New Fault Tolerant Multicast Routing Techniques to Enhance Distributed-Memory Systems Performance

Distributed-memory systems are a key to achieve high performance computing and the most favorable architectures used in advanced research problems. Mesh connected multicomputer are one of the most popular architectures that have been implemented in many distributed-memory systems. These systems must support communication operations efficiently to achieve good performance. The wormhole switching technique has been widely used in design of distributed-memory systems in which the packet is divided into small flits. Also, the multicast communication has been widely used in distributed-memory systems which is one source node sends the same message to several destination nodes. Fault tolerance refers to the ability of the system to operate correctly in the presence of faults. Development of fault tolerant multicast routing algorithms in 2D mesh networks is an important issue. This dissertation presents, new fault tolerant multicast routing algorithms for distributed-memory systems performance using wormhole routed 2D mesh. These algorithms are described for fault tolerant routing in 2D mesh networks, but it can also be extended to other topologies. These algorithms are a combination of a unicast-based multicast algorithm and tree-based multicast algorithms. These algorithms works effectively for the most commonly encountered faults in mesh networks, f-rings, f-chains and concave fault regions. It is shown that the proposed routing algorithms are effective even in the presence of a large number of fault regions and large size of fault region. These algorithms are proved to be deadlock-free. Also, the problem of fault regions overlap is solved. Four essential performance metrics in mesh networks will be considered and calculated; also these algorithms are a limited-global-information-based multicasting which is a compromise of local-information-based approach and global-information-based approach. Data mining is used to validate the results and to enlarge the sample. The proposed new multicast routing techniques are used to enhance the performance of distributed-memory systems. Simulation results are presented to demonstrate the efficiency of the proposed algorithms

Multiprocessor system design tutor : expert system approach

To increase computational bandwidth and system resilience, integration of several microprocessors in a single system becomes necessary. The overall throughput and efficiency of such a system is directly dependent on the hardware and software interconnection supported by the basic microprocessor chip. Sometimes it becomes difficult to put together all the information for design criteria and all the design related formulas. The approach made here is to continuously update the hardware and software information in the database related to a given microprocessor. This information can be accessed at any time for efficient design solution. Intel 80386 and Motorola 68020 microprocessors are reviewed in detail and all the information is stored in a database. The above approach has been implemented in the Multiprocessor System Design - Tutor (MSDT) using the Informix relational database management system. MSDT is a menu driven system implemented to help the system design engineers. MSDT stores and maintains information related to multiprocessor system design, which includes multiprocessor system requirements, microprocessor characteristics, the role of microprocessor in multiprocessor system design and interconnection network configurations and their performance factors. This information is presented to the user via the screen building utility of Informix-4GL; the user can also get a hard copy of all the information within the database by running the report generation utility. MSDT also has security password protection. The system has a good help facility available for the design process. At any given time the user can update the data in the table using this menu driven system. The system is intended to grow into a complete evaluation system based on the Informix-4GL. It is developed on the basis of Fourth Generation Language which has a screen building utility, a menu building utility, a report writer and a window manager. This system will suggest the candidate microprocessor and suitable support chips and interconnection techniques for different applications

Low interference routing for wireless ad-hoc networks

In this thesis the primary focus is on the problem of interference between messages. The thesis discusses why the messages are blocked in a system? How adding a message impacts the cost of all other available links, which can be established in the system. This thesis analyzes how the availability of channels, increase in number of nodes and increase in the transmission range help in increasing the number of messages that can be handled in the network. It is also analyzes how critical is the selection of the maximum transmission range MTR, transmission range TR and required transmission range RTR. Therefore, the focus is on the method of tagging or evaluation of cost for developing any communication link between two nodes. The thesis proposes a system of evaluation of cost of each link and then utilizes the standard Dijikstra\u27 s algorithm to evaluate the cost of each message route from its source to its destination. Chapter 2 explains the proposed algorithms with examples and the way to evaluate the cost of the links, subsequently Chapter 3 discusses the actual simulation environment, the cost matrix, distance matrix and the comparison of various selections of number of nodes in the system (N), maximum transmission range (MTR) and the number of available channels for each node (Ch)

Cost Effective Routing Implementations for On-chip Networks

Arquitecturas de múltiples núcleos como multiprocesadores (CMP) y soluciones multiprocesador para sistemas dentro del chip (MPSoCs) actuales se basan en la eficacia de las redes dentro del chip (NoC) para la comunicación entre los diversos núcleos. Un diseño eficiente de red dentro del chip debe ser escalable y al mismo tiempo obtener valores ajustados de área, latencia y consumo de energía. Para diseños de red dentro del chip de propósito general se suele usar topologías de malla 2D ya que se ajustan a la distribución del chip. Sin embargo, la aparición de nuevos retos debe ser abordada por los diseñadores. Una mayor probabilidad de defectos de fabricación, la necesidad de un uso optimizado de los recursos para aumentar el paralelismo a nivel de aplicación o la necesidad de técnicas eficaces de ahorro de energía, puede ocasionar patrones de irregularidad en las topologías. Además, el soporte para comunicación colectiva es una característica buscada para abordar con eficacia las necesidades de comunicación de los protocolos de coherencia de caché. En estas condiciones, un encaminamiento eficiente de los mensajes se convierte en un reto a superar. El objetivo de esta tesis es establecer las bases de una nueva arquitectura para encaminamiento distribuido basado en lógica que es capaz de adaptarse a cualquier topología irregular derivada de una estructura de malla 2D, proporcionando así una cobertura total para cualquier caso resultado de soportar los retos mencionados anteriormente. Para conseguirlo, en primer lugar, se parte desde una base, para luego analizar una evolución de varios mecanismos, y finalmente llegar a una implementación, que abarca varios módulos para alcanzar el objetivo mencionado anteriormente. De hecho, esta última implementación tiene por nombre eLBDR (effective Logic-Based Distributed Routing). Este trabajo cubre desde el primer mecanismo, LBDR, hasta el resto de mecanismos que han surgido progresivamente.Rodrigo Mocholí, S. (2010). Cost Effective Routing Implementations for On-chip Networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/8962Palanci

SpiNNaker: Fault tolerance in a power- and area- constrained large-scale neuromimetic architecture

AbstractSpiNNaker is a biologically-inspired massively-parallel computer designed to model up to a billion spiking neurons in real-time. A full-fledged implementation of a SpiNNaker system will comprise more than 105 integrated circuits (half of which are SDRAMs and half multi-core systems-on-chip). Given this scale, it is unavoidable that some components fail and, in consequence, fault-tolerance is a foundation of the system design. Although the target application can tolerate a certain, low level of failures, important efforts have been devoted to incorporate different techniques for fault tolerance. This paper is devoted to discussing how hardware and software mechanisms collaborate to make SpiNNaker operate properly even in the very likely scenario of component failures and how it can tolerate system-degradation levels well above those expected

Configuration as well asPerformance of an On-Chip IncarnationArrangement for Multiprocessor System-On-Chip

The novel on-chip coordinate in silicon indicated course of action to fortify ensured development change in multiprocessor SOC applications. A pipelined circuit-exchanging Employed in the proposed structure with FIFO strategy converged with a multistage system topology in segment way setup game plan. The runtime course strategy connected with by part way setup plan for subjective development changes adjacent the Error Correction Block (ECB). The circuit-exchanging technique offers the permuted information and its humbler overhead draws in the upside of stacking various structures in framework on chip. A CMOS test-chip with 0.13m insists the sound judgment and gainfulness of the proposed outline. The indicated exploratory result in the proposed on-chip system accomplishes 1.9x to 8.2x diminishment of silicon overhead emerged from other setup approaches

Design Space Exploration for MPSoC Architectures

Multiprocessor system-on-chip (MPSoC) designs utilize the available technology and communication architectures to meet the requirements of the upcoming applications. In MPSoC, the communication platform is both the key enabler, as well as the key differentiator for realizing efficient MPSoCs. It provides product differentiation to meet a diverse, multi-dimensional set of design constraints, including performance, power, energy, reconfigurability, scalability, cost, reliability and time-to-market. The communication resources of a single interconnection platform cannot be fully utilized by all kind of applications, such as the availability of higher communication bandwidth for computation but not data intensive applications is often unfeasible in the practical implementation. This thesis aims to perform the architecture-level design space exploration towards efficient and scalable resource utilization for MPSoC communication architecture. In order to meet the performance requirements within the design constraints, careful selection of MPSoC communication platform, resource aware partitioning and mapping of the application play important role. To enhance the utilization of communication resources, variety of techniques such as resource sharing, multicast to avoid re-transmission of identical data, and adaptive routing can be used. For implementation, these techniques should be customized according to the platform architecture. To address the resource utilization of MPSoC communication platforms, variety of architectures with different design parameters and performance levels, namely Segmented bus (SegBus), Network-on-Chip (NoC) and Three-Dimensional NoC (3D-NoC), are selected. Average packet latency and power consumption are the evaluation parameters for the proposed techniques. In conventional computing architectures, fault on a component makes the connected fault-free components inoperative. Resource sharing approach can utilize the fault-free components to retain the system performance by reducing the impact of faults. Design space exploration also guides to narrow down the selection of MPSoC architecture, which can meet the performance requirements with design constraints.Siirretty Doriast

Literature Review For Networking And Communication Technology

Report documents the results of a literature search performed in the area of networking and communication technology

Performance modelling and high performance buffer design for the system with network on chip

High performance novel dynamically allocated multi-queue (DAMQ) buffer schemes forsystems with network on chip (NoC) have been proposed and evaluated in this dissertation. Ananalytical model to predict performance of a NoC where wormhole switching technique andfully adaptive routing protocols has been developed and compared with simulations.In this dissertation, a novel analytical model for NoC which makes use of simple closeform calculations is presented. This model provides accurate network performance prediction inthe network stable region. The validity of this model is demonstrated by comparing analyticalprediction with simulation results obtained on high-radix k-ary 2-cube networks.Three novel switch buffer schemes, DAMQall, DAMQmin and DAMQshared, for system onchip with an interconnection network are also reported. The proposed schemes are based on aDAMQ self-compacting buffer hardware design. These schemes outperform existing approaches.DAMQall have similar performance using only half of the buffer size used in traditional SAMQimplementations. DAMQmin provides an excellent approach to optimize buffer managementproviding a good throughput when the network has a larger load. DAMQshared scheme lets virtualchannels from different physical channel share free buffer space. While providing similarperformance, DAMQshared scheme uses only around sixty percent of the buffer size that is used intraditional implementation for NoCs. In addition, using same size buffers, DAMQsharedoutperforms existing approaches such as SAMQ and DAMQall by 1% to 2% in throughput. Theproposed schemes also make a better utilization of the available buffer space