5,430 research outputs found

    Ageing and embedded instrument monitoring of analogue/mixed-signal IPS

    Get PDF

    Simulation of charge-trapping in nano-scale MOSFETs in the presence of random-dopants-induced variability

    Get PDF
    The growing variability of electrical characteristics is a major issue associated with continuous downscaling of contemporary bulk MOSFETs. In addition, the operating conditions brought about by these same scaling trends have pushed MOSFET degradation mechanisms such as Bias Temperature Instability (BTI) to the forefront as a critical reliability threat. This thesis investigates the impact of this ageing phenomena, in conjunction with device variability, on key MOSFET electrical parameters. A three-dimensional drift-diffusion approximation is adopted as the simulation approach in this work, with random dopant fluctuations—the dominant source of statistical variability—included in the simulations. The testbed device is a realistic 35 nm physical gate length n-channel conventional bulk MOSFET. 1000 microscopically different implementations of the transistor are simulated and subjected to charge-trapping at the oxide interface. The statistical simulations reveal relatively rare but very large threshold voltage shifts, with magnitudes over 3 times than that predicted by the conventional theoretical approach. The physical origin of this effect is investigated in terms of the electrostatic influences of the random dopants and trapped charges on the channel electron concentration. Simulations with progressively increased trapped charge densities—emulating the characteristic condition of BTI degradation—result in further variability of the threshold voltage distribution. Weak correlations of the order of 10-2 are found between the pre-degradation threshold voltage and post-degradation threshold voltage shift distributions. The importance of accounting for random dopant fluctuations in the simulations is emphasised in order to obtain qualitative agreement between simulation results and published experimental measurements. Finally, the information gained from these device-level physical simulations is integrated into statistical compact models, making the information available to circuit designers

    Two dimensional quantum and reliability modelling for lightly doped nanoscale devices

    Get PDF
    The downscaling of MOSFET devices leads to well-studied short channel effects and more complex quantum mechanical effects. Both quantum and short channel effects not only alter the performance but they also affect the reliability. This continued scaling of the MOS device gate length puts a demand on the reduction of the gate oxide thickness and the substrate doping density. Quantum mechanical effects give rise to the quantization of energy in the conduction band, which consequently creates a larger effective bandgap and brings a displacement of the inversion layer charge out of the Si/SiO2 interface. Such a displacement of charge is equivalent to an increase in the effective oxide layer thickness, a growth in the threshold voltage, and a decrease in the current level. Therefore, using the classical analysis approach without including the quantum effects may lead to perceptible errors in the prognosis of the performance of modern deep submicron devices. In this work, compact Verilog-A compatible 2D models including quantum short channel effects and confinement for the potential, threshold voltage, and the carrier charge sheet density for symmetrical lightly doped double-gate MOSFETs are developed. The proposed models are not only applicable to ultra-scaled devices but they have also been derived from analytical 2D Poisson and 1D Schrodinger equations including 2D electrostatics, in order to incorporate quantum mechanical effects. Electron and hole quasi-Fermi potential effects were considered. The models were further enhanced to include negative bias temperature instability (NBTI) in order to assess the reliability of the device. NBTI effects incorporated into the models constitute interface state generation and hole-trapping. The models are continuous and have been verified by comparison with COMSOL and BALMOS numerical simulations for channel lengths down to 7nm; very good agreement within ±5% has been observed for silicon thicknesses ranging from 3nm to 20nm at 1 GHz operation after 10 years

    Aging-Aware Design Methods for Reliable Analog Integrated Circuits using Operating Point-Dependent Degradation

    Get PDF
    The focus of this thesis is on the development and implementation of aging-aware design methods, which are suitable to satisfy current needs of analog circuit design. Based on the well known \gm/\ID sizing methodology, an innovative tool-assisted aging-aware design approach is proposed, which is able to estimate shifts in circuit characteristics using mostly hand calculation schemes. The developed concept of an operating point-dependent degradation leads to the definition of an aging-aware sensitivity, which is compared to currently available degradation simulation flows and proves to be efficient in the estimation of circuit degradation. Using the aging-aware sensitivity, several analog circuits are investigated and optimized towards higher reliability. Finally, results are presented for numerous target specifications

    When self-consistency makes a difference

    Get PDF
    Compound semiconductor power RF and microwave device modeling requires, in many cases, the use of selfconsistent electrothermal equivalent circuits. The slow thermal dynamics and the thermal nonlinearity should be accurately included in the model; otherwise, some response features subtly related to the detailed frequency behavior of the slow thermal dynamics would be inaccurately reproduced or completely distorted. In this contribution we show two examples, concerning current collapse in HBTs and modeling of IMPs in GaN HEMTs. Accurate thermal modeling is proved to be be made compatible with circuit-oriented CAD tools through a proper choice of system-level approximations; in the discussion we exploit a Wiener approach, but of course the strategy should be tailored to the specific problem under consideratio

    Characterization and Modeling of the Threshold Voltage Instability in p-Gate GaN HEMTs

    Get PDF
    The p-gate GaN HEMT is a modern power semiconductor transistor capable of overcoming the switching speed limitation of conventional Silicon-based technologies. However, the GaN HEMT is a fairly new technology that still suffers undesired effects that affect its operation. Nowadays, the most prominent effects are the shift and instability of the threshold voltage Vth, caused by capacitive coupling into the gate stack as well as trapping, accumulation, and depletion of carriers. In this study, an experimental characterization of the Vth behavior is executed and subsequently used to develop a physically-based compact model. For this purpose, a custom setup is developed capable of high-resolution transient measurements for pulse lengths ranging from 100 ns up to 100 s. Utilizing the setup, commercially available state-of-the-art p-gate GaN HEMTs are investigated, showing a Vth shift and instability that appears relevant up to the nominal operation. The experimental results show that the drain-source voltage VDS yields a Vth shift, which, when applied for long durations (e.g., during off-state), leads to an additional Vth instability. The gate-source voltage VGS also yields significant Vth instabilities, which correlate with the VDS-induced effects. Furthermore, the driving conditions causing an impact on Vth appear to also correlate with the devices’ short-circuit capability and degradation. However, no available models cover the Vth behavior, which is necessary to predict their impact and reliability concerns. Consequently, a compact model is developed based on the surface potential for the drain path, extended by the conduction mechanisms covering the gate path. Finally, the Vth shift is modeled based on capacitive coupling into the gate, while for the Vth instabilities, a possible implementation is exemplified for the impact of VDS

    Study Of Nanoscale Cmos Device And Circuit Reliability

    Get PDF
    The development of semiconductor technology has led to the significant scaling of the transistor dimensions -The transistor gate length drops down to tens of nanometers and the gate oxide thickness to 1 nm. In the future several years, the deep submicron devices will dominate the semiconductor industry for the high transistor density and the corresponding performance enhancement. For these devices, the reliability issues are the first concern for the commercialization. The major reliability issues caused by voltage and/or temperature stress are gate oxide breakdown (BD), hot carrier effects (HCs), and negative bias temperature instability (NBTI). They become even more important for the nanoscale CMOS devices, because of the high electrical field due to the small device size and high temperature due to the high transistor densities and high-speed performances. This dissertation focuses on the study of voltage and temperature stress-induced reliability issues in nanoscale CMOS devices and circuits. The physical mechanisms for BD, HCs, and NBTI have been presented. A practical and accurate equivalent circuit model for nanoscale devices was employed to simulate the RF performance degradation in circuit level. The parameter measurement and model extraction have been addressed. Furthermore, a methodology was developed to predict the HC, TDDB, and NBTI effects on the RF circuits with the nanoscale CMOS. It provides guidance for the reliability considerations of the RF circuit design. The BD, HC, and NBTI effects on digital gates and RF building blocks with the nanoscale devices low noise amplifier, oscillator, mixer, and power amplifier, have been investigated systematically. The contributions of this dissertation include: It provides a thorough study of the reliability issues caused by voltage and/or temperature stresses on nanoscale devices from device level to circuit level; The more real voltage stress case high frequency (900 MHz) dynamic stress, has been first explored and compared with the traditional DC stress; A simple and practical analytical method to predict RF performance degradation due to voltage stress in the nanoscale devices and RF circuits was given based on the normalized parameter degradations in device models. It provides a quick way for the designers to evaluate the performance degradations; Measurement and model extraction technologies, special for the nanoscale MOSFETs with ultra-thin, ultra-leaky gate oxide, were addressed and employed for the model establishments; Using the present existing computer-aided design tools (Cadence, Agilent ADS) with the developed models for performance degradation evaluation due to voltage or/and temperature stress by simulations provides a potential way that industry could use to save tens of millions of dollars annually in testing costs. The world now stands at the threshold of the age of nanotechnology, and scientists and engineers have been exploring here for years. The reliability is the first challenge for the commercialization of the nanoscale CMOS devices, which will be further downscaling into several tens or ten nanometers. The reliability is no longer the post-design evaluation, but the pre-design consideration. The successful and fruitful results of this dissertation, from device level to circuit level, provide not only an insight on how the voltage and/or temperature stress effects on the performances, but also methods and guidance for the designers to achieve more reliable circuits with nanoscale MOSFETs in the future

    Phase Noise Analyses and Measurements in the Hybrid Memristor-CMOS Phase-Locked Loop Design and Devices Beyond Bulk CMOS

    Get PDF
    Phase-locked loop (PLLs) has been widely used in analog or mixed-signal integrated circuits. Since there is an increasing market for low noise and high speed devices, PLLs are being employed in communications. In this dissertation, we investigated phase noise, tuning range, jitter, and power performances in different architectures of PLL designs. More energy efficient devices such as memristor, graphene, transition metal di-chalcogenide (TMDC) materials and their respective transistors are introduced in the design phase-locked loop. Subsequently, we modeled phase noise of a CMOS phase-locked loop from the superposition of noises from its building blocks which comprises of a voltage-controlled oscillator, loop filter, frequency divider, phase-frequency detector, and the auxiliary input reference clock. Similarly, a linear time-invariant model that has additive noise sources in frequency domain is used to analyze the phase noise. The modeled phase noise results are further compared with the corresponding phase-locked loop designs in different n-well CMOS processes. With the scaling of CMOS technology and the increase of the electrical field, the problem of short channel effects (SCE) has become dominant, which causes decay in subthreshold slope (SS) and positive and negative shifts in the threshold voltages of nMOS and pMOS transistors, respectively. Various devices are proposed to continue extending Moore\u27s law and the roadmap in semiconductor industry. We employed tunnel field effect transistor owing to its better performance in terms of SS, leakage current, power consumption etc. Applying an appropriate bias voltage to the gate-source region of TFET causes the valence band to align with the conduction band and injecting the charge carriers. Similarly, under reverse bias, the two bands are misaligned and there is no injection of carriers. We implemented graphene TFET and MoS2 in PLL design and the results show improvements in phase noise, jitter, tuning range, and frequency of operation. In addition, the power consumption is greatly reduced due to the low supply voltage of tunnel field effect transistor

    Transistor Degradations in Very Large-Scale-Integrated CMOS Technologies

    Get PDF
    The historical evolution of hot carrier degradation mechanisms and their physical models are reviewed and an energy-driven hot carrier aging model is verified that can reproduce 62-nm-gate-long hot carrier degradation of transistors through consistent aging-parameter extractions for circuit simulation. A long-term hot carrier-resistant circuit design can be realized via optimal driver strength controls. The central role of the V GS ratio is emphasized during practical case studies on CMOS inverter chains and a dynamic random access memory (DRAM) word-line circuit. Negative bias temperature instability (NBTI) mechanisms are also reviewed and implemented in a hydrogen reaction-diffusion (R-D) framework. The R-D simulation reproduces time-dependent NBTI degradations interpreted into interface trap generation, Δ N it with a proper power-law dependency on time. The experimental evidence of pre-existing hydrogen-induced Si–H bond breakage is also proven by the quantifying R-D simulation. From this analysis, a low-pressure end-of-line (EOL) anneal can reduce the saturation level of NBTI degradation, which is believed to be caused by the outward diffusion of hydrogen from the gate regions and therefore prevents further breakage of Si–H bonds in the silicon-oxide interfaces
    corecore