Polar Coding Schemes for Cooperative Transmission Systems

: In this thesis, a serially-concatenated coding scheme with a polar code as the outer code and a low density generator matrix (LDGM) code as the inner code is firstly proposed. It is shown that that the proposed scheme provides a method to improve significantly the low convergence of polar codes and the high error floor of LDGM codes while keeping the advantages of both such as the low encoding and decoding complexity. The bit error rate results show that the proposed scheme by reasonable design have the potential to approach a performance close to the capacity limit and avoid error floor effectively. Secondly, a novel transmission protocol based on polar coding is proposed for the degraded half-duplex relay channel. In the proposed protocol, the relay only needs to forward a part of the decoded source message that the destination needs according to the exquisite nested structure of polar codes. It is proved that the scheme can achieve the capacity of the half-duplex relay channel while enjoying low encoding/decoding complexity. By modeling the practical system, we verify that the proposed scheme outperforms the conventional scheme designed by low-density parity-check codes by simulations. Finally, a generalized partial information relaying protocol is proposed for degraded multiple-relay networks with orthogonal receiver components (MRN-ORCs). In such a protocol, each relay node decodes the received source message with the help of partial information from previous nodes and re-encodes part of the decoded message for transmission to satisfy the decoding requirements for the following relay node or the destination node. For the design of polar codes, the nested structures are constructed based on this protocol and the information sets corresponding to the partial messages forwarded are also calculated. It is proved that the proposed scheme achieves the theoretical capacity of the degraded MRN-ORCs while still retains the low-complexity feature of polar codes

Cross-layer performance control of wireless channels using active local profiles

To optimize performance of applications running over wireless channels state-of-the-art wireless access technologies incorporate a number of channel adaptation mechanisms. While these mechanisms are expected to operate jointly providing the best possible performance for current wireless channel and traffic conditions, their joint effect is often difficult to predict. To control functionality of various channel adaptation mechanisms a new cross-layer performance optimization system is sought. This system should be responsible for exchange of control information between different layers and further optimization of wireless channel performance. In this paper design of the cross-layer performance control system for wireless access technologies with dynamic adaptation of protocol parameters at different layers of the protocol stack is proposed. Functionalities of components of the system are isolated and described in detail. To determine the range of protocol parameters providing the best possible performance for a wide range of channel and arrival statistics the proposed system is analytically analyzed. Particularly, probability distribution functions of the number of lost frames and delay of a frame as functions of first- and second-order wireless channel and arrival statistics, automatic repeat request, forward error correction functionality, protocol data unit size at different layers are derived. Numerical examples illustrating performance of the whole system and its elements are provided. Obtained results demonstrate that the proposed system provide significant performance gains compared to static configuration of protocols

From Polar to Reed-Muller Codes:Unified Scaling, Non-standard Channels, and a Proven Conjecture

The year 2016, in which I am writing these words, marks the centenary of Claude Shannon, the father of information theory. In his landmark 1948 paper "A Mathematical Theory of Communication", Shannon established the largest rate at which reliable communication is possible, and he referred to it as the channel capacity. Since then, researchers have focused on the design of practical coding schemes that could approach such a limit. The road to channel capacity has been almost 70 years long and, after many ideas, occasional detours, and some rediscoveries, it has culminated in the description of low-complexity and provably capacity-achieving coding schemes, namely, polar codes and iterative codes based on sparse graphs. However, next-generation communication systems require an unprecedented performance improvement and the number of transmission settings relevant in applications is rapidly increasing. Hence, although Shannon's limit seems finally close at hand, new challenges are just around the corner. In this thesis, we trace a road that goes from polar to Reed-Muller codes and, by doing so, we investigate three main topics: unified scaling, non-standard channels, and capacity via symmetry. First, we consider unified scaling. A coding scheme is capacity-achieving when, for any rate smaller than capacity, the error probability tends to 0 as the block length becomes increasingly larger. However, the practitioner is often interested in more specific questions such as, "How much do we need to increase the block length in order to halve the gap between rate and capacity?". We focus our analysis on polar codes and develop a unified framework to rigorously analyze the scaling of the main parameters, i.e., block length, rate, error probability, and channel quality. Furthermore, in light of the recent success of a list decoding algorithm for polar codes, we provide scaling results on the performance of list decoders. Next, we deal with non-standard channels. When we say that a coding scheme achieves capacity, we typically consider binary memoryless symmetric channels. However, practical transmission scenarios often involve more complicated settings. For example, the downlink of a cellular system is modeled as a broadcast channel, and the communication on fiber links is inherently asymmetric. We propose provably optimal low-complexity solutions for these settings. In particular, we present a polar coding scheme that achieves the best known rate region for the broadcast channel, and we describe three paradigms to achieve the capacity of asymmetric channels. To do so, we develop general coding "primitives", such as the chaining construction that has already proved to be useful in a variety of communication problems. Finally, we show how to achieve capacity via symmetry. In the early days of coding theory, a popular paradigm consisted in exploiting the structure of algebraic codes to devise practical decoding algorithms. However, proving the optimality of such coding schemes remained an elusive goal. In particular, the conjecture that Reed-Muller codes achieve capacity dates back to the 1960s. We solve this open problem by showing that Reed-Muller codes and, in general, codes with sufficient symmetry are capacity-achieving over erasure channels under optimal MAP decoding. As the proof does not rely on the precise structure of the codes, we are able to show that symmetry alone guarantees optimal performance

Lecture Notes on Network Information Theory

These lecture notes have been converted to a book titled Network Information Theory published recently by Cambridge University Press. This book provides a significantly expanded exposition of the material in the lecture notes as well as problems and bibliographic notes at the end of each chapter. The authors are currently preparing a set of slides based on the book that will be posted in the second half of 2012. More information about the book can be found at http://www.cambridge.org/9781107008731/. The previous (and obsolete) version of the lecture notes can be found at http://arxiv.org/abs/1001.3404v4/

Performance modelling with adaptive hidden Markov models and discriminatory processor sharing queues

In modern computer systems, workload varies at different times and locations. It is important to model the performance of such systems via workload models that are both representative and efficient. For example, model-generated workloads represent realistic system behaviour, especially during peak times, when it is crucial to predict and address performance bottlenecks. In this thesis, we model performance, namely throughput and delay, using adaptive models and discrete queues. Hidden Markov models (HMMs) parsimoniously capture the correlation and burstiness of workloads with spatiotemporal characteristics. By adapting the batch training of standard HMMs to incremental learning, online HMMs act as benchmarks on workloads obtained from live systems (i.e. storage systems and financial markets) and reduce time complexity of the Baum-Welch algorithm. Similarly, by extending HMM capabilities to train on multiple traces simultaneously it follows that workloads of different types are modelled in parallel by a multi-input HMM. Typically, the HMM-generated traces verify the throughput and burstiness of the real data. Applications of adaptive HMMs include predicting user behaviour in social networks and performance-energy measurements in smartphone applications. Equally important is measuring system delay through response times. For example, workloads such as Internet traffic arriving at routers are affected by queueing delays. To meet quality of service needs, queueing delays must be minimised and, hence, it is important to model and predict such queueing delays in an efficient and cost-effective manner. Therefore, we propose a class of discrete, processor-sharing queues for approximating queueing delay as response time distributions, which represent service level agreements at specific spatiotemporal levels. We adapt discrete queues to model job arrivals with distributions given by a Markov-modulated Poisson process (MMPP) and served under discriminatory processor-sharing scheduling. Further, we propose a dynamic strategy of service allocation to minimise delays in UDP traffic flows whilst maximising a utility function.Open Acces

On generalized LDPC codes for ultra reliable communication

Ultra reliable low latency communication (URLLC) is an important feature in future mobile communication systems, as they will require high data rates, large system capacity and massive device connectivity [11]. To meet such stringent requirements, many error-correction codes (ECC)s are being investigated; turbo codes, low density parity check (LDPC) codes, polar codes and convolutional codes [70, 92, 38], among many others. In this work, we present generalized low density parity check (GLDPC) codes as a promising candidate for URLLC. Our proposal is based on a novel class of GLDPC code ensembles, for which new analysis tools are proposed. We analyze the trade-o_ between coding rate and asymptotic performance of a class of GLDPC codes constructed by including a certain fraction of generalized constraint (GC) nodes in the graph. To incorporate both bounded distance (BD) and maximum likelihood (ML) decoding at GC nodes into our analysis without resorting to multi-edge type of degree distribution (DD)s, we propose the probabilistic peeling decoding (P-PD) algorithm, which models the decoding step at every GC node as an instance of a Bernoulli random variable with a successful decoding probability that depends on both the GC block code as well as its decoding algorithm. The P-PD asymptotic performance over the BEC can be efficiently predicted using standard techniques for LDPC codes such as Density evolution (DE) or the differential equation method. We demonstrate that the simulated P-PD performance accurately predicts the actual performance of the GLPDC code under ML decoding at GC nodes. We illustrate our analysis for GLDPC code ensembles with regular and irregular DDs. This design methodology is applied to construct practical codes for URLLC. To this end, we incorporate to our analysis the use of quasi-cyclic (QC) structures, to mitigate the code error floor and facilitate the code very large scale integration (VLSI) implementation. Furthermore, for the additive white Gaussian noise (AWGN) channel, we analyze the complexity and performance of the message passing decoder with various update rules (including standard full-precision sum product and min-sum algorithms) and quantization schemes. The block error rate (BLER) performance of the proposed GLDPC codes, combined with a complementary outer code, is shown to outperform a variety of state-of-the-art codes, for URLLC, including LDPC codes, polar codes, turbo codes and convolutional codes, at similar complexity rates.Programa Oficial de Doctorado en Multimedia y ComunicacionesPresidente: Juan José Murillo Fuentes.- Secretario: Matilde Pilar Sánchez Fernández.- Vocal: Javier Valls Coquilla

Advanced receivers for distributed cooperation in mobile ad hoc networks

Mobile ad hoc networks (MANETs) are rapidly deployable wireless communications systems, operating with minimal coordination in order to avoid spectral efficiency losses caused by overhead. Cooperative transmission schemes are attractive for MANETs, but the distributed nature of such protocols comes with an increased level of interference, whose impact is further amplified by the need to push the limits of energy and spectral efficiency. Hence, the impact of interference has to be mitigated through with the use PHY layer signal processing algorithms with reasonable computational complexity. Recent advances in iterative digital receiver design techniques exploit approximate Bayesian inference and derivative message passing techniques to improve the capabilities of well-established turbo detectors. In particular, expectation propagation (EP) is a flexible technique which offers attractive complexity-performance trade-offs in situations where conventional belief propagation is limited by computational complexity. Moreover, thanks to emerging techniques in deep learning, such iterative structures are cast into deep detection networks, where learning the algorithmic hyper-parameters further improves receiver performance. In this thesis, EP-based finite-impulse response decision feedback equalizers are designed, and they achieve significant improvements, especially in high spectral efficiency applications, over more conventional turbo-equalization techniques, while having the advantage of being asymptotically predictable. A framework for designing frequency-domain EP-based receivers is proposed, in order to obtain detection architectures with low computational complexity. This framework is theoretically and numerically analysed with a focus on channel equalization, and then it is also extended to handle detection for time-varying channels and multiple-antenna systems. The design of multiple-user detectors and the impact of channel estimation are also explored to understand the capabilities and limits of this framework. Finally, a finite-length performance prediction method is presented for carrying out link abstraction for the EP-based frequency domain equalizer. The impact of accurate physical layer modelling is evaluated in the context of cooperative broadcasting in tactical MANETs, thanks to a flexible MAC-level simulato