, high bandwidth and excellent scalability. The definition of the HTX connector allows the use of HT even for add-in cards. In opposition to other peripheral interconnect technologies like PCI-Express no protocol conversion or intermediate bridging is necessary. HT is a direct connection between device and CPU with minimal latency. Another advantage is the possibility of cache coherent devices. Because of these properties HT is of high interest for high performance I/O like networking and storage, but also for co-processing and acceleration based on ASIC or FPGA technologies. In particular acceleration sees a resurgence of interest today. One reason is the possibility to reduce power consumption by the use of accelerators. In the area of parallel computing the low latency communication allows for fine grain communication schemes and is perfectly suited for scalable systems. Summing up, HT technology offers key advantages and great performance to any research aspect related to or based on interconnects. For more information please consult the workshop website (http://whtra.uni-hd.de)

Proceedings of the First International Workshop on HyperTransport Research and Applications (WHTRA2009)

Proceedings of the First International Workshop on HyperTransport Research and Applications (WHTRA2009) which was held Feb. 12th 2009 in Mannheim, Germany. The 1st International Workshop for Research on HyperTransport is an international high quality forum for scientists, researches and developers working in the area of HyperTransport. This includes not only developments and research in HyperTransport itself, but also work which is based on or enabled by HyperTransport. HyperTransport (HT) is an interconnection technology which is typically used as system interconnect in modern computer systems, connecting the CPUs among each other and with the I/O bridges. Primarily designed as interconnect between high performance CPUs it provides an extremely low latency, high bandwidth and excellent scalability. The definition of the HTX connector allows the use of HT even for add-in cards. In opposition to other peripheral interconnect technologies like PCI-Express no protocol conversion or intermediate bridging is necessary. HT is a direct connection between device and CPU with minimal latency. Another advantage is the possibility of cache coherent devices. Because of these properties HT is of high interest for high performance I/O like networking and storage, but also for co-processing and acceleration based on ASIC or FPGA technologies. In particular acceleration sees a resurgence of interest today. One reason is the possibility to reduce power consumption by the use of accelerators. In the area of parallel computing the low latency communication allows for fine grain communication schemes and is perfectly suited for scalable systems. Summing up, HT technology offers key advantages and great performance to any research aspect related to or based on interconnects. For more information please consult the workshop website (http://whtra.uni-hd.de)

Proceedings of the First International Workshop on HyperTransport Research and Applications (WHTRA2009)(revised 08/2009)

Proceedings of the First International Workshop on HyperTransport Research and Applications (WHTRA2009) which was held Feb. 12th 2009 in Mannheim, Germany. The 1st International Workshop for Research on HyperTransport is an international high quality forum for scientists, researches and developers working in the area of HyperTransport. This includes not only developments and research in HyperTransport itself, but also work which is based on or enabled by HyperTransport. HyperTransport (HT) is an interconnection technology which is typically used as system interconnect in modern computer systems, connecting the CPUs among each other and with the I/O bridges. Primarily designed as interconnect between high performance CPUs it provides an extremely low latency, high bandwidth and excellent scalability. The definition of the HTX connector allows the use of HT even for add-in cards. In opposition to other peripheral interconnect technologies like PCI-Express no protocol conversion or intermediate bridging is necessary. HT is a direct connection between device and CPU with minimal latency. Another advantage is the possibility of cache coherent devices. Because of these properties HT is of high interest for high performance I/O like networking and storage, but also for co-processing and acceleration based on ASIC or FPGA technologies. In particular acceleration sees a resurgence of interest today. One reason is the possibility to reduce power consumption by the use of accelerators. In the area of parallel computing the low latency communication allows for fine grain communication schemes and is perfectly suited for scalable systems. Summing up, HT technology offers key advantages and great performance to any research aspect related to or based on interconnects. For more information please consult the workshop website (http://whtra.uni-hd.de)

A HT3 Platform for Rapid Prototyping and High Performance Reconfigurable Computing

FPGAs as reconfigurable devices play an important role in both rapid prototyping and high performance reconfigurable computing. Usually, FPGA vendors help the users with pre-designed cores, for instance for various communication protocols. However, this is only true for widely used protocols. In the use case described here, the target application may benefit from a tight integration of the FPGA in a computing system. Typical commodity protocols like PCI Express may not fulfill these demands. HyperTransport (HT), on the other hand, allows connecting directly and without intermediate bridges or protocol conversion to a processor interface. As a result, communication costs between the FPGA unit and both processor and main memory are minimal. In this paper we present an HT3 interface for Stratix IV based FPGAs, which allows for minimal latencies and high bandwidths between processor and device and main memory and device. Designs targeting a HT connection can now be prototyped in real world systems. Furthermore, this design can be leveraged for acceleration tasks, with the minimal communication costs allowing fine-grain work deployment and the use of cost-efficient main memory instead of size-limited and costly on-device memory

Firmware and gateway for the ACE1 reconfigurable accelerator card

This thesis describes the continued work on the in-house designed FPGA based co-processor daughtercard referred to as ACE1. The aim: to create an ecosystem incorporating firmware, bootstrapping code, drivers and a development environment to create a seamless environment. Challenges in setting up and debugging the interface that connects the coprocessor daughtercard to the host server include: problems with the power network, the edge connectors and timing problems with the primary protocol which prevented host-based communications. The options include allowing the daughtercard to function in a stand-alone fashion and we present a gateware solution that allows users to select from a number of alternatives for each of the layers in the Open Systems Interconnect networking model

Achieving High Speed CFD simulations: Optimization, Parallelization, and FPGA Acceleration for the unstructured DLR TAU Code

Today, large scale parallel simulations are fundamental tools to handle complex problems. The number of processors in current computation platforms has been recently increased and therefore it is necessary to optimize the application performance and to enhance the scalability of massively-parallel systems. In addition, new heterogeneous architectures, combining conventional processors with specific hardware, like FPGAs, to accelerate the most time consuming functions are considered as a strong alternative to boost the performance. In this paper, the performance of the DLR TAU code is analyzed and optimized. The improvement of the code efficiency is addressed through three key activities: Optimization, parallelization and hardware acceleration. At first, a profiling analysis of the most time-consuming processes of the Reynolds Averaged Navier Stokes flow solver on a three-dimensional unstructured mesh is performed. Then, a study of the code scalability with new partitioning algorithms are tested to show the most suitable partitioning algorithms for the selected applications. Finally, a feasibility study on the application of FPGAs and GPUs for the hardware acceleration of CFD simulations is presented

HyperTransport 3 Core: A Next Generation Host Interface with Extremely High Bandwidth

As the amount of computing power keeps increasing, host interface bandwidth to memory and input-output devices (I/O) becomes a more and more limiting factor. High speed serial host interface protocols like PCI-Express and HyperTransport (HT) have been introduced to satisfy the applications’ ever increasing demands for more bandwidth. Recent applications in the field of General Purpose Graphic Processing Units (GPGPUs) and Field Programmable Gate Array (FPGA) based coprocessors are an example. In this Paper we present a novel implementation of an FPGA based HyperTransport 3 (HT3) host interface. To the best of our knowledge it represents the very first implementation of this type. The design offers an extremely high unidirectional bandwidth of up to 2.3 GByte/s. It can be employed in arbitrary FPGA applications and then offers direct access to an AMD Opteron processor via the HT interface. To allow the development of an optimal design, we perform a complexity and requirements analysis. The result is our proposed solution which has been implemented in synthesizable Hardware Description Language (HDL) code. Microbenchmarks are presented to show the feasibility and high performance of the design

The Potential for a GPU-Like Overlay Architecture for FPGAs

We propose a soft processor programming model and architecture inspired by graphics processing units (GPUs) that are well-matched to the strengths of FPGAs, namely, highly parallel and pipelinable computation. In particular, our soft processor architecture exploits multithreading, vector operations, and predication to supply a floating-point pipeline of 64 stages via hardware support for up to 256 concurrent thread contexts. The key new contributions of our architecture are mechanisms for managing threads and register files that maximize data-level and instruction-level parallelism while overcoming the challenges of port limitations of FPGA block memories as well as memory and pipeline latency. Through simulation of a system that (i) is programmable via NVIDIA's high-level Cg language, (ii) supports AMD's CTM r5xx GPU ISA, and (iii) is realizable on an XtremeData XD1000 FPGA-based accelerator system, we demonstrate the potential for such a system to achieve 100% utilization of a deeply pipelined floating-point datapath

A reconfigurable accelerator card for high performance computing

Includes abstract.Includes bibliographical references (leaves 68-70).This thesis describes the design, implementation, and testing of a reconfigurable accelerator card. The goal of the project was to provide a hardware platform for future students to carry out research into reconfigurable computing. Our accelerator design is an expansion card for a traditional Von Neumann host machine, and contains two field-programmable gate arrays. By inserting the card into a host machine, intrinsically parallel processing tasks can be exported to the FPGAs. This is similar to the way in which video game rendering tasks can be exported to the GFC on a graphics accelerator. We show how an FPGA is a suitable processing element, in terms of performance per watt, for many computing tasks. We set out to design and build a reconfigurable card that harnessed the latest FPGAs and fastest available I/O interfaces. The resultant design is one which can run within a host machine, in an array of host machines, or as a stand-alone processing node

Acceleration Methodology for the Implementation of Scientific Applications on Reconfigurable Hardware

The role of heterogeneous multi-core architectures in the industrial and scientific computing community is expanding. For researchers to increase the performance of complex applications, a multifaceted approach is needed to utilize emerging reconfigurable computing (RC) architectures. First, the method for accelerating applications must provide flexible solutions for fully utilizing key architecture traits across platforms. Secondly, the approach needs to be readily accessible to application scientists. A recent trend toward emerging disruptive architectures is an important signal that fundamental limitations in traditional high performance computing (HPC) are limiting break through research. To respond to these challenges, scientists are under pressure to identify new programming methodologies and elements in platform architectures that will translate into enhanced program efficacy. Reconfigurable computing (RC) allows the implementation of almost any computer architecture trait, but identifying which traits work best for numerous scientific problem domains is difficult. However, by leveraging the existing underlying framework available in field programmable gate arrays (FPGAs), it is possible to build a method for utilizing RC traits for accelerating scientific applications. By contrasting both hardware and software changes, RC platforms afford developers the ability to examine various architecture characteristics to find those best suited for production-level scientific applications. The flexibility afforded by FPGAs allow these characteristics to then be extrapolated to heterogeneous, multi-core and general-purpose computing on graphics processing units (GP-GPU) HPC platforms. Additionally by coupling high-level languages (HLL) with reconfigurable hardware, relevance to a wider industrial and scientific population is achieved. To provide these advancements to the scientific community we examine the acceleration of a scientific application on a RC platform. By leveraging the flexibility provided by FPGAs we develop a methodology that removes computational loads from host systems and internalizes portions of communication with the aim of reducing fiscal costs through the reduction of physical compute nodes required to achieve the same runtime performance. Using this methodology an improvement in application performance is shown to be possible without requiring hand implementation of HLL code in a hardware description language (HDL) A review of recent literature demonstrates the challenge of developing a platform-independent flexible solution that allows access to cutting edge RC hardware for application scientists. To address this challenge we propose a structured methodology that begins with examination of the application\u27s profile, computations, and communications and utilizes tools to assist the developer in making partitioning and optimization decisions. Through experimental results, we will analyze the computational requirements, describe the simulated and actual accelerated application implementation, and finally describe problems encountered during development. Using this proposed method, a 3x speedup is possible over the entire accelerated target application. Lastly we discuss possible future work including further potential optimizations of the application to improve this process and project the anticipated benefits