Earth resources: A continuing bibliography with indexes (issue 60)

This bibliography lists 485 reports, articles, and other documents introduced into the NASA scientific and technical information system between October 1 and December 31, 1988. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, oceanography and marine resources, hydrology and water management, data processing and distribution systems, and instrumentation and sensors

Earth Resources: A continuing bibliography with indexes, issue 36

This bibliography lists 576 reports, articles, and other documents introduced into the NASA Scientific and Technical Information System between October 1 and December 31, 1982. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, hydrology and water management, data processing and distribution systems, instrumentation and sensors, and economic analysis

Biomass Representation in Synthetic Aperture Radar Interferometry Data Sets

This work makes an attempt to explain the origin, features and potential applications of the elevation bias of the synthetic aperture radar interferometry (InSAR) datasets over areas covered by vegetation. The rapid development of radar-based remote sensing methods, such as synthetic aperture radar (SAR) and InSAR, has provided an alternative to the photogrammetry and LiDAR for determining the third dimension of topographic surfaces. The InSAR method has proved to be so effective and productive that it allowed, within eleven days of the space shuttle mission, for acquisition of data to develop a three-dimensional model of almost the entire land surface of our planet. This mission is known as the Shuttle Radar Topography Mission (SRTM). Scientists across the geosciences were able to access the great benefits of uniformity, high resolution and the most precise digital elevation model (DEM) of the Earth like never before for their a wide variety of scientific and practical inquiries. Unfortunately, InSAR elevations misrepresent the surface of the Earth in places where there is substantial vegetation cover. This is a systematic error of unknown, yet limited (by the vertical extension of vegetation) magnitude. Up to now, only a limited number of attempts to model this error source have been made. However, none offer a robust remedy, but rather partial or case-based solutions. More work in this area of research is needed as the number of airborne and space-based InSAR elevation models has been steadily increasing over the last few years, despite strong competition from LiDAR and optical methods. From another perspective, however, this elevation bias, termed here as the “biomass impenetrability”, creates a great opportunity to learn about the biomass. This may be achieved due to the fact that the impenetrability can be considered a collective response to a few factors originating in 3D space that encompass the outermost boundaries of vegetation. The biomass, presence in InSAR datasets or simply the biomass impenetrability, is the focus of this research. The report, presented in a sequence of sections, gradually introduces terminology, physical and mathematical fundamentals commonly used in describing the propagation of electromagnetic waves, including the Maxwell equations. The synthetic aperture radar (SAR) and InSAR as active remote sensing methods are summarised. In subsequent steps, the major InSAR data sources and data acquisition systems, past and present, are outlined. Various examples of the InSAR datasets, including the SRTM C- and X-band elevation products and INTERMAP Inc. IFSAR digital terrain/surface models (DTM/DSM), representing diverse test sites in the world are used to demonstrate the presence and/or magnitude of the biomass impenetrability in the context of different types of vegetation – usually forest. Also, results of investigations carried out by selected researchers on the elevation bias in InSAR datasets and their attempts at mathematical modelling are reviewed. In recent years, a few researchers have suggested that the magnitude of the biomass impenetrability is linked to gaps in the vegetation cover. Based on these hints, a mathematical model of the tree and the forest has been developed. Three types of gaps were identified; gaps in the landscape-scale forest areas (Type 1), e.g. forest fire scares and logging areas; a gap between three trees forming a triangle (Type 2), e.g. depending on the shape of tree crowns; and gaps within a tree itself (Type 3). Experiments have demonstrated that Type 1 gaps follow the power-law density distribution function. One of the most useful features of the power-law distributed phenomena is their scale-independent property. This property was also used to model Type 3 gaps (within the tree crown) by assuming that these gaps follow the same distribution as the Type 1 gaps. A hypothesis was formulated regarding the penetration depth of the radar waves within the canopy. It claims that the depth of penetration is simply related to the quantisation level of the radar backscattered signal. A higher level of bits per pixels allows for capturing weaker signals arriving from the lower levels of the tree crown. Assuming certain generic and simplified shapes of tree crowns including cone, paraboloid, sphere and spherical cap, it was possible to model analytically Type 2 gaps. The Monte Carlo simulation method was used to investigate relationships between the impenetrability and various configurations of a modelled forest. One of the most important findings is that impenetrability is largely explainable by the gaps between trees. A much less important role is played by the penetrability into the crown cover. Another important finding is that the impenetrability strongly correlates with the vegetation density. Using this feature, a method for vegetation density mapping called the mean maximum impenetrability (MMI) method is proposed. Unlike the traditional methods of forest inventories, the MMI method allows for a much more realistic inventory of vegetation cover, because it is able to capture an in situ or current situation on the ground, but not for areas that are nominally classified as a “forest-to-be”. The MMI method also allows for the mapping of landscape variation in the forest or vegetation density, which is a novel and exciting feature of the new 3D remote sensing (3DRS) technique. Besides the inventory-type applications, the MMI method can be used as a forest change detection method. For maximum effectiveness of the MMI method, an object-based change detection approach is preferred. A minimum requirement for the MMI method is a time-lapsed reference dataset in the form, for example, of an existing forest map of the area of interest, or a vegetation density map prepared using InSAR datasets. Preliminary tests aimed at finding a degree of correlation between the impenetrability and other types of passive and active remote sensing data sources, including TerraSAR-X, NDVI and PALSAR, proved that the method most sensitive to vegetation density was the Japanese PALSAR - L-band SAR system. Unfortunately, PALSAR backscattered signals become very noisy for impenetrability below 15 m. This means that PALSAR has severe limitations for low loadings of the biomass per unit area. The proposed applications of the InSAR data will remain indispensable wherever cloud cover obscures the sky in a persistent manner, which makes suitable optical data acquisition extremely time-consuming or nearly impossible. A limitation of the MMI method is due to the fact that the impenetrability is calculated using a reference DTM, which must be available beforehand. In many countries around the world, appropriate quality DTMs are still unavailable. A possible solution to this obstacle is to use a DEM that was derived using P-band InSAR elevations or LiDAR. It must be noted, however, that in many cases, two InSAR datasets separated by time of the same area are sufficient for forest change detection or similar applications

Sensibilité des observables radars à la variabilité temporelle et à la configuration géométrique de forêts tempérées et tropicales à partir de mesure de proximité haute-résolution

L'augmentation importante de la population mondiale, et par conséquent de ses besoins, exerce une pression de plus en plus importante sur les surfaces forestières. L'outil le mieux adapté au suivi des forêts, à l'échelle du globe, est la télédétection. C'est dans ce contexte que se situe ce travail de thèse, qui vise à améliorer l'estimation des paramètres biophysiques des arbres à partir de données de télédétection. L'originalité de ce travail a été d'étudier cette estimation des paramètres biophysiques en menant plusieurs études de sensibilité avec une démarche expérimentale sur des données expérimentales et sur des données simulées. Tout d'abord, l'étude s'est portée sur des séries temporelles de mesures de diffusiométrie radar obtenues sur deux sites : l'un constitué d'un cèdre en zone tempérée et l'autre d'une parcelle de forêt tropicale. Puis, cette étude de sensibilité a été poursuivie en imageant, avec une résolution élevée, plusieurs parcelles aux configurations différentes à l'intérieur d'une forêt de pin. Enfin, des données optiques et radars simulées ont été fusionnés afin d'évaluer l'apport de la fusion de données optique et radar dans l'inversion des paramètres biophysiques.The significant increase of the world population, and therefore its needs, pushes increasingly high in forest areas. The best tool for monitoring forest across the globe is remote sensing. It is in this context that this thesis, which aims to improve the retrieval of biophysical parameters of trees from remote sensing data, takes place. The originality of this work was to study the estimation of biophysical parameters across multiple sensitivity studies on experimental data and simulated data. First, the study focused on the time series of radar scatterometry measurements obtained on two sites: one characterized by a cedar in the temperate zone and the other by a forest plot of rainforest. Then, the sensitivity analysis was continued by imaging with high resolution, several forest plots with different configurations within a pine forest. Finally, simulated radar and optical data were combined to evaluate the contribution of optical and radar data fusion in the inversion of biophysical parameters.RENNES1-Bibl. électronique (352382106) / SudocSudocFranceF

HIRIS (High-Resolution Imaging Spectrometer: Science opportunities for the 1990s. Earth observing system. Volume 2C: Instrument panel report

The high-resolution imaging spectrometer (HIRIS) is an Earth Observing System (EOS) sensor developed for high spatial and spectral resolution. It can acquire more information in the 0.4 to 2.5 micrometer spectral region than any other sensor yet envisioned. Its capability for critical sampling at high spatial resolution makes it an ideal complement to the MODIS (moderate-resolution imaging spectrometer) and HMMR (high-resolution multifrequency microwave radiometer), lower resolution sensors designed for repetitive coverage. With HIRIS it is possible to observe transient processes in a multistage remote sensing strategy for Earth observations on a global scale. The objectives, science requirements, and current sensor design of the HIRIS are discussed along with the synergism of the sensor with other EOS instruments and data handling and processing requirements

Earth Resources: A continuing bibliography with indexes, issue 16, January 1978

This bibliography lists 543 reports, articles, and other documents introduced onto the NASA scientific and technical information system between October 1 and December 31, 1977. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, hydrology and water management, data processing and distribution systems, instrumentation and sensors, and economic analysis

Earth resources: A continuing bibliography with indexes, issue 21

A bibliography list of 369 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1979 and March 31, 1979 is presented. Emphasis is placed on the use of remote sensing and geophysical instrumentation in spacecraft and aircraft to survey and inventory natural resources and urban areas. Subject matter is grouped according to agriculture and forestry, environmental changes and cultural resources, geodesy and cartography, geology and mineral resources, hydrology and water management, data processing and distribution systems, instrumentation and sensors, and economic analysis

Skylab EREP Investigations Summary

The problems in the areas of agriculture, range and forestry; land use and cartography; geology and hydrology; oceans atmosphere, and data analysis techniques were investigated and summarized using Earth Resources Experiment Package (EREP) data

Radar remote sensing data for applications in forestry

This thesis describes an investigation into the applications of radar remote sensing in forestry. During a four-year period (1982-1985), an extensive set of radar data was acquired at four test sites with forest plantations in The Netherlands: the Roggebotzand and Horsterwold sites at Flevoland and the Speulderbos and Kootwijk sites at The Veluwe. Two systems were deployed: a digital X-band SLAR and the multiband airborne scatterometer Dutscat. The thesis includes a description of these systems and the radar signal properties. Results of radar signature, transmissivity and canopy probing measurements are described. After discussing the physical properties of the radar data, the use of spatial analysis techniques is evaluated and the potential applications of radar data for classification and biophysical parameter estimation are elaborated. The thesis concludes with a conceptual elaboration of processing and data interpretation strategies