SAR-Based Vibration Estimation Using the Discrete Fractional Fourier Transform

A vibration estimation method for synthetic aperture radar (SAR) is presented based on a novel application of the discrete fractional Fourier transform (DFRFT). Small vibrations of ground targets introduce phase modulation in the SAR returned signals. With standard preprocessing of the returned signals, followed by the application of the DFRFT, the time-varying accelerations, frequencies, and displacements associated with vibrating objects can be extracted by successively estimating the quasi-instantaneous chirp rate in the phase-modulated signal in each subaperture. The performance of the proposed method is investigated quantitatively, and the measurable vibration frequencies and displacements are determined. Simulation results show that the proposed method can successfully estimate a two-component vibration at practical signal-to-noise levels. Two airborne experiments were also conducted using the Lynx SAR system in conjunction with vibrating ground test targets. The experiments demonstrated the correct estimation of a 1-Hz vibration with an amplitude of 1.5 cm and a 5-Hz vibration with an amplitude of 1.5 mm

SimHumalator: An Open Source End-to-End Radar Simulator For Human Activity Recognition

Radio-frequency based non-cooperative monitor ing of humans has numerous applications ranging from law enforcement to ubiquitous sensing applications such as ambient assisted living and bio-medical applications for non-intrusively monitoring patients. Large training datasets, almost unlimited memory capacity, and ever- increasing processing speeds of computers could drive forward the data- driven deep-learning focused research in the above applications. However, generating and labeling large volumes of high-quality, diverse radar datasets is an onerous task. Furthermore, unlike the fields of vision and image processing, the radar community has limited access to databases that contain large volumes of experimental data. Therefore, in this article, we present an open-source motion capture data-driven simulation tool, SimHumalator, that can generate large volumes of human micro-Doppler radar data in passive WiFi scenarios. The simulator integrates IEEE 802.11 WiFi standard(IEEE 802.11g, n, and ad) compliant transmissions with the human animation data to generate the micro-Doppler features that incorporate the diversity of human motion characteristics and the sensor parameters. The simulated signatures have been validated with experimental data gathered using an in-house-built hardware prototype. This article describes simulation methodology in detail and provides case studies on the feasibility of using simulated micro-Doppler spectrograms for data augmentation tasks

Augmenting Experimental Data with Simulations to Improve Activity Classification in Healthcare Monitoring

Human micro-Doppler signatures in most passive WiFi radar (PWR) scenarios are captured through real-world measurements using various hardware platforms. However, gathering large volumes of high quality and diverse real radar datasets has always been an expensive and laborious task. This work presents an open-source motion capture data-driven simulation tool SimHumalator that is able to generate human microDoppler radar data in PWR scenarios. We qualitatively compare the micro-Doppler signatures generated through SimHumalator with the measured real signatures. Here, we present the use of SimHumalator to simulate a set of human actions. We demonstrate that augmenting a measurement database with simulated data, using SimHumalator, results in an 8% improvement in classification accuracy. Our results suggest that simulation data can be used to augment experimental datasets of limited volume to address the cold-start problem typically encountered in radar research

Index to 1984 NASA Tech Briefs, volume 9, numbers 1-4

Short announcements of new technology derived from the R&D activities of NASA are presented. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This index for 1984 Tech B Briefs contains abstracts and four indexes: subject, personal author, originating center, and Tech Brief Number. The following areas are covered: electronic components and circuits, electronic systems, physical sciences, materials, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences

A Short-Range FMCW Radar-Based Approach for Multi-Target Human-Vehicle Detection

In this article, a new microwave-radar-based technique for short-range detection and classification of multiple human and vehicle targets crossing a monitored area is proposed. This approach, which can find applications in both security and infrastructure surveillance, relies upon the processing of the scattered-field data acquired by low-cost off-The-shelf components, i.e., a 24 GHz frequency-modulated continuous wave (FMCW) radar module and a Raspberry Pi mini-PC. The developed method is based on an ad hoc processing chain to accomplish the automatic target recognition (ATR) task, which consists of blocks performing clutter and leakage removal with an infinite impulse response (IIR) filter, clustering with a density-based spatial clustering of applications with noise (DBSCAN) approach, tracking using a Benedict-Bordner $alpha$-$eta$ filter, features extraction, and finally classification of targets by means of a $k$-nearest neighbor ( $k$-NN) algorithm. The approach is validated in real experimental scenarios, showing its capabilities in correctly detecting multiple targets belonging to different classes (i.e., pedestrians, cars, motorcycles, and trucks)

A Study of clutter reduction techniques in wide bandwidth HF/VHF deep ground penetrating radar

Reducing clutter is one of the most daunting problems a radar processing engineer faces. Clutter causes a significant problem when attempting to detect sub-surface targets, as any significant change in the ground dielectric will produce a return at the receiver. The difficulty in reducing the clutter is compounded by the fact that the spectral characteristics of the clutter are similar to that of the target. While there are many methods that exist to reduce clutter, few do not require a priori information of either the target or the clutter. There are applications, of interest to the electromagnetic community, that are restricted in the amount of a priori information available to them. Estimation-subtraction filters calculate an estimate of the clutter from the statistics of the data collected and subtract that estimate from the original data. The Wiener filter has long been used as a way to suppress noise signals when a target reference is known. Using it to reduce clutter is a relatively new area of research. This research proposes estimation-subtraction filters and an application of the Wiener filter, which do not require a priori information to reduce the clutter of a bi-static synthetic aperture based, wideband deep ground penetrating radar system. The results of applying these filters to data collected in this way, at these depths, are illustrated here for the first time

Synthetic Aperture Radar (SAR) Meets Deep Learning

This reprint focuses on the application of the combination of synthetic aperture radars and depth learning technology. It aims to further promote the development of SAR image intelligent interpretation technology. A synthetic aperture radar (SAR) is an important active microwave imaging sensor, whose all-day and all-weather working capacity give it an important place in the remote sensing community. Since the United States launched the first SAR satellite, SAR has received much attention in the remote sensing community, e.g., in geological exploration, topographic mapping, disaster forecast, and traffic monitoring. It is valuable and meaningful, therefore, to study SAR-based remote sensing applications. In recent years, deep learning represented by convolution neural networks has promoted significant progress in the computer vision community, e.g., in face recognition, the driverless field and Internet of things (IoT). Deep learning can enable computational models with multiple processing layers to learn data representations with multiple-level abstractions. This can greatly improve the performance of various applications. This reprint provides a platform for researchers to handle the above significant challenges and present their innovative and cutting-edge research results when applying deep learning to SAR in various manuscript types, e.g., articles, letters, reviews and technical reports

Detection of Dispersed Radio Pulses: A machine learning approach to candidate identification and classification

Searching for extraterrestrial, transient signals in astronomical data sets is an active area of current research. However, machine learning techniques are lacking in the literature concerning single-pulse detection. This paper presents a new, two-stage approach for identifying and classifying dispersed pulse groups (DPGs) in single-pulse search output. The first stage identified DPGs and extracted features to characterize them using a new peak identification algorithm which tracks sloping tendencies around local maxima in plots of signal-to-noise ratio vs. dispersion measure. The second stage used supervised machine learning to classify DPGs. We created four benchmark data sets: one unbalanced and three balanced versions using three different imbalance treatments.We empirically evaluated 48 classifiers by training and testing binary and multiclass versions of six machine learning algorithms on each of the four benchmark versions. While each classifier had advantages and disadvantages, all classifiers with imbalance treatments had higher recall values than those with unbalanced data, regardless of the machine learning algorithm used. Based on the benchmarking results, we selected a subset of classifiers to classify the full, unlabelled data set of over 1.5 million DPGs identified in 42,405 observations made by the Green Bank Telescope. Overall, the classifiers using a multiclass ensemble tree learner in combination with two oversampling imbalance treatments were the most efficient; they identified additional known pulsars not in the benchmark data set and provided six potential discoveries, with significantly less false positives than the other classifiers.Comment: 13 pages, accepted for publication in MNRAS, ref. MN-15-1713-MJ.R

On the classifier performance for simulation based debris detection in sar imagery

Urban areas struck by disasters such as earthquakes are in need of a fast damage detection assessment. A post-event SAR image often is the first available image, most likely with no matching pre-event image to perform change detection. In previous work we have introduced a debris detection algorithm for this scenario that is trained exclusively with synthetically generated training data. A classification step is employed to separate debris from similar textures such as vegetation. In order to verify the use of a random forest classifier for this context, we conduct a performance comparison with two alternative popular classifiers, a support vector machine and a convolutional neural network. With the direct comparison revealing the random forest classifier to be best suited, the effective performance on the prospect of debris detection is investigated for the post-earthquake Christchurch scene. Results show a good separation of debris from vegetation and gravel, thus reducing the false alarm rate in the damage detection operation considerably