A Survey on Low-Power GNSS

With the miniaturization of electronics, Global Navigation Satellite Systems (GNSS) receivers are getting more and more embedded into devices with harsh energy constraints. This process has led to new signal processing challenges due to the limited processing power on battery-operated devices and to challenging wireless environments, such as deep urban canyons, tunnels and bridges, forest canopies, increased jamming and spoofing. The latter is typically tackled via new GNSS constellations and modernization of the GNSS signals. However, the increase in signal complexity leads to higher computation requirements to recover the signals; thus, the trade-off between precision and energy should be evaluated for each application. This paper dives into low-power GNSS, focusing on the energy consumption of satellite-based positioning receivers used in battery-operated consumer devices and Internet of Things (IoT) sensors. We briefly overview the GNSS basics and the differences between legacy and modernized signals. Factors dominating the energy consumption of GNSS receivers are then reviewed, with special attention given to the complexity of the processing algorithms. Onboard and offloaded (Cloud/Edge) processing strategies are explored and compared. Finally, we highlight the current challenges of today’s research in low-power GNSS.Peer reviewe

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

Proceedings of the Fifth International Mobile Satellite Conference 1997

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial communications services. While previous International Mobile Satellite Conferences have concentrated on technical advances and the increasing worldwide commercial activities, this conference focuses on the next generation of mobile satellite services. The approximately 80 papers included here cover sessions in the following areas: networking and protocols; code division multiple access technologies; demand, economics and technology issues; current and planned systems; propagation; terminal technology; modulation and coding advances; spacecraft technology; advanced systems; and applications and experiments

Investigation into a GPS time pulse radiator for testing time-stamp accuracy of a radio telescope

The MeerKAT radio telescope in South Africa is required to tag the arrival time of a signal to within 10 ns of Coordinated Universal Time (UTC). The telescope has a local atomic clock ensemble and uses satellite based remote clock comparison techniques to compare the telescope time to UTC. The master clock timing edge is distributed to each telescope antenna via an optical fibre precise time transfer. Although the timing accuracy of the telescope time was measured internally by the telescope, there is a need for an independent method to verify how well each antenna and its associated processing stages are aligned to UTC. A portable GNSS time-pulse radiator (GTR) device for testing the time-stamp accuracy was developed. The GTR was calibrated at the National Metrology Institute of South Africa and laboratory characterisation tests measured its RF timing pulse to be 1.32 ± 0.100 µs ahead of the UTC second. The telescope’s time and frequency reference clock ensemble consists of two hydrogen masers, an ultrastable crystal and GPS disciplined Rubidium clocks. During operation, the GTR radiates a broadband GPS time synchronised RF timing signal at a known distance from the telescope antennas and the corresponding timestamps were compared to the expected value. Recent GTR timing tests performed on one of the MeerKAT antennas showed that the telescope’s generated timestamps associated with the GTR’s RF timing signal coincided with the expected delay of approximately 16 ± 0.1 µs measured from an antenna 4.8 km away from the telescope’s master clock transmitter. Ultimately we used the GTR to verify that the telescope time and UTC were aligned to within 100 ns. Future work is planned to improve the profile of the transmitted signal and timing critical hardware in order to reduce the GTR’s error budget

TDRSS telecommunications study. Phase 1: Final report

A parametric analysis of the telecommunications support capability of the Tracking and Data Relay Satellite System (TDRSS) was performed. Emphasis was placed on maximizing support capability provided to the user while minimizing impact on the user spacecraft. This study evaluates the present TDRSS configuration as presented in the TDRSS Definition Phase Study Report, December 1973 to determine potential changes for improving the overall performance. In addition, it provides specifications of the user transponder equipment to be used in the TDRSS

Study of efficient transmission and reception of image-type data using millimeter waves

Evaluation of signal processing and modulation techniques for transmission and reception of image type data via millimeter wave relay satellite