A Survey of Positioning Systems Using Visible LED Lights

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe

Cooperative and Distributed Localization for Wireless Sensor Networks in Multipath Environments

We consider the problem of sensor localization in a wireless network in a multipath environment, where time and angle of arrival information are available at each sensor. We propose a distributed algorithm based on belief propagation, which allows sensors to cooperatively self-localize with respect to one single anchor in a multihop network. The algorithm has low overhead and is scalable. Simulations show that although the network is loopy, the proposed algorithm converges, and achieves good localization accuracy

Opportunistic Localization Scheme Based on Linear Matrix Inequality

Enabling self-localization of mobile nodes is an important problem that has been widely studied in the literature. The general conclusions is that an accurate localization requires either sophisticated hardware (GPS, UWB, ultrasounds transceiver) or a dedicated infrastructure (GSM, WLAN). In this paper we tackle the problem from a different and rather new perspective: we investigate how localization performance can be improved by means of a cooperative and opportunistic data exchange among the nodes. We consider a target node, completely unaware of its own position, and a number of mobile nodes with some self-localization capabilities. When the opportunity occurs, the target node can exchange data with in-range mobile nodes. This opportunistic data exchange is then used by the target node to refine its position estimate by using a technique based on Linear Matrix Inequalities and barycentric algorithm. To investigate the performance of such an opportunistic localization algorithm, we define a simple mathematical model that describes the opportunistic interactions and, then, we run several computer simulations for analyzing the effect of the nodes duty-cycle and of the native self-localization error modeling considered. The results show that the opportunistic interactions can actually improve the self-localization accuracy of a strayed node in many different scenarios

Jumps: Enhancing hop-count positioning in sensor networks using multiple coordinates

Positioning systems in self-organizing networks generally rely on measurements such as delay and received signal strength, which may be difficult to obtain and often require dedicated equipment. An alternative to such approaches is to use simple connectivity information, that is, the presence or absence of a link between any pair of nodes, and to extend it to hop-counts, in order to obtain an approximate coordinate system. Such an approximation is sufficient for a large number of applications, such as routing. In this paper, we propose Jumps, a positioning system for those self-organizing networks in which other types of (exact) positioning systems cannot be used or are deemed to be too costly. Jumps builds a multiple coordinate system based solely on nodes neighborhood knowledge. Jumps is interesting in the context of wireless sensor networks, as it neither requires additional embedded equipment nor relies on any nodes capabilities. While other approaches use only three hop-count measurements to infer the position of a node, Jumps uses an arbitrary number. We observe that an increase in the number of measurements leads to an improvement in the localization process, without requiring a high dense environment. We show through simulations that Jumps, when compared with existing approaches, reduces the number of nodes sharing the same coordinates, which paves the way for functions such as position-based routing

Locating sensors with fuzzy logic algorithms

In a system formed by hundreds of sensors deployed in a huge area it is important to know the position where every sensor is. This information can be obtained using several methods. However, if the number of sensors is high and the deployment is based on ad-hoc manner, some auto-locating techniques must be implemented. In this paper we describe a novel algorithm based on fuzzy logic with the objective of estimating the location of sensors according to the knowledge of the position of some reference nodes. This algorithm, called LIS (Localization based on Intelligent Sensors) is executed distributively along a wireless sensor network formed by hundreds of nodes, covering a huge area. The evaluation of LIS is led by simulation tests. The result obtained shows that LIS is a promising method that can easily solve the problem of knowing where the sensors are located.Junta de Andalucía P07-TIC-0247

An opportunistic indoors positioning scheme based on estimated positions

The localization requirements for mobile nodes in wireless (sensor) networks are increasing. However, most research works are based on range measurements between nodes which are often oversensitive to the measurement error. In this paper we propose a location estimation scheme based on moving nodes that opportunistically exchange known positions. The user couples a linear matrix inequality (LMI) method with a barycenter computation to estimate its position. Simulations have shown that the accuracy of the estimation increases when the number of known positions increases, the radio range decreases and the node speeds increase. The proposed method only depends on a maximum RSS threshold to take into account a known position, which makes it robust and easy to implement. To obtain an accuracy of 1 meter, a user may have to wait at the same position for 5 minutes, with 8 pedestrians moving within range on average

A hybrid indoor localization solution using a generic architectural framework for sparse distributed wireless sensor networks

Indoor localization and navigation using wireless sensor networks is still a big challenge if expensive sensor nodes are not involved. Previous research has shown that in a sparse distributed sensor network the error distance is way too high. Even room accuracy can not be guaranteed. In this paper, an easy-to-use generic positioning framework is proposed, which allows users to plug in a single or multiple positioning algorithms. We illustrate the usability of the framework by discussing a new hybrid positioning solution. The combination of a weighted (range-based) and proximity (range-free) algorithm is made. Roth solutions separately have an average error distance of 13.5m and 2.5m respectively. The latter result is quite accurate due to the fact that our testbeds are not sparse distributed. Our hybrid algorithm has an average error distance of 2.66m only using a selected set of nodes, simulating a sparse distributed sensor network. All our experiments have been executed in the iMinds testbed: namely at "de Zuiderpoort". These algorithms are also deployed in two real-life environments: "De Vooruit" and "De Vijvers"

Group behavior impact on an opportunistic localization scheme

In this paper we tackled the localization problem from an opportunistic perspective, according to which a node can infer its own spatial position by exchanging data with passing by nodes, called peers. We consider an opportunistic localization algorithm based on the linear matrix inequality (LMI) method coupled with a weighted barycenter algorithm. This scheme has been previously analyzed in scenarios with random deployment of peers, proving its effectiveness. In this paper, we extend the analysis by considering more realistic mobility models for peer nodes. More specifically, we consider two mobility models, namely the Group Random Waypoint Mobility Model and the Group Random Pedestrian Mobility Model, which is an improvement of the first one. Hence, we analyze by simulation the opportunistic localization algorithm for both the models, in order to gain insights on the impact of nodes mobility pattern onto the localization performance. The simulation results show that the mobility model has non-negligible effect on the final localization error, though the performance of the opportunistic localization scheme remains acceptable in all the considered scenarios