Adaptive Communications for Next Generation Broadband Wireless Access Systems

Un dels aspectes claus en el disseny i gestió de les xarxes sense fils d'accés de banda ampla és l'ús eficient dels recursos radio. Des del punt de vista de l'operador, l'ample de banda és un bé escàs i preuat que s´ha d'explotar i gestionar de la forma més eficient possible tot garantint la qualitat del servei que es vol proporcionar. Per altra banda, des del punt de vista del usuari, la qualitat del servei ofert ha de ser comparable al de les xarxes fixes, requerint així un baix retard i una baixa pèrdua de paquets per cadascun dels fluxos de dades entre la xarxa i l'usuari. Durant els darrers anys s´han desenvolupat nombroses tècniques i algoritmes amb l'objectiu d'incrementar l'eficiència espectral. Entre aquestes tècniques destaca l'ús de múltiples antenes al transmissor i al receptor amb l'objectiu de transmetre diferents fluxos de dades simultaneament sense necessitat d'augmentar l'ample de banda. Per altra banda, la optimizació conjunta de la capa d'accés al medi i la capa física (fent ús de l'estat del canal per tal de gestionar de manera optima els recursos) també permet incrementar sensiblement l'eficiència espectral del sistema.L'objectiu d'aquesta tesi és l'estudi i desenvolupament de noves tècniques d'adaptació de l'enllaç i gestió dels recursos ràdio aplicades sobre sistemes d'accés ràdio de propera generació (Beyond 3G). Els estudis realitzats parteixen de la premissa que el transmisor coneix (parcialment) l'estat del canal i que la transmissió es realitza fent servir un esquema multiportadora amb múltiples antenes al transmisor i al receptor. En aquesta tesi es presenten dues línies d'investigació, la primera per casos d'una sola antenna a cada banda de l'enllaç, i la segona en cas de múltiples antenes. En el cas d'una sola antena al transmissor i al receptor, un nou esquema d'assignació de recursos ràdio i priorització dels paquets (scheduling) és proposat i analitzat integrant totes dues funcions sobre una mateixa entitat (cross-layer). L'esquema proposat té com a principal característica la seva baixa complexitat i que permet operar amb transmissions multimedia. Alhora, posteriors millores realitzades per l'autor sobre l'esquema proposat han permès també reduir els requeriments de senyalització i combinar de forma óptima usuaris d'alta i baixa mobilitat sobre el mateix accés ràdio, millorant encara més l'eficiència espectral del sistema. En cas d'enllaços amb múltiples antenes es proposa un nou esquema que combina la selecció del conjunt optim d'antenes transmissores amb la selecció de la codificació espai- (frequència-) temps. Finalment es donen una sèrie de recomanacions per tal de combinar totes dues línies d'investigació, així con un estat de l'art de les tècniques proposades per altres autors que combinen en part la gestió dels recursos ràdio i els esquemes de transmissió amb múltiples antenes.Uno de los aspectos claves en el diseño y gestión de las redes inalámbricas de banda ancha es el uso eficiente de los recursos radio. Desde el punto de vista del operador, el ancho de banda es un bien escaso y valioso que se debe explotar y gestionar de la forma más eficiente posible sin afectar a la calidad del servicio ofrecido. Por otro lado, desde el punto de vista del usuario, la calidad del servicio ha de ser comparable al ofrecido por las redes fijas, requiriendo así un bajo retardo y una baja tasa de perdida de paquetes para cada uno de los flujos de datos entre la red y el usuario. Durante los últimos años el número de técnicas y algoritmos que tratan de incrementar la eficiencia espectral en dichas redes es bastante amplio. Entre estas técnicas destaca el uso de múltiples antenas en el transmisor y en el receptor con el objetivo de poder transmitir simultáneamente diferentes flujos de datos sin necesidad de incrementar el ancho de banda. Por otro lado, la optimización conjunta de la capa de acceso al medio y la capa física (utilizando información de estado del canal para gestionar de manera óptima los recursos) también permite incrementar sensiblemente la eficiencia espectral del sistema.El objetivo de esta tesis es el estudio y desarrollo de nuevas técnicas de adaptación del enlace y la gestión de los recursos radio, y su posterior aplicación sobre los sistemas de acceso radio de próxima generación (Beyond 3G). Los estudios realizados parten de la premisa de que el transmisor conoce (parcialmente) el estado del canal a la vez que se considera que la transmisión se realiza sobre un sistema de transmisión multiportadora con múltiple antenas en el transmisor y el receptor. La tesis se centra sobre dos líneas de investigación, la primera para casos de una única antena en cada lado del enlace, y la segunda en caso de múltiples antenas en cada lado. Para el caso de una única antena en el transmisor y en el receptor, se ha desarrollado un nuevo esquema de asignación de los recursos radio así como de priorización de los paquetes de datos (scheduling) integrando ambas funciones sobre una misma entidad (cross-layer). El esquema propuesto tiene como principal característica su bajo coste computacional a la vez que se puede aplicar en caso de transmisiones multimedia. Posteriores mejoras realizadas por el autor sobre el esquema propuesto han permitido también reducir los requisitos de señalización así como combinar de forma óptima usuarios de alta y baja movilidad. Por otro lado, en caso de enlaces con múltiples antenas en transmisión y recepción, se presenta un nuevo esquema de adaptación en el cual se combina la selección de la(s) antena(s) transmisora(s) con la selección del esquema de codificación espacio-(frecuencia-) tiempo. Para finalizar, se dan una serie de recomendaciones con el objetivo de combinar ambas líneas de investigación, así como un estado del arte de las técnicas propuestas por otros autores que combinan en parte la gestión de los recursos radio y los esquemas de transmisión con múltiples antenas.In Broadband Wireless Access systems the efficient use of the resources is crucial from many points of views. From the operator point of view, the bandwidth is a scarce, valuable, and expensive resource which must be exploited in an efficient manner while the Quality of Service (QoS) provided to the users is guaranteed. On the other hand, a tight delay and link quality constraints are imposed on each data flow hence the user experiences the same quality as in fixed networks. During the last few years many techniques have been developed in order to increase the spectral efficiency and the throughput. Among them, the use of multiple antennas at the transmitter and the receiver (exploiting spatial multiplexing) with the joint optimization of the medium access control layer and the physical layer parameters.In this Ph.D. thesis, different adaptive techniques for B3G multicarrier wireless systems are developed and proposed focusing on the SS-MC-MA and the OFDM(A) (IEEE 802.16a/e/m standards) communication schemes. The research lines emphasize into the adaptation of the transmission having (Partial) knowledge of the Channel State Information for both; single antenna and multiple antenna links. For single antenna links, the implementation of a joint resource allocation and scheduling strategy by including adaptive modulation and coding is investigated. A low complexity resource allocation and scheduling algorithm is proposed with the objective to cope with real- and/or non-real- time requirements and constraints. A special attention is also devoted in reducing the required signalling. However, for multiple antenna links, the performance of a proposed adaptive transmit antenna selection scheme jointly with space-time block coding selection is investigated and compared with conventional structures. In this research line, mainly two optimizations criteria are proposed for spatial link adaptation, one based on the minimum error rate for fixed throughput, and the second focused on the maximisation of the rate for fixed error rate. Finally, some indications are given on how to include the spatial adaptation into the investigated and proposed resource allocation and scheduling process developed for single antenna transmission

Iterative multiuser receivers for coded DS-CDMA systems

The introduction of cellular wireless systems in the 1980s has resulted in a continuous and growing demand for personal communication services. This demand has made larger capacity systems necessary. With the interest from both the research community and industry in wireless code-division multiple-access (CDMA) systems, the application of multiuser detection (MUD) techniques to wireless systems is becoming increasingly important. MUD is an important area of interest to help obtain the significant increase in capacity needed for future wireless services. The standardisation of direct-sequence CDMA (DS-CDMA) systems in the third generation of mobile communication systems has raised even more interest in exploiting the capabilities and capacity of this type of technology. However, the conventional DS-CDMA system has the major problem of multiple-access interference (MAI). The MAI is unavoidable because receivers deal with information which is transmitted not by a single source but by several uncoordinated and geographically separated sources. As a result, the capacity of these systems is inherently interference limited by other users. To overcome these limitations, MUD emerges as a promising approach to increase the system capacity. This thesis addresses the problem of improving the downlink capacity of a coded DS-CDMA system with the use of MUD techniques at the mobile terminal receiver. The optimum multiuser receiver scheme is far too computational intensive for practical use. Therefore, the aim of this thesis is to investigate sub-optimal multiuser receiver schemes that can exploit the advantages of MUD but also simplify its implementation. The attention is primarily focused on iterative MUD receiver schemes which apply the turbo multiuser detection principle. Essentially this principle consists of an iterative exchange of extrinsic information among the receiver modules to achieve improved performance. In this thesis, the implementation of an iterative receiver based on a linear MUD technique and a cancellation scheme over an additive white Gaussian noise (AWGN) channel is first proposed and analysed. The interference analysis shows that good performance is achieved using a lowcomplexity receiver structure. In more realistic mobile channels, however, this type of receiver suffers from the presence of higher levels of interference resulting in poor receiver performance. The reason for this is that in such scenarios the desired signals are no longer linearly separable. Therefore, non-linear detection techniques are required to provide better performance. With this purpose, a hybrid iterative multiuser receiver is investigated for the case of a stationary multipath channel. The incorporation of antenna arrays is an effective and practical technique to provide a significant capacity gain over conventional single-antenna systems. In this context, a novel space-time iterative multiuser receiver is proposed which achieves a large improvement in spectral efficiency and performance over multipath fading channels. In addition, it is shown that this architecture can be implemented without a prohibitive complexity cost. The exploitation of the iterative principle can be used to approach the capacity bounds of a coded DS-CDMA system. Using the Shannon’s sphere packing bound, a comparison is presented to illustrate how closely a practical system can approach the theoretical limits of system performance

Opportunistic Routing with Network Coding in Powerline Communications

Opportunistic Routing (OR) can be used as an alternative to the legacy routing (LR) protocols in networks with a broadcast lossy channel and possibility of overhearing the signal. The power line medium creates such an environment. OR can better exploit the channel than LR because it allows the cooperation of all nodes that receive any data. With LR, only a chain of nodes is selected for communication. Other nodes drop the received information. We investigate OR for the one-source one-destination scenario with one traffic flow. First, we evaluate the upper bound on the achievable data rate and advocate the decentralized algorithm for its calculation. This knowledge is used in the design of Basic Routing Rules (BRR). They use the link quality metric that equals the upper bound on the achievable data rate between the given node and the destination. We call it the node priority. It considers the possibility of multi-path communication and the packet loss correlation. BRR allows achieving the optimal data rate pertaining certain theoretical assumptions. The Extended BRR (BRR-E) are free of them. The major difference between BRR and BRR-E lies in the usage of Network Coding (NC) for prognosis of the feedback. In this way, the protocol overhead can be severely reduced. We also study Automatic Repeat-reQuest (ARQ) mechanism that is applicable with OR. It differs to ARQ with LR in that each sender has several sinks and none of the sinks except destination require the full recovery of the original message. Using BRR-E, ARQ and other services like network initialization and link state control, we design the Advanced Network Coding based Opportunistic Routing protocol (ANChOR). With the analytic and simulation results we demonstrate the near optimum performance of ANChOR. For the triangular topology, the achievable data rate is just 2% away from the theoretical maximum and it is up to 90% higher than it is possible to achieve with LR. Using the G.hn standard, we also show the full protocol stack simulation results (including IP/UDP and realistic channel model). In this simulation we revealed that the gain of OR to LR can be even more increased by reducing the head-of-the-line problem in ARQ. Even considering the ANChOR overhead through additional headers and feedbacks, it outperforms the original G.hn setup in data rate up to 40% and in latency up to 60%.:1 Introduction 2 1.1 Intra-flow Network Coding 6 1.2 Random Linear Network Coding (RLNC) 7 2 Performance Limits of Routing Protocols in PowerLine Communications (PLC) 13 2.1 System model 14 2.2 Channel model 14 2.3 Upper bound on the achievable data rate 16 2.4 Achieving the upper bound data rate 17 2.5 Potential gain of Opportunistic Routing Protocol (ORP) over Common Single-path Routing Protocol (CSPR) 19 2.6 Evaluation of ORP potential 19 3 Opportunistic Routing: Realizations and Challenges 24 3.1 Vertex priority and cooperation group 26 3.2 Transmission policy in idealized network 34 3.2.1 Basic Routing Rules (BRR) 36 3.3 Transmission policy in real network 40 3.3.1 Purpose of Network Coding (NC) in ORP 41 3.3.2 Extended Basic Routing Rules (BRR) (BRR-E) 43 3.4 Automatic ReQuest reply (ARQ) 50 3.4.1 Retransmission request message contents 51 3.4.2 Retransmission Request (RR) origination and forwarding 66 3.4.3 Retransmission response 67 3.5 Congestion control 68 3.5.1 Congestion control in our work 70 3.6 Network initialization 74 3.7 Formation of the cooperation groups (coalitions) 76 3.8 Advanced Network Coding based Opportunistic Routing protocol (ANChOR) header 77 3.9 Communication of protocol information 77 3.10 ANChOR simulation . .79 3.10.1 ANChOR information in real time .80 3.10.2 Selection of the coding rate 87 3.10.3 Routing Protocol Information (RPI) broadcasting frequency 89 3.10.4 RR contents 91 3.10.5 Selection of RR forwarder 92 3.10.6 ANChOR stability 92 3.11 Summary 95 4 ANChOR in the Gigabit Home Network (G.hn) Protocol 97 4.1 Compatibility with the PLC protocol stack 99 4.2 Channel and noise model 101 4.2.1 In-home scenario 102 4.2.2 Access network scenario 102 4.3 Physical layer (PHY) layer implementation 102 4.3.1 Bit Allocation Algorithm (BAA) 103 4.4 Multiple Access Control layer (MAC) layer 109 4.5 Logical Link Control layer (LLC) layer 111 4.5.1 Reference Automatic Repeat reQuest (ARQ) 111 4.5.2 Hybrid Automatic Repeat reQuest (HARQ) in ANChOR 114 4.5.3 Modeling Protocol Data Unit (PDU) erasures on LLC 116 4.6 Summary 117 5 Study of G.hn with ANChOR 119 5.1 ARQ analysis 119 5.2 Medium and PHY requirements for “good” cooperation 125 5.3 Access network scenario 128 5.4 In-home scenario 135 5.4.1 Modeling packet erasures 136 5.4.2 Linear Dependence Ratio (LDR) 139 5.4.3 Worst case scenario 143 5.4.4 Analysis of in-home topologies 145 6 Conclusions . . . . . . . . . . . . . . . 154 A Proof of the neccessity of the exclusion rule 160 B Gain of ORPs to CSRPs 163 C Broadcasting rule 165 D Proof of optimality of BRR for triangular topology 167 E Reducing the retransmission probability 168 F Calculation of Expected Average number of transmissions (EAX) for topologies with bi-directional links 170 G Feedback overhead of full coding matrices 174 H Block diagram of G.hn physical layer in ns-3 model 175 I PER to BER mapping 17

Virtual Runtime Application Partitions for Resource Management in Massively Parallel Architectures

This thesis presents a novel design paradigm, called Virtual Runtime Application Partitions (VRAP), to judiciously utilize the on-chip resources. As the dark silicon era approaches, where the power considerations will allow only a fraction chip to be powered on, judicious resource management will become a key consideration in future designs. Most of the works on resource management treat only the physical components (i.e. computation, communication, and memory blocks) as resources and manipulate the component to application mapping to optimize various parameters (e.g. energy efficiency). To further enhance the optimization potential, in addition to the physical resources we propose to manipulate abstract resources (i.e. voltage/frequency operating point, the fault-tolerance strength, the degree of parallelism, and the configuration architecture). The proposed framework (i.e. VRAP) encapsulates methods, algorithms, and hardware blocks to provide each application with the abstract resources tailored to its needs. To test the efficacy of this concept, we have developed three distinct self adaptive environments: (i) Private Operating Environment (POE), (ii) Private Reliability Environment (PRE), and (iii) Private Configuration Environment (PCE) that collectively ensure that each application meets its deadlines using minimal platform resources. In this work several novel architectural enhancements, algorithms and policies are presented to realize the virtual runtime application partitions efficiently. Considering the future design trends, we have chosen Coarse Grained Reconfigurable Architectures (CGRAs) and Network on Chips (NoCs) to test the feasibility of our approach. Specifically, we have chosen Dynamically Reconfigurable Resource Array (DRRA) and McNoC as the representative CGRA and NoC platforms. The proposed techniques are compared and evaluated using a variety of quantitative experiments. Synthesis and simulation results demonstrate VRAP significantly enhances the energy and power efficiency compared to state of the art.Siirretty Doriast

Recent Trends in Communication Networks

In recent years there has been many developments in communication technology. This has greatly enhanced the computing power of small handheld resource-constrained mobile devices. Different generations of communication technology have evolved. This had led to new research for communication of large volumes of data in different transmission media and the design of different communication protocols. Another direction of research concerns the secure and error-free communication between the sender and receiver despite the risk of the presence of an eavesdropper. For the communication requirement of a huge amount of multimedia streaming data, a lot of research has been carried out in the design of proper overlay networks. The book addresses new research techniques that have evolved to handle these challenges

Algorithms for Energy Efficiency in Wireless Sensor Networks

The recent advances in microsensor and semiconductor technology have opened a new field within computer science: the networking of small-sized sensors which are capable of sensing, processing, and communicating. Such wireless sensor networks offer new applications in the areas of habitat and environment monitoring, disaster control and operation, military and intelligence control, object tracking, video surveillance, traffic control, as well as in health care and home automation. It is likely that the deployed sensors will be battery-powered, which will limit the energy capacity significantly. Thus, energy efficiency becomes one of the main challenges that need to be taken into account, and the design of energy-efficient algorithms is a major contribution of this thesis. As the wireless communication in the network is one of the main energy consumers, we first consider in detail the characteristics of wireless communication. By using the embedded sensor board (ESB) platform recently developed by the Free University of Berlin, we analyze the means of forward error correction and propose an appropriate resync mechanism, which improves the communication between two ESB nodes substantially. Afterwards, we focus on the forwarding of data packets through the network. We present the algorithms energy-efficient forwarding (EEF), lifetime-efficient forwarding (LEF), and energy-efficient aggregation forwarding (EEAF). While EEF is designed to maximize the number of data bytes delivered per energy unit, LEF additionally takes into account the residual energy of forwarding nodes. In so doing, LEF further prolongs the lifetime of the network. Energy savings due to data aggregation and in-network processing are exploited by EEAF. Besides single-link forwarding, in which data packets are sent to only one forwarding node, we also study the impact of multi-link forwarding, which exploits the broadcast characteristics of the wireless medium by sending packets to several (potential) forwarding nodes. By actively selecting a forwarder among all nodes that received a packet successfully, retransmissions can often be avoided. In the majority of cases, multi-link forwarding is thus more efficient and able to save energy. In the last part of this thesis, we present a topology and energy control algorithm (TECA) to turn off the nodes' radio transceivers completely in order to avoid idle listening. By means of TECA, a connected backbone of active nodes is established, while all other nodes may sleep and save energy by turning off their radios. All algorithms presented in this thesis have been fully analyzed, simulated, and implemented on the ESB platform. They are suitable for several applications scenarios and can easily be adapted even to other wireless sensor platforms

Computer-network Solutions for Pervasive Computing

Lo scenario delle reti di comunicazione di tipo wireless sta rapidamente evolvendo verso i sistemi pervasivi in cui i dispositivi wireless, di diversi tipi e grandezze, costituiscono parte integrante dell’ambiente in cui sono immersi, ed interagiscono continuamente ed in maniera trasparente con gli utenti che vi vivono o che lo attraversano. Si parla a tal proposito anche di ambienti intelligenti. Seguendo l’evoluzione dai sistemi mobili a quelli pervasivi, questa tesi rivisita diversi tipi di ambienti wireless che si sono sviluppati e diffusi negli ultimi 20 anni: a partire dalle wireless LANs, proseguendo con le reti ad hoc, per finire con le reti opportunistiche. Sebbene molte problematiche delle reti wireless si ripropongano in quasi tutti gli scenari (ad esempio il risparmio energetico), a scenari wireless diversi corrispondono in genere utilizzi differenti e diversi fabbisogni degli utenti, come pure problemi specifici che richiedono soluzioni dedicate. Alcune soluzioni specifiche sono analizzate e proposte in questa tesi. Le reti WLANs basate su infrastruttura sono usate generalmente per fornire accesso alla rete Internet ed infatti lo scenario che le comprende è solitamente riferito come Wireless Internet. Nonostante la presenza dell’infrastruttuta fissa garantisca in generale una trasmissione di dati affidabile, l’utilizzo di questo tipo di reti per fornire esattamente gli stessi tipi di servizi delle reti fisse provoca un elevato consumo di risorse che all’interno delle WLANs sono invece limitate. Inoltre l’utilizzo dei protocolli dello stack TCP/IP sui link wireless è di solito fonte di inefficienze viste le profonde differenze esistenti fra i link wireless e quelli fissi. La progettazione di servizi in uno scenario di wireless Internet ha come primario obiettivo quello di garantire la fruizione da parte degli utenti mobili senza soluzione di continuità, mascherando così la presenza del link wireless che ha banda nominale inferiore rispetto ai link fissi ed è soggetto a maggiori perdite, e supportando la mobilità degli utenti all’interno delle zone di copertura (handoff). La gestione dei servizi di wireless Internet deve sempre essere integrata con soluzioni di risparmio energetico tese ad allungare il più possibile l’autonomia energetica dei dispositivi degli utenti (alimentati a batteria) garantendo così loro un servizio duraturo nel tempo. Abbiamo studiato una soluzione per servizi di streaming audio-video verso terminali mobili in un ambiente di wireless LAN. Oltre a garantire la continuità della riproduzione multimediale con buona qualità, questa soluzione ottimizza il consumo energetico del terminale wireless agendo sulla scheda di rete wireless. Durante lo streaming infatti, la scheda di rete viene periodicamente messa in uno stato a basso consumo energetico (sleep). I periodi di sleep della scheda vengono calcolati adattivamente in funzione dello stato di avanzamento della riproduzione multimediale e della banda disponibile istantaneamente sul canale wireless opportunamente monitorato. Il riposo della scheda di rete non incide sul processo di riproduzione e quindi sulla qualità del servizio percepita dall’utente mobile. A differenza delle WLANs, le reti MANETs sono prive di infrastruttura fissa ed i nodi che vi partecipano si autoconfigurano ed autoorganizzano tra di loro. Le MANETs si mostrano particolarmente adatte ad esigenze temporanee di gruppi di utenti che vogliano condividere dati, scambiarsi messaggi, o altro. Uno dei principali interessi di ricerca nell’ambito delle reti MANETs ha riguardato storicamente lo studio dei protocolli di routing per l’instradamento delle informazioni fra nodi sorgente e nodi destinatari. In una rete MANET infatti, vista l’assenza di infrastruttura, ogni nodo è coinvolto nella funzione di instradamento. Negli ultimi anni tuttavia, un nuovo aspetto di ricerca sta acquistando sempre maggiore attenzione e riguarda la sperimentazione su testbed reali. Le poche esperienze sperimentali eseguite su MANETs hanno dimostrato l’inadeguatezza degli studi di tipo analitico-simulativo nel giudicare l’efficacia delle soluzioni progettate per reti MANETs. Questo è principalmente dovuto al fatto che gli scenari wireless sono estremamente complessi e soggetti a fenomeni di diversa natura che influiscono sulle comunicazioni ma che sono difficilmente condensabili in un modello analitico completo. I modelli esistenti nei simulatori attualmente diffusi sono spesso causa di errori nel validare o al contrario bocciare le soluzioni ed i protocolli testati. Le attività di sperimentazione su testbed reali hanno dunque un duplice scopo: i) validare protocolli e soluzioni proposte attualmente, e ii) gettare le basi per la costruizione di nuovi modelli analitici e simulativi che siano maggiormente attendibili di quelli attuali. L’esperienza condotta su di un testbed reale per reti ad hoc comprendente portatili e palmari fino ad un totale di 12 nodi, ha dimostrato l’efficacia delle implementazioni di due protocolli di routing: AODV (Ad hoc On demand Distance Vector) ed OLSR (Optimized Link State Routing). Tuttavia, benchè entrambi siano funzionalmente corretti, mostrano comportamenti differenti quando usati per supportare servizi di livello middleware ed applicativi (vedi ad esempio file sharing o trasferimenti ftp). In particolare, i ritardi causati dalla scoperta delle rotte in AODV sono spesso causa di inefficienze o addirittura di interruzione del servizio. OLSR invece, seppure responsabile di un overhead di traffico maggiore, si mostra maggiormente adatto alle interazioni con i servizi dei livelli superiori. Infine, l’esperienza ha dimostrato la necessità di ripensare molti dei servizi disponibili su rete fissa per adeguarli alle caratteristiche delle reti wireless e particolarmente di quelle ad hoc. Una nuova tipologia di reti wireless sta emergendo attualmente e si sta rivelando di particolare interesse: quella delle reti opportunistiche. Le reti opportunistiche non si appoggiano su alcuna infrastruttura fissa, né cercano di autoconfigurarsi in una infrastruttura wireless temporanea costituita da nodi vicini. Sfruttano le opportunità di contatto che si verificano fra i nodi (dispositivi wireless di piccola taglia) trasportati dagli utenti nelle loro attività quotidiane (ad esempio a lavoro, sugli autobus, a scuola o all’università, ecc.). I messaggi sono scambiati ogni qualvolta si renda possibile, ovunque sia possibile ed il successo della loro trasmissione è strettamente legato alle dinamiche sociali in cui sono coinvolti gli utenti che trasportano i dispositivi ed alla storia degli incontri tra individui. Data la mobilità estremamente elevata che caratterizza questo nuovo scenario di reti, e la nota rumorosità delle comunicazioni wireless, l’affidabilità delle trasmissioni emerge come uno dei fattori di principale interesse. Infatti, le comunicazioni possono aver luogo soltanto durante i periodi di contatto tra i nodi e devono essere estremamente veloci ed efficaci. Questo porta a dover fare uno sforzo di progettazione per nuovi protocolli di comunicazione che si diversifichino da quelli oggi più diffusi e basati sulla ritrasmissione dei dati mancanti. Le ritrasmissioni infatti, nella maggior parte dei casi potrebbero non poter essere eseguite per mancanza di tempo. Una strategia valida per gestire l’affidabilità delle comunicazioni opportunistiche in simili scenari estremi (caratterizzati cioè da scarse risorse e scarsa connettività) prevede l’utilizzo combinato di tecniche di codifica dei dati e strategie di instradamento di tipo epidemico. Questo approccio sfrutta la ridondanza sia delle informazioni, sia dei percorsi. La ridondanza delle informazioni dà robustezza a fronte della perdita dei dati in rete poiché è necessario che soltanto un sottoinsieme dei codici generati arrivi a destinazione per consentire al ricostruzione corretta delle informazioni. La ridondanza dei percorsi invece è necessaria poichè non è possibile predirre in anticipo la sequenza dei contatti che può portare i dati a destinazione e pertanto è necessario distribuire l’informazione in più direzioni. Le reti opportunistiche caratterizzate dalla presenza di dispositivi con limitata autonomia energetica e risorse limitate, offrono attualmente lo scenario che meglio traduce il concetto di sistemi pervasivi. Di particolare interesse è il caso delle reti di sensori sparse in cui i sensori sono disposti nell’ambiente con funzione di monitoraggio ed i dati che collezionano vengono raccolti da degli agenti mobili che passano nelle vicinanze e che sono noti come data MULEs. I data MULEs possono utilizzare le informazioni acquisite dai sensori per eseguire applicazioni dipendenti dal contesto o possono semplicemente inoltrarle fino a quando raggiungono l’infrastruttura dove vengono elaborati e memorizzati. Le interazioni fra i sensori immersi nell’ambiente ed i data MULEs sono soltanto un primo passo di un sistema di comunicazione globale completamente opportunistico in cui i data MULEs scambiano l’un l’altro le informazioni che trasportano fino a quando infine, i dati pervengono alle destinazioni più lontane. In questo scenario, le comunicazioni wireless completano naturalmente le interazioni fra gli utenti e si verificano ogni qualvolta gli utenti si incontrano oppure si avvicinano casualmente l’un l’altro, dovunque questa interazione avvenga. Per supportare un simile framework, è necessario sviluppare nuovi paradigmi di comunicazione che tengano in considerazione l’assenza di link stabili tra i nodi che comunicano (connettività intermittente) e che assumano quindi la disponibilità di brevi periodi di contatto per comunicare. Inoltre i nuovi paradigmi di comunicazione devono generalmente assumere l’assenza di un percorso completo fra i nodi sorgente e destinatario e sfruttare invece forme di instradamento delle informazioni che sono simili al modo in cui avvengono le interazioni sociali fra le persone. Strategie di instradamento basate su codifica dei dati offrono una valida soluzione per supportare il framework emergente dei sistemi pervasivi

Signal optimization for Galileo evolution

Global Navigation Satellite System (GNSS) are present in our daily lives. Moreover, new users areemerging with further operation needs involving a constant evolution of the current navigationsystems. In the current framework of Galileo (GNSS European system) and especially within theGalileo E1 Open Service (OS), adding a new acquisition aiding signal could contribute to providehigher resilience at the acquisition phase, as well as to reduce the time to first fix (TTFF).Designing a new GNSS signal is always a trade-off between several performance figures of merit.The most relevant are the position accuracy, the sensitivity and the TTFF. However, if oneconsiders that the signal acquisition phase is the goal to design, the sensitivity and the TTFF havea higher relevance. Considering that, in this thesis it is presented the joint design of a GNSS signaland the message structure to propose a new Galileo 2nd generation signal, which provides ahigher sensitivity in the receiver and reduce the TTFF. Several aspects have been addressed inorder to design a new signal component. Firstly, the spreading modulation definition must considerthe radio frequency compatibility in order to cause acceptable level of interference inside the band.Moreover, the spreading modulation should provide good correlation properties and goodresistance against the multipath in order to enhance the receiver sensitivity and to reduce theTTFF. Secondly, the choice of the new PRN code is also crucial in order to ease the acquisitionphase. A simple model criterion based on a weighted cost function is used to evaluate the PRNcodes performance. This weighted cost function takes into account different figures of merit suchas the autocorrelation, the cross-correlation and the power spectral density. Thirdly, the design ofthe channel coding scheme is always connected with the structure of the message. A joint designbetween the message structure and the channel coding scheme can provide both, reducing theTTFF and an enhancement of the resilience of the decoded data. In this this, a new method to codesign the message structure and the channel coding scheme for the new G2G signal isproposed. This method provides the guideline to design a message structure whose the channelcoding scheme is characterized by the full diversity, the Maximum Distance Separable (MDS) andthe rate compatible properties. The channel coding is essential in order to enhance the datademodulation performance, especially in harsh environments. However, this process can be verysensitive to the correct computation of the decoder input. Significant improvements were obtainedby considering soft inputs channel decoders, through the Log Likelihood Ratio LLRs computation.However, the complete knowledge of the channel state information (CSI) was usually considered,which it is infrequently in real scenarios. In this thesis, we provide new methods to compute LLRlinear approximations, under the jamming and the block fading channels, considering somestatistical CSI. Finally, to transmit a new signal in the same carrier frequency and using the sameHigh Power Amplifier (HPA) generates constraints in the multiplexing design, since a constant orquasi constant envelope is needed in order to decrease the non-linear distortions. Moreover, themultiplexing design should provide high power efficiency to not waste the transmitted satellitepower. Considering the precedent, in this thesis, we evaluate different multiplexing methods,which search to integrate a new binary signal in the Galileo E1 band while enhancing thetransmitted power efficiency. Besides that, even if the work is focused on the Galileo E1, many ofthe concepts and methodologies can be easily extended to any GNSS signa

Resource allocation for cooperative broadcasting in W-CDMA networks

Imperial Users onl