Convolutional neural network-based finger vein recognition using near infrared images

Convolutional Neural Network (CNN) is opening new horizons in biometrics-based authentication field and finger vein recognition is the prominent one which can provide the best possible security system depending on this aforementioned technology. In this paper, we used 5 convolutional layers and 4 fully-connected layers where our developed network has shown the capability to produce the result with almost 100% accuracy rate which became possible due to the fact that deep learning, an end-to-end system is used which performs better in a lot of aspects in comparison to conventional techniques.Convolutional Neural Network (CNN) is opening new horizons in biometrics-based authentication field and finger vein recognition is the prominent one which can provide the best possible security system depending on this aforementioned technology. In this paper, we used 5 convolutional layers and 4 fully-connected layers where our developed network has shown the capability to produce the result with almost 100% accuracy rate which became possible due to the fact that deep learning, an end-to-end system is used which performs better in a lot of aspects in comparison to conventional techniques

Biometric Systems

Biometric authentication has been widely used for access control and security systems over the past few years. The purpose of this book is to provide the readers with life cycle of different biometric authentication systems from their design and development to qualification and final application. The major systems discussed in this book include fingerprint identification, face recognition, iris segmentation and classification, signature verification and other miscellaneous systems which describe management policies of biometrics, reliability measures, pressure based typing and signature verification, bio-chemical systems and behavioral characteristics. In summary, this book provides the students and the researchers with different approaches to develop biometric authentication systems and at the same time includes state-of-the-art approaches in their design and development. The approaches have been thoroughly tested on standard databases and in real world applications

Multi-Distance Veins Projection Based on Single Axis Camera and Projector System

Every person has different location of veins, some veins are easily detected because it is visible due to thin tissue, and the other are invisible. This different location of veins causes intravenous access procedures and the procreas of intravenous therapy become longer. Multi-distance vein projections aim to simplify the measurement process where the device and object do not have to be at a certain distance. Some research that has been done especially for real-time vein projection does not conduct how the characteristics of projection at different distances. In this paper, we propose a method for performing multi-distance real-time back-projection by using the intersection between camera and projector. This method equiped with an ultrasonic distance sensor to identify the projection characteristic in any distance. In its implementation, this method is able to project at a distance of 20-40 cm with a maximum projection error of 0.6 mm. The measurement angle tolerance between the object and the device is ±5 degrees with a maximum error of 0.7 mm

Advanced Biometrics with Deep Learning

Biometrics, such as fingerprint, iris, face, hand print, hand vein, speech and gait recognition, etc., as a means of identity management have become commonplace nowadays for various applications. Biometric systems follow a typical pipeline, that is composed of separate preprocessing, feature extraction and classification. Deep learning as a data-driven representation learning approach has been shown to be a promising alternative to conventional data-agnostic and handcrafted pre-processing and feature extraction for biometric systems. Furthermore, deep learning offers an end-to-end learning paradigm to unify preprocessing, feature extraction, and recognition, based solely on biometric data. This Special Issue has collected 12 high-quality, state-of-the-art research papers that deal with challenging issues in advanced biometric systems based on deep learning. The 12 papers can be divided into 4 categories according to biometric modality; namely, face biometrics, medical electronic signals (EEG and ECG), voice print, and others

Proceedings of the 9th Arab Society for Computer Aided Architectural Design (ASCAAD) international conference 2021 (ASCAAD 2021): architecture in the age of disruptive technologies: transformation and challenges.

The ASCAAD 2021 conference theme is Architecture in the age of disruptive technologies: transformation and challenges. The theme addresses the gradual shift in computational design from prototypical morphogenetic-centered associations in the architectural discourse. This imminent shift of focus is increasingly stirring a debate in the architectural community and is provoking a much needed critical questioning of the role of computation in architecture as a sole embodiment and enactment of technical dimensions, into one that rather deliberately pursues and embraces the humanities as an ultimate aspiration

The association between macular pigment optical density and glare recovery time with selected macular degeneration and ocular vascular perfusion risk factors

Age-related macular degeneration (AMD) is the most common cause of severe visual impairment affecting older adults in the developed world. The pathogenesis of AMD is not fully understood. This study sought to investigate the association between macular pigment optical density (MPOD) and glare recovery time (GRT) with a selection of other confirmed and putative AMD risk factors (RF): age, gender, body mass index (BMI), calculated percentage body fat (%BF), iris colour, family history (FH) of AMD, and ocular vascular perfusion (OVP) RF: migraine, Raynaud's phenomenon (Rph) and vascular dysregulation (VDys). Interocular comparison was assessed for MPOD and GRT. The effect of ocular dominance on MPOD and GRT, and GRT repeatability was also examined. The use of GRT as a surrogate measure for MPOD was assessed. In this healthy, mixed-gender, White population no significant association was found between MPOD measured by heterochromatic flicker photometry (HFP) at 0.5° eccentricity and any AMD or OVP RF assessed by this study. No significant interocular difference in MPOD was found. No significant association was found between MPOD and ocular dominance. GRT after 30-second duration bleach using the direct ophthalmoscope was significantly and positively associated with age. No significant association was found for any other AMD or OVP RF examined, after correction for age. No significant interocular difference was found. No significant association was found with ocular dominance. GRT intra-session repeatability was good and inter-session repeatability was moderate. This method of GRT was not found to be a good surrogate measure for MPOD. This study generated three new theories: the possible association between the OVP RF migraine, Rph and VDys and AMD risk, the Müller cell (Mc) / neuroglial cell hypothesis for macular pigment, and the retinal theory for Meares-Irlen syndrome (MIS) also known as Visual Stress

An Analysis of Astronaut Performance Capability in the Lunar Environment. Volume 2 - Performance Capability Support Data

Astronaut performance capability in lunar environmen

Optical Methods in Sensing and Imaging for Medical and Biological Applications

The recent advances in optical sources and detectors have opened up new opportunities for sensing and imaging techniques which can be successfully used in biomedical and healthcare applications. This book, entitled ‘Optical Methods in Sensing and Imaging for Medical and Biological Applications’, focuses on various aspects of the research and development related to these areas. The book will be a valuable source of information presenting the recent advances in optical methods and novel techniques, as well as their applications in the fields of biomedicine and healthcare, to anyone interested in this subject

Portugal SB13: contribution of sustainable building to meet EU 20-20-20 targets

Proceedings of the International Conference Portugal SB13: contribution of sustainable building to meet EU 20-20-20 targetsThe international conference Portugal SB13 is organized by the University of Minho, the Technical University of Lisbon and the Portuguese Chapter of the International Initiative for a Sustainable Built Environment in Guimarães, Portugal, from the 30th of October till the 1st of November 2013. This conference is included in the Sustainable Building Conference Series 2013-2014 (SB13-14) that are being organized all over the world. The event is supported by high prestige partners, such as the International Council for Research and Innovation in Building and Construction (CIB), the United Nations Environment Programme (UNEP), the International Federation of Consulting Engineers (FIDIC) and the International Initiative for a Sustainable Built Environment (iiSBE). Portugal SB13 is focused on the theme â Sustainable Building Contribution to Achieve the European Union 20-20-20 Targetsâ . These targets, known as the â EU 20-20-20â targets, set three key objectives for 2020: - A 20% reduction in EU greenhouse gas emissions from 1990 levels; - Raising the share of EU energy consumption produced from renewable resources to 20%; - A 20% improvement in the EU's energy efficiency. Building sector uses about 40% of global energy, 25% of global water, 40% of global resources and emit approximately 1/3 of the global greenhouse gas emissions (the largest contributor). Residential and commercial buildings consume approximately 60% of the worldâ s electricity. Existing buildings represent significant energy saving opportunities because their performance level is frequently far below the current efficiency potentials. Energy consumption in buildings can be reduced by 30 to 80% using proven and commercially available technologies. Investment in building energy efficiency is accompanied by significant direct and indirect savings, which help offset incremental costs, providing a short return on investment period. Therefore, buildings offer the greatest potential for achieving significant greenhouse gas emission reductions, at least cost, in developed and developing countries. On the other hand, there are many more issues related to the sustainability of the built environment than energy. The building sector is responsible for creating, modifying and improving the living environment of the humanity. Construction and buildings have considerable environmental impacts, consuming a significant proportion of limited resources of the planet including raw material, water, land and, of course, energy. The building sector is estimated to be worth 10% of global GDP (5.5 trillion EUR) and employs 111 million people. In developing countries, new sustainable construction opens enormous opportunities because of the population growth and the increasing prosperity, which stimulate the urbanization and the construction activities representing up to 40% of GDP. Therefore, building sustainably will result in healthier and more productive environments. The sustainability of the built environment, the construction industry and the related activities are a pressing issue facing all stakeholders in order to promote the Sustainable Development. The Portugal SB13 conference topics cover a wide range of up-to-date issues and the contributions received from the delegates reflect critical research and the best available practices in the Sustainable Building field. The issues presented include: - Nearly Zero Energy Buildings - Policies for Sustainable Construction - High Performance Sustainable Building Solutions - Design and Technologies for Energy Efficiency - Innovative Construction Systems - Building Sustainability Assessment Tools - Renovation and Retrofitting - Eco-Efficient Materials and Technologies - Urban Regeneration - Design for Life Cycle and Reuse - LCA of sustainable materials and technologies All the articles selected for presentation at the conference and published in these Proceedings, went through a refereed review process and were evaluated by, at least, two reviewers. The Organizers want to thank all the authors who have contributed with papers for publication in the proceedings and to all reviewers, whose efforts and hard work secured the high quality of all contributions to this conference. A special gratitude is also addressed to Eng. José Amarílio Barbosa and to Eng. Catarina Araújo that coordinated the Secretariat of the Conference. Finally, Portugal SB13 wants to address a special thank to CIB, UNEP, FIDIC and iiSBE for their support and wish great success for all the other SB13 events that are taking place all over the world