Flexible Rollback Recovery in Dynamic Heterogeneous Grid Computing

Abstract—Large applications executing on Grid or cluster architectures consisting of hundreds or thousands of computational nodes create problems with respect to reliability. The source of the problems are node failures and the need for dynamic configuration over extensive runtime. This paper presents two fault-tolerance mechanisms called Theft-Induced Checkpointing and Systematic Event Logging. These are transparent protocols capable of overcoming problems associated with both benign faults, i.e., crash faults, and node or subnet volatility. Specifically, the protocols base the state of the execution on a dataflow graph, allowing for efficient recovery in dynamic heterogeneous systems as well as multithreaded applications. By allowing recovery even under different numbers of processors, the approaches are especially suitable for applications with a need for adaptive or reactionary configuration control. The low-cost protocols offer the capability of controlling or bounding the overhead. A formal cost model is presented, followed by an experimental evaluation. It is shown that the overhead of the protocol is very small, and the maximum work lost by a crashed process is small and bounded. Index Terms—Grid computing, rollback recovery, checkpointing, event logging. Ç

Checkpointing of parallel applications in a Grid environment

The Grid environment is generic, heterogeneous, and dynamic with lots of unreliable resources making it very exposed to failures. The environment is unreliable because it is geographically dispersed involving multiple autonomous administrative domains and it is composed of a large number of components. Examples of failures in the Grid environment can be: application crash, Grid node crash, network failures, and Grid system component failures. These types of failures can affect the execution of parallel/distributed application in the Grid environment and so, protections against these faults are crucial. Therefore, it is essential to develop efficient fault tolerant mechanisms to allow users to successfully execute Grid applications. One of the research challenges in Grid computing is to be able to develop a fault tolerant solution that will ensure Grid applications are executed reliably with minimum overhead incurred. While checkpointing is the most common method to achieve fault tolerance, there is still a lot of work to be done to improve the efficiency of the mechanism. This thesis provides an in-depth description of a novel solution for checkpointing parallel applications executed on a Grid. The checkpointing mechanism implemented allows to checkpoint an application at regions where there is no interprocess communication involved and therefore reducing the checkpointing overhead and checkpoint size

Operating System Support for Redundant Multithreading

Failing hardware is a fact and trends in microprocessor design indicate that the fraction of hardware suffering from permanent and transient faults will continue to increase in future chip generations. Researchers proposed various solutions to this issue with different downsides: Specialized hardware components make hardware more expensive in production and consume additional energy at runtime. Fault-tolerant algorithms and libraries enforce specific programming models on the developer. Compiler-based fault tolerance requires the source code for all applications to be available for recompilation. In this thesis I present ASTEROID, an operating system architecture that integrates applications with different reliability needs. ASTEROID is built on top of the L4/Fiasco.OC microkernel and extends the system with Romain, an operating system service that transparently replicates user applications. Romain supports single- and multi-threaded applications without requiring access to the application's source code. Romain replicates applications and their resources completely and thereby does not rely on hardware extensions, such as ECC-protected memory. In my thesis I describe how to efficiently implement replication as a form of redundant multithreading in software. I develop mechanisms to manage replica resources and to make multi-threaded programs behave deterministically for replication. I furthermore present an approach to handle applications that use shared-memory channels with other programs. My evaluation shows that Romain provides 100% error detection and more than 99.6% error correction for single-bit flips in memory and general-purpose registers. At the same time, Romain's execution time overhead is below 14% for single-threaded applications running in triple-modular redundant mode. The last part of my thesis acknowledges that software-implemented fault tolerance methods often rely on the correct functioning of a certain set of hardware and software components, the Reliable Computing Base (RCB). I introduce the concept of the RCB and discuss what constitutes the RCB of the ASTEROID system and other fault tolerance mechanisms. Thereafter I show three case studies that evaluate approaches to protecting RCB components and thereby aim to achieve a software stack that is fully protected against hardware errors

Doctor of Philosophy

dissertationA modern software system is a composition of parts that are themselves highly complex: operating systems, middleware, libraries, servers, and so on. In principle, compositionality of interfaces means that we can understand any given module independently of the internal workings of other parts. In practice, however, abstractions are leaky, and with every generation, modern software systems grow in complexity. Traditional ways of understanding failures, explaining anomalous executions, and analyzing performance are reaching their limits in the face of emergent behavior, unrepeatability, cross-component execution, software aging, and adversarial changes to the system at run time. Deterministic systems analysis has a potential to change the way we analyze and debug software systems. Recorded once, the execution of the system becomes an independent artifact, which can be analyzed offline. The availability of the complete system state, the guaranteed behavior of re-execution, and the absence of limitations on the run-time complexity of analysis collectively enable the deep, iterative, and automatic exploration of the dynamic properties of the system. This work creates a foundation for making deterministic replay a ubiquitous system analysis tool. It defines design and engineering principles for building fast and practical replay machines capable of capturing complete execution of the entire operating system with an overhead of several percents, on a realistic workload, and with minimal installation costs. To enable an intuitive interface of constructing replay analysis tools, this work implements a powerful virtual machine introspection layer that enables an analysis algorithm to be programmed against the state of the recorded system through familiar terms of source-level variable and type names. To support performance analysis, the replay engine provides a faithful performance model of the original execution during replay

A proactive fault tolerance framework for high performance computing (HPC) systems in the cloud

High Performance Computing (HPC) systems have been widely used by scientists and researchers in both industry and university laboratories to solve advanced computation problems. Most advanced computation problems are either data-intensive or computation-intensive. They may take hours, days or even weeks to complete execution. For example, some of the traditional HPC systems computations run on 100,000 processors for weeks. Consequently traditional HPC systems often require huge capital investments. As a result, scientists and researchers sometimes have to wait in long queues to access shared, expensive HPC systems. Cloud computing, on the other hand, offers new computing paradigms, capacity, and flexible solutions for both business and HPC applications. Some of the computation-intensive applications that are usually executed in traditional HPC systems can now be executed in the cloud. Cloud computing price model eliminates huge capital investments. However, even for cloud-based HPC systems, fault tolerance is still an issue of growing concern. The large number of virtual machines and electronic components, as well as software complexity and overall system reliability, availability and serviceability (RAS), are factors with which HPC systems in the cloud must contend. The reactive fault tolerance approach of checkpoint/restart, which is commonly used in HPC systems, does not scale well in the cloud due to resource sharing and distributed systems networks. Hence, the need for reliable fault tolerant HPC systems is even greater in a cloud environment. In this thesis we present a proactive fault tolerance approach to HPC systems in the cloud to reduce the wall-clock execution time, as well as dollar cost, in the presence of hardware failure. We have developed a generic fault tolerance algorithm for HPC systems in the cloud. We have further developed a cost model for executing computation-intensive applications on HPC systems in the cloud. Our experimental results obtained from a real cloud execution environment show that the wall-clock execution time and cost of running computation-intensive applications in the cloud can be considerably reduced compared to checkpoint and redundancy techniques used in traditional HPC systems

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application.Postprint (published version

Reliability for exascale computing : system modelling and error mitigation for task-parallel HPC applications

As high performance computing (HPC) systems continue to grow, their fault rate increases. Applications running on these systems have to deal with rates on the order of hours or days. Furthermore, some studies for future Exascale systems predict the rates to be on the order of minutes. As a result, efficient fault tolerance solutions are needed to be able to tolerate frequent failures. A fault tolerance solution for future HPC and Exascale systems must be low-cost, efficient and highly scalable. It should have low overhead in fault-free execution and provide fast restart because long-running applications are expected to experience many faults during the execution. Meanwhile task-based dataflow parallel programming models (PM) are becoming a popular paradigm in HPC applications at large scale. For instance, we see the adaptation of task-based dataflow parallelism in OpenMP 4.0, OmpSs PM, Argobots and Intel Threading Building Blocks. In this thesis we propose fault-tolerance solutions for task-parallel dataflow HPC applications. Specifically, first we design and implement a checkpoint/restart and message-logging framework to recover from errors. We then develop performance models to investigate the benefits of our task-level frameworks when integrated with system-wide checkpointing. Moreover, we design and implement selective task replication mechanisms to detect and recover from silent data corruptions in task-parallel dataflow HPC applications. Finally, we introduce a runtime-based coding scheme to detect and recover from memory errors in these applications. Considering the span of all of our schemes, we see that they provide a fairly high failure coverage where both computation and memory is protected against errors.A medida que los Sistemas de Cómputo de Alto rendimiento (HPC por sus siglas en inglés) siguen creciendo, también las tasas de fallos aumentan. Las aplicaciones que se ejecutan en estos sistemas tienen una tasa de fallos que pueden estar en el orden de horas o días. Además, algunos estudios predicen que los fallos estarán en el orden de minutos en los Sistemas Exascale. Por lo tanto, son necesarias soluciones eficientes para la tolerancia a fallos que puedan tolerar fallos frecuentes. Las soluciones para tolerancia a fallos en los Sistemas futuros de HPC y Exascale tienen que ser de bajo costo, eficientes y altamente escalable. El sobrecosto en la ejecución sin fallos debe ser bajo y también se debe proporcionar reinicio rápido, ya que se espera que las aplicaciones de larga duración experimenten muchos fallos durante la ejecución. Por otra parte, los modelos de programación paralelas basados en tareas ordenadas de acuerdo a sus dependencias de datos, se están convirtiendo en un paradigma popular en aplicaciones HPC a gran escala. Por ejemplo, los siguientes modelos de programación paralela incluyen este tipo de modelo de programación OpenMP 4.0, OmpSs, Argobots e Intel Threading Building Blocks. En esta tesis proponemos soluciones de tolerancia a fallos para aplicaciones de HPC programadas en un modelo de programación paralelo basado tareas. Específicamente, en primer lugar, diseñamos e implementamos mecanismos “checkpoint/restart” y “message-logging” para recuperarse de los errores. Para investigar los beneficios de nuestras herramientas a nivel de tarea cuando se integra con los “system-wide checkpointing” se han desarrollado modelos de rendimiento. Por otra parte, diseñamos e implementamos mecanismos de replicación selectiva de tareas que permiten detectar y recuperarse de daños de datos silenciosos en aplicaciones programadas siguiendo el modelo de programación paralela basadas en tareas. Por último, se introduce un esquema de codificación que funciona en tiempo de ejecución para detectar y recuperarse de los errores de la memoria en estas aplicaciones. Todos los esquemas propuestos, en conjunto, proporcionan una cobertura bastante alta a los fallos tanto si estos se producen el cálculo o en la memoria.Postprint (published version

Compiler assisted chekpointing of message-passing applications in heterogeneous environments

[Resumen] With the evolution of high performance computing towards heterogeneous, massively parallel systems, parallel applications have developed new checkpoint and restart necessities, Whether due to a failure in the execution or to a migration of the processes to different machines, checkpointing tools must be able to operate in heterogeneous environments. However, some of the data manipulated by a parallel application are not truly portable. Examples of these include opaque state (e.g. data structures for communications support) or diversity of interfaces for a single feature (e.g. communications, I/O). Directly manipulating the underlying ad-hoc representations renders checkpointing tools incapable of working on different environments. Portable checkpointers usually work around portability issues at the cost of transparency: the user must provide information such as what data needs to be stored, where to store it, or where to checkpoint. CPPC (ComPiler for Portable Checkpointing) is a checkpointing tool designed to feature both portability and transparency, while preserving the scalability of the executed applications. It is made up of a library and a compiler. The CPPC library contains routines for variable level checkpointing, using portable code and protocols. The CPPC compiler achieves transparency by relieving the user from time-consuming tasks, such as performing code analyses and adding instrumentation code