A Multi-core processor for hard real-time systems

The increasing demand for new functionalities in current and future hard real-time embedded systems, like the ones deployed in automotive and avionics industries, is driving an increment in the performance required in current embedded processors. Multi-core processors represent a good design solution to cope with such higher performance requirements due to their better performance-per-watt ratio while maintaining the core design simple. Moreover, multi-cores also allow executing mixed-criticality level workloads composed of tasks with and without hard real-time requirements, maximizing the utilization of the hardware resources while guaranteeing low cost and low power consumption. Despite those benefits, current multi-core processors are less analyzable than single-core ones due to the interferences between different tasks when accessing hardware shared resources. As a result, estimating a meaningful Worst-Case Execution Time (WCET) estimation - i.e. to compute an upper bound of the application's execution time - becomes extremely difficult, if not even impossible, because the execution time of a task may change depending on the other threads running at the same time. This makes the WCET of a task dependent on the set of inter-task interferences introduced by the co-running tasks. Providing a WCET estimation independent from the other tasks (time composability property) is a key requirement in hard real-time systems. This thesis proposes a new multi-core processor design in which time composability is achieved, hence enabling the use of multi-cores in hard real-time systems. With our proposals the WCET estimation of a HRT is independent from the other co-running tasks. To that end, we design a multi-core processor in which the maximum delay a request from a Hard Real-time Task (HRT), accessing a hardware shared resource can suffer due to other tasks is bounded: our processor guarantees that a request to a shared resource cannot be delayed longer than a given Upper Bound Delay (UBD). In addition, the UBD allows identifying the impact that different processor configurations may have on the WCET by determining the sensitivity of a HRT to different resource allocations. This thesis proposes an off-line task allocation algorithm (called IA3: Interference-Aware Allocation Algorithm), that allocates tasks in a task set based on the HRT's sensitivity to different resource allocations. As a result the hardware shared resources used by HRTs are minimized, by allowing Non Hard Real-time Tasks (NHRTs) to use the rest of resources. Overall, our proposals provide analyzability for the HRTs allowing NHRTs to be executed into the same chip without any effect on the HRTs. The previous first two proposals of this thesis focused on supporting the execution of multi-programmed workloads with mixed-criticality levels (composed of HRTs and NHRTs). Higher performance could be achieved by implementing multi-threaded applications. As a first step towards supporting hard real-time parallel applications, this thesis proposes a new hardware/software approach to guarantee a predictable execution of software pipelined parallel programs. This thesis also investigates a solution to verify the timing correctness of HRTs without requiring any modification in the core design: we design a hardware unit which is interfaced with the processor and integrated into a functional-safety aware methodology. This unit monitors the execution time of a block of instructions and it detects if it exceeds the WCET. Concretely, we show how to handle timing faults on a real industrial automotive platform.La creciente demanda de nuevas funcionalidades en los sistemas empotrados de tiempo real actuales y futuros en industrias como la automovilística y la de aviación, está impulsando un incremento en el rendimiento necesario en los actuales procesadores empotrados. Los procesadores multi-núcleo son una solución eficiente para obtener un mayor rendimiento ya que aumentan el rendimiento por vatio, manteniendo el diseño del núcleo simple. Por otra parte, los procesadores multi-núcleo también permiten ejecutar cargas de trabajo con niveles de tiempo real mixtas (formadas por tareas de tiempo real duro y laxo así como tareas sin requerimientos de tiempo real), maximizando así la utilización de los recursos de procesador y garantizando el bajo consumo de energía. Sin embargo, a pesar los beneficios mencionados anteriormente, los actuales procesadores multi-núcleo son menos analizables que los de un solo núcleo debido a las interferencias surgidas cuando múltiples tareas acceden simultáneamente a los recursos compartidos del procesador. Como resultado, la estimación del peor tiempo de ejecución (conocido como WCET) - es decir, una cota superior del tiempo de ejecución de la aplicación - se convierte en extremadamente difícil, si no imposible, porque el tiempo de ejecución de una tarea puede cambiar dependiendo de las otras tareas que se estén ejecutando concurrentemente. Determinar una estimación del WCET independiente de las otras tareas es un requisito clave en los sistemas empotrados de tiempo real duro. Esta tesis propone un nuevo diseño de procesador multi-núcleo en el que el tiempo de ejecución de las tareas se puede componer, lo que permitirá el uso de procesadores multi-núcleo en los sistemas de tiempo real duro. Para ello, diseñamos un procesador multi-núcleo en el que la máxima demora que puede sufrir una petición de una tarea de tiempo real duro (HRT) para acceder a un recurso hardware compartido debido a otras tareas está acotado, tiene un límite superior (UBD). Además, UBD permite identificar el impacto que las diferentes posibles configuraciones del procesador pueden tener en el WCET, mediante la determinación de la sensibilidad en la variación del tiempo de ejecución de diferentes reservas de recursos del procesador. Esta tesis propone un algoritmo estático de reserva de recursos (llamado IA3), que asigna tareas a núcleos en función de dicha sensibilidad. Como resultado los recursos compartidos del procesador usados por tareas HRT se reducen al mínimo, permitiendo que las tareas sin requerimiento de tiempo real (NHRTs) puedas beneficiarse del resto de recursos. Por lo tanto, las propuestas presentadas en esta tesis permiten el análisis del WCET para tareas HRT, permitiendo así mismo la ejecución de tareas NHRTs en el mismo procesador multi-núcleo, sin que estas tengan ningún efecto sobre las tareas HRT. Las propuestas presentadas anteriormente se centran en el soporte a la ejecución de múltiples cargas de trabajo con diferentes niveles de tiempo real (HRT y NHRTs). Sin embargo, un mayor rendimiento puede lograrse mediante la transformación una tarea en múltiples sub-tareas paralelas. Esta tesis propone una nueva técnica, con soporte del procesador y del sistema operativo, que garantiza una ejecución analizable del modelo de ejecución paralela software pipelining. Esta tesis también investiga una solución para verificar la corrección del WCET de HRT sin necesidad de ninguna modificación en el diseño de la base: un nuevo componente externo al procesador se conecta a este sin necesidad de modificarlo. Esta nueva unidad monitorea el tiempo de ejecución de un bloque de instrucciones y detecta si se excede el WCET. Esta unidad permite detectar fallos de sincronización en sistemas de computación utilizados en automóviles

Real-time analysis of MPI programs for NoC-based many-cores using time division multiplexing

Worst-case execution time (WCET) analysis is crucial for designing hard real-time systems. While the WCET of tasks in a single core system can be upper bounded in isolation, the tasks in a many-core system are subject to shared memory interferences which impose high overestimation of the WCET bounds. However, many-core-based massively parallel applications will enter the area of real-time systems in the years ahead. Explicit message-passing and a clear separation of computation and communication facilitates WCET analysis for those programs. A standard programming model for message-based communication is the message passing interface (MPI). It provides an application independent interface for different standard communication operations (e.g. broadcast, gather, ...). Thereby, it uses efficient communication patterns with deterministic behaviour. In applying these known structures, we target to provide a WCET analysis for communication that is reusable for different applications if the communication is executed on the same underlying platform. Hence, the analysis must be performed once per hardware platform and can be reused afterwards with only adapting several parameters such as the number of nodes participating in that communication. Typically, the processing elements of many-core platforms are connected via a Network-on-Chip (NoC) and apply techniques such as time-division multiplexing (TDM) to provide guaranteed services for the network. Hence, the hardware and the applied technique for guaranteed service needs to facilitate this reusability of the analysis as well. In this work we review different general-purpose TDM schedules that enable a WCET approximation independent of the placement of tasks on processing elements of a many-core which uses a NoC with torus topology. Furthermore, we provide two new schedules that show a similar performance as the state-of-the-art schedules but additionally serve situations where the presented state-of-the-art schedules perform poorly. Based on these schedules a procedure for the WCET analysis of the communication patterns used in MPI is proposed. Finally, we show how to apply the results of the analysis to calculate the WCET upper bound for a complete MPI program. Detailed insights in the performance of the applied TDM schedules are provided by comparing the schedules to each other in terms of timing. Additionally, we discuss the exhibited timing of the general-purpose schedules compared to a state-of-the-art application specific TDM schedule to put in relation both types of schedules. We apply the proposed procedure to several standard types of communication provided in MPI and compare different patterns that are used to implement a specific communication. Our evaluation investigates the communications’ building blocks of the timing bounds and shows the tremendous impact of choosing the appropriate communication pattern. Finally, a case study demonstrates the application of the presented procedure to a complete MPI program. With the method proposed in this work it is possible to perform a reusable WCET timing analysis for the communication in a NoC that is independent of the placement of tasks on the chip. Moreover, as the applied schedules are not optimized for a specific application but can be used for all applications in the same way, there are only marginal changes in the timing of the communication when the software is adapted or updated. Thus, there is no need to perform the timing analysis from scratch in such cases

Memory-Aware Scheduling for Fixed Priority Hard Real-Time Computing Systems

As a major component of a computing system, memory has been a key performance and power consumption bottleneck in computer system design. While processor speeds have been kept rising dramatically, the overall computing performance improvement of the entire system is limited by how fast the memory can feed instructions/data to processing units (i.e. so-called memory wall problem). The increasing transistor density and surging access demands from a rapidly growing number of processing cores also significantly elevated the power consumption of the memory system. In addition, the interference of memory access from different applications and processing cores significantly degrade the computation predictability, which is essential to ensure timing specifications in real-time system design. The recent IC technologies (such as 3D-IC technology) and emerging data-intensive real-time applications (such as Virtual Reality/Augmented Reality, Artificial Intelligence, Internet of Things) further amplify these challenges. We believe that it is not simply desirable but necessary to adopt a joint CPU/Memory resource management framework to deal with these grave challenges. In this dissertation, we focus on studying how to schedule fixed-priority hard real-time tasks with memory impacts taken into considerations. We target on the fixed-priority real-time scheduling scheme since this is one of the most commonly used strategies for practical real-time applications. Specifically, we first develop an approach that takes into consideration not only the execution time variations with cache allocations but also the task period relationship, showing a significant improvement in the feasibility of the system. We further study the problem of how to guarantee timing constraints for hard real-time systems under CPU and memory thermal constraints. We first study the problem under an architecture model with a single core and its main memory individually packaged. We develop a thermal model that can capture the thermal interaction between the processor and memory, and incorporate the periodic resource sever model into our scheduling framework to guarantee both the timing and thermal constraints. We further extend our research to the multi-core architectures with processing cores and memory devices integrated into a single 3D platform. To our best knowledge, this is the first research that can guarantee hard deadline constraints for real-time tasks under temperature constraints for both processing cores and memory devices. Extensive simulation results demonstrate that our proposed scheduling can improve significantly the feasibility of hard real-time systems under thermal constraints

Performanzanalyse für Multi-Core Multi-Mode Systeme mit gemeinsam genutzten Ressourcen - Verfahren und Anwendung auf AUTOSAR -

In order to implement multi-core systems for single-mode and multi-mode real-time applications, as can be found in modern automobiles, their development process requires appropriate methods and tools for timing and performance verification. In this context, this thesis proposes first novel approaches for the analysis of worst-case blocking-times and response-times for single-mode real-time applications that share resources in partitioned multi-core systems. For this purpose a compositional performance analysis methodology is adopted and extended to take into account the contention of tasks on the processor cores and on the shared resources under different combinations of processor scheduling policies and shared resource arbitration strategies. Highly relevant is the compatibility of the proposed analysis methods with the specifications of the automotive AUTOSAR standard, which defines the combination of (1) preemptive, non-preemptive and cooperative core local scheduling with (2) lock-based arbitration of core local shared resources and spinlock-based arbitration of inter-core shared resources. Further, this thesis proposes novel timing analysis solutions for multi-mode distributed real-time systems. For such systems, the settling time of a mode change, called mode change transition latency, is identified as an important system parameter that has been neglected before. This thesis contributes a novel analysis algorithm which gives a maximum bound on each mode change transition latency of multi-mode distributed applications. Knowing the settling time of each mode change, the impact of multiple mode changes and of the possible overload situations can be handled in the early development phases of real-time systems. Finally, an approach for safely handling shared resources across mode changes is presented and a corresponding timing analysis method is contributed. The new analysis solution combines modeling and analysis elements of the multi-core and multi-mode related analysis solutions and focuses on the specification of the AUTOSAR standard. This enables system designers to handle the timing behavior of more complex systems in which the problems of mode management, multi-core scheduling and shared resource arbitration coexist. The applicability and usefulness of the contributed analysis solutions are highlighted by experimental evaluations, which are enabled by the implementation of the proposed analysis methods in a performance analysis tool framework.Um Multicore-Systeme für die Umsetzung zeitkritischer Single- und Multi-Mode Anwendungen in sicherheitskritischen Umgebungen einsetzen zu können, werden in dem Entwicklungsprozess geeignete Analysemethoden und Tools zur Bestimmung des Zeitverhaltens und der Performanz benötigt. Als erster Beitrag dieser Dissertation werden neue Analyseverfahren eingeführt, um die Worst-Case-Antwortzeiten und -Blockierungszeiten für statische Echtzeitanwendungen in Single-Mode eingebetteten Multicore-Systemen mit gemeinsam genutzten Ressourcen zu bestimmen. Die entwickelten Verfahren nutzen einen existierenden kompositionellen Performanzanalyseansatz und erweitern diesen, um verschiedene Kombinationen von partitionierenden Multiprozessor-Schedulingverfahren und –Synchronisationsmechanismen behandeln zu können. Besonders praxisrelevant ist die Möglichkeit, die Kombination von (1) preemptives, nicht-preemptives sowie kooperatives Prozessor-Scheduling und (2) Spinlock-basierten Synchronisationsmechanismen zu analysieren, die heute in AUTOSAR-konformen Automotive-Softwarearchitekturen standardisiert sind. Als zweiter Beitrag wird in dieser Dissertation ein neuer Ansatz für die Analyse der zeitlichen Auswirkungen von mehreren Szenarienübergängen in vernetzten Multi-Mode eingebetteten Systemen eingeführt. Als erste konstruktive Maßnahme ermöglicht das in dieser Arbeit präsentierte Verfahren die Berechnung der Einschwingzeit jedes Szenarioübergangs und leistet dadurch eine wichtige Hilfestellung beim Systementwurf. Auf diese Weise können die Auswirkungen der Szenarienübergänge, einschließlich der zeitlich begrenzten Überlastsituationen, kontrolliert und in den Systementwurf frühzeitig einbezogen werden. Als letzter Beitrag dieser Dissertation wird ein Ansatz für die Handhabung der Zugriffskonflikte auf gemeinsam genutzten Ressourcen in Multi-Mode eingebetteten Multicore-Systemen präsentiert und eine entsprechende Analysemethode eingeführt. Die neue Analyse kombiniert Modellierungs- und Analyse-Elemente der vorher in dieser Arbeit eingeführten Analyseansätze, und ermöglicht die Untersuchung des ungünstigsten Zeitverhaltens viel komplexer eingebetteten Multicore-Systemen. Dabei werden erneut Spezifikationen der AUTOSAR-Standards berücksichtigt. Nicht zuletzt werden alle Analysemethoden in eine Toolumgebung implementiert und für verschiedene Experimente, die deren praktische Anwendbarkeit hervorheben, angewendet

Fundamentals

Volume 1 establishes the foundations of this new field. It goes through all the steps from data collection, their summary and clustering, to different aspects of resource-aware learning, i.e., hardware, memory, energy, and communication awareness. Machine learning methods are inspected with respect to resource requirements and how to enhance scalability on diverse computing architectures ranging from embedded systems to large computing clusters

Gestión de jerarquías de memoria híbridas a nivel de sistema

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadoras y Automática y de Ku Leuven, Arenberg Doctoral School, Faculty of Engineering Science, leída el 11/05/2017.In electronics and computer science, the term ‘memory’ generally refers to devices that are used to store information that we use in various appliances ranging from our PCs to all hand-held devices, smart appliances etc. Primary/main memory is used for storage systems that function at a high speed (i.e. RAM). The primary memory is often associated with addressable semiconductor memory, i.e. integrated circuits consisting of silicon-based transistors, used for example as primary memory but also other purposes in computers and other digital electronic devices. The secondary/auxiliary memory, in comparison provides program and data storage that is slower to access but offers larger capacity. Examples include external hard drives, portable flash drives, CDs, and DVDs. These devices and media must be either plugged in or inserted into a computer in order to be accessed by the system. Since secondary storage technology is not always connected to the computer, it is commonly used for backing up data. The term storage is often used to describe secondary memory. Secondary memory stores a large amount of data at lesser cost per byte than primary memory; this makes secondary storage about two orders of magnitude less expensive than primary storage. There are two main types of semiconductor memory: volatile and nonvolatile. Examples of non-volatile memory are ‘Flash’ memory (sometimes used as secondary, sometimes primary computer memory) and ROM/PROM/EPROM/EEPROM memory (used for firmware such as boot programs). Examples of volatile memory are primary memory (typically dynamic RAM, DRAM), and fast CPU cache memory (typically static RAM, SRAM, which is fast but energy-consuming and offer lower memory capacity per are a unit than DRAM). Non-volatile memory technologies in Si-based electronics date back to the 1990s. Flash memory is widely used in consumer electronic products such as cellphones and music players and NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. The rapid increase of leakage currents in Silicon CMOS transistors with scaling poses a big challenge for the integration of SRAM memories. There is also the case of susceptibility to read/write failure with low power schemes. As a result of this, over the past decade, there has been an extensive pooling of time, resources and effort towards developing emerging memory technologies like Resistive RAM (ReRAM/RRAM), STT-MRAM, Domain Wall Memory and Phase Change Memory(PRAM). Emerging non-volatile memory technologies promise new memories to store more data at less cost than the expensive-to build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. These new memory technologies combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the non-volatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. The research and information on these Non-Volatile Memory (NVM) technologies has matured over the last decade. These NVMs are now being explored thoroughly nowadays as viable replacements for conventional SRAM based memories even for the higher levels of the memory hierarchy. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional(3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years...En el campo de la informática, el término ‘memoria’ se refiere generalmente a dispositivos que son usados para almacenar información que posteriormente será usada en diversos dispositivos, desde computadoras personales (PC), móviles, dispositivos inteligentes, etc. La memoria principal del sistema se utiliza para almacenar los datos e instrucciones de los procesos que se encuentre en ejecución, por lo que se requiere que funcionen a alta velocidad (por ejemplo, DRAM). La memoria principal está implementada habitualmente mediante memorias semiconductoras direccionables, siendo DRAM y SRAM los principales exponentes. Por otro lado, la memoria auxiliar o secundaria proporciona almacenaje(para ficheros, por ejemplo); es más lenta pero ofrece una mayor capacidad. Ejemplos típicos de memoria secundaria son discos duros, memorias flash portables, CDs y DVDs. Debido a que estos dispositivos no necesitan estar conectados a la computadora de forma permanente, son muy utilizados para almacenar copias de seguridad. La memoria secundaria almacena una gran cantidad de datos aun coste menor por bit que la memoria principal, siendo habitualmente dos órdenes de magnitud más barata que la memoria primaria. Existen dos tipos de memorias de tipo semiconductor: volátiles y no volátiles. Ejemplos de memorias no volátiles son las memorias Flash (algunas veces usadas como memoria secundaria y otras veces como memoria principal) y memorias ROM/PROM/EPROM/EEPROM (usadas para firmware como programas de arranque). Ejemplos de memoria volátil son las memorias DRAM (RAM dinámica), actualmente la opción predominante a la hora de implementar la memoria principal, y las memorias SRAM (RAM estática) más rápida y costosa, utilizada para los diferentes niveles de cache. Las tecnologías de memorias no volátiles basadas en electrónica de silicio se remontan a la década de1990. Una variante de memoria de almacenaje por carga denominada como memoria Flash es mundialmente usada en productos electrónicos de consumo como telefonía móvil y reproductores de música mientras NAND Flash solid state disks(SSDs) están progresivamente desplazando a los dispositivos de disco duro como principal unidad de almacenamiento en computadoras portátiles, de escritorio e incluso en centros de datos. En la actualidad, hay varios factores que amenazan la actual predominancia de memorias semiconductoras basadas en cargas (capacitivas). Por un lado, se está alcanzando el límite de integración de las memorias Flash, lo que compromete su escalado en el medio plazo. Por otra parte, el fuerte incremento de las corrientes de fuga de los transistores de silicio CMOS actuales, supone un enorme desafío para la integración de memorias SRAM. Asimismo, estas memorias son cada vez más susceptibles a fallos de lectura/escritura en diseños de bajo consumo. Como resultado de estos problemas, que se agravan con cada nueva generación tecnológica, en los últimos años se han intensificado los esfuerzos para desarrollar nuevas tecnologías que reemplacen o al menos complementen a las actuales. Los transistores de efecto campo eléctrico ferroso (FeFET en sus siglas en inglés) se consideran una de las alternativas más prometedores para sustituir tanto a Flash (por su mayor densidad) como a DRAM (por su mayor velocidad), pero aún está en una fase muy inicial de su desarrollo. Hay otras tecnologías algo más maduras, en el ámbito de las memorias RAM resistivas, entre las que cabe destacar ReRAM (o RRAM), STT-RAM, Domain Wall Memory y Phase Change Memory (PRAM)...Depto. de Arquitectura de Computadores y AutomáticaFac. de InformáticaTRUEunpu

Fundamentals

Volume 1 establishes the foundations of this new field. It goes through all the steps from data collection, their summary and clustering, to different aspects of resource-aware learning, i.e., hardware, memory, energy, and communication awareness. Machine learning methods are inspected with respect to resource requirements and how to enhance scalability on diverse computing architectures ranging from embedded systems to large computing clusters