Bayesian graphical models for indoor localization in MTC deployment scenarios

Abstract. Herein, we propose and assess an iterative Bayesian-based indoor localization system to estimate the position of a target device. We describe the Bayesian network and then build graphical models for various measurement metrics, namely Received Signal Strength (RSS), Time Difference of Arrival (TDOA), and Angle of Arrival (AOA) which are collected by the distributed receivers in the network area. The estimations are carried out by Markov chain Monte Carlo (MCMC) methods which approximates the target’s position using the Bayesian network model and measurements collected by the receivers. We employ an iterative method by using previous estimations of the target’s position as prior knowledge to improve the accuracy of the subsequent estimations, where the prior knowledge is used as the prior distributions of our Bayesian model. In our results, we observe that the proposed iterative localization system improves the performance of the Bayesian TDOA-based localization system by increasing the respective estimate accuracy. Furthermore, we show that the number of measurements collected by the receivers and the selected prior distribution also affect the performance of the proposed iterative mechanism. In fact, the number of measurements increases the accuracy of the mechanism, while its benefit diminishes with more iterations as the mechanism progresses. Regarding the prior distribution, we show that it can lead to good or bad estimations of the target’s position, and therefore, needs to be carefully chosen considering the measurement metric and the mobility of the target node

ReSCon '11, Research Student Conference: Book of Abstracts

The fourth SED Research Student Conference (ReSCon2011) was hosted over three days, 20-22 June 2011, in the Hamilton Centre at Brunel University. The conference consisted of technical presentations, a poster session and social events. which focused on current research being conducted within the School of Engineering and Design by postgraduate research students from the School. The conference is held annually, and ReSCon plays a key role in contributing to research and innovations within the School

Autonomous Swarm Navigation

Robotic swarm systems attract increasing attention in a wide variety of applications, where a multitude of self-organized robotic entities collectively accomplish sensing or exploration tasks. Compared to a single robot, a swarm system offers advantages in terms of exploration speed, robustness against single point of failures, and collective observations of spatio-temporal processes. Autonomous swarm navigation, including swarm self-localization, the localization of external sources, and swarm control, is essential for the success of an autonomous swarm application. However, as a newly emerging technology, a thorough study of autonomous swarm navigation is still missing. In this thesis, we systematically study swarm navigation systems, particularly emphasizing on their collective performance. The general theory of swarm navigation as well as an in-depth study on a specific swarm navigation system proposed for future Mars exploration missions are covered. Concerning swarm localization, a decentralized algorithm is proposed, which achieves a near-optimal performance with low complexity for a dense swarm network. Regarding swarm control, a position-aware swarm control concept is proposed. The swarm is aware of not only the position estimates and the estimation uncertainties of itself and the sources, but also the potential motions to enrich position information. As a result, the swarm actively adapts its formation to improve localization performance, without losing track of other objectives, such as goal approaching and collision avoidance. The autonomous swarm navigation concept described in this thesis is verified for a specific Mars swarm exploration system. More importantly, this concept is generally adaptable to an extensive range of swarm applications

Cooperative Position and Orientation Estimation with Multi-Mode Antennas

Robotic multi-agent systems are envisioned for planetary exploration and terrestrial applications. Autonomous operation of robots requires estimations of their positions and orientations, which are obtained from the direction-of-arrival (DoA) and the time-of-arrival (ToA) of radio signals exchanged among the agents. In this thesis, we estimate the signal DoA and ToA using a multi-mode antenna (MMA). An MMA is a single antenna element, where multiple orthogonal current modes are excited by different antenna ports. We provide a first study on the use of MMAs for cooperative position and orientation estimation, specifically exploring their DoA estimation capabilities. Assuming the agents of a cooperative network are equipped with MMAs, lower bounds on the achievable position and orientation accuracy are derived. We realize a gap between the theoretical lower bounds and real-world performance of a cooperative radio localization system, which is caused by imperfect antenna and transceiver calibration. Consequentially, we theoretically analyze in-situ antenna calibration, introduce an algorithm for the calibration of arbitrary multiport antennas and show its effectiveness by simulation. To also improve calibration during operation, we propose cooperative simultaneous localization and calibration (SLAC). We show that cooperative SLAC is able to estimate antenna responses and ranging biases of the agents together with their positions and orientations, leading to considerably better position and orientation accuracy. Finally, we validate the results from theory and simulation by experiments with robotic rovers equipped with software-defined radios (SDRs). In conclusion, we show that DoA estimation with an MMA is feasible, and accuracy can be improved by in-situ calibration and SLAC

Localisation en intérieur et gestion de la mobilité dans les réseaux sans fils hétérogènes émergents

Au cours des dernières décennies, nous avons été témoins d'une évolution considérable dans l'informatique mobile, réseau sans fil et des appareils portatifs. Dans les réseaux de communication à venir, les utilisateurs devraient être encore plus mobiles exigeant une connectivité omniprésente à différentes applications qui seront de préférence au courant de leur contexte. Certes, les informations de localisation dans le cadre de leur contexte est d'une importance primordiale à la fois la demande et les perspectives du réseau. Depuis l'application ou de point de vue utilisateur, la fourniture de services peut mettre à jour si l'adaptation au contexte de l'utilisateur est activée. Du point de vue du réseau, des fonctionnalités telles que le routage, la gestion de transfert, l'allocation des ressources et d'autres peuvent également bénéficier si l'emplacement de l'utilisateur peuvent être suivis ou même prédit. Dans ce contexte, nous nous concentrons notre attention sur la localisation à l'intérieur et de la prévision transfert qui sont des composants indispensables à la réussite ultime de l'ère de la communication omniprésente envisagé. Alors que les systèmes de positionnement en plein air ont déjà prouvé leur potentiel dans un large éventail d'applications commerciales, le chemin vers un système de localisation à l'intérieur de succès est reconnu pour être beaucoup plus difficile, principalement en raison des caractéristiques difficiles à l'intérieur et l'exigence d'une plus grande précision. De même, la gestion de transfert dans le futur des réseaux hétérogènes sans fil est beaucoup plus difficile que dans les réseaux traditionnels homogènes. Régimes de procédure de transfert doit être sans faille pour la réunion strictes de qualité de service (QoS) des applications futures et fonctionnel malgré la diversité des caractéristiques de fonctionnement des différentes technologies. En outre, les décisions transfert devraient être suffisamment souples pour tenir compte des préférences utilisateur d'un large éventail de critères proposés par toutes les technologies. L'objectif principal de cette thèse est de mettre au point précis, l'heure et l'emplacement de puissance et de systèmes efficaces de gestion de transfert afin de mieux satisfaire applications sensibles au contexte et mobiles. Pour obtenir une localisation à l'intérieur, le potentiel de réseau local sans fil (WLAN) et Radio Frequency Identification (RFID) que l'emplacement autonome technologies de détection sont d'abord étudiés par des essais plusieurs algorithmes et paramètres dans un banc d'essai expérimental réel ou par de nombreuses simulations, alors que leurs lacunes sont également été identifiés. Leur intégration dans une architecture commune est alors proposée afin de combiner leurs principaux avantages et surmonter leurs limitations. La supériorité des performances du système de synergie sur le stand alone homologues est validée par une analyse approfondie. En ce qui concerne la tâche de gestion transfert, nous repérer que la sensibilité au contexte peut aussi améliorer la fonctionnalité du réseau. En conséquence, deux de tels systèmes qui utilisent l'information obtenue à partir des systèmes de localisation sont proposées. Le premier schéma repose sur un déploiement tag RFID, comme notre architecture de positionnement RFID, et en suivant la scène WLAN analyse du concept de positionnement, prédit l'emplacement réseau de la prochaine couche, c'est à dire le prochain point de fixation sur le réseau. Le second régime repose sur une approche intégrée RFID et sans fil de capteur / actionneur Network (WSAN) de déploiement pour la localisation des utilisateurs physiques et par la suite pour prédire la prochaine leur point de transfert à deux couches de liaison et le réseau. Etre indépendant de la technologie d'accès sans fil principe sous-jacent, les deux régimes peuvent être facilement mises en œuvre dans des réseaux hétérogènes [...]Over the last few decades, we have been witnessing a tremendous evolution in mobile computing, wireless networking and hand-held devices. In the future communication networks, users are anticipated to become even more mobile demanding for ubiquitous connectivity to different applications which will be preferably aware of their context. Admittedly, location information as part of their context is of paramount importance from both application and network perspectives. From application or user point of view, service provision can upgrade if adaptation to the user's context is enabled. From network point of view, functionalities such as routing, handoff management, resource allocation and others can also benefit if user's location can be tracked or even predicted. Within this context, we focus our attention on indoor localization and handoff prediction which are indispensable components towards the ultimate success of the envisioned pervasive communication era. While outdoor positioning systems have already proven their potential in a wide range of commercial applications, the path towards a successful indoor location system is recognized to be much more difficult, mainly due to the harsh indoor characteristics and requirement for higher accuracy. Similarly, handoff management in the future heterogeneous wireless networks is much more challenging than in traditional homogeneous networks. Handoff schemes must be seamless for meeting strict Quality of Service (QoS) requirements of the future applications and functional despite the diversity of operation features of the different technologies. In addition, handoff decisions should be flexible enough to accommodate user preferences from a wide range of criteria offered by all technologies. The main objective of this thesis is to devise accurate, time and power efficient location and handoff management systems in order to satisfy better context-aware and mobile applications. For indoor localization, the potential of Wireless Local Area Network (WLAN) and Radio Frequency Identification (RFID) technologies as standalone location sensing technologies are first studied by testing several algorithms and metrics in a real experimental testbed or by extensive simulations, while their shortcomings are also identified. Their integration in a common architecture is then proposed in order to combine their key benefits and overcome their limitations. The performance superiority of the synergetic system over the stand alone counterparts is validated via extensive analysis. Regarding the handoff management task, we pinpoint that context awareness can also enhance the network functionality. Consequently, two such schemes which utilize information obtained from localization systems are proposed. The first scheme relies on a RFID tag deployment, alike our RFID positioning architecture, and by following the WLAN scene analysis positioning concept, predicts the next network layer location, i.e. the next point of attachment to the network. The second scheme relies on an integrated RFID and Wireless Sensor/Actuator Network (WSAN) deployment for tracking the users' physical location and subsequently for predicting next their handoff point at both link and network layers. Being independent of the underlying principle wireless access technology, both schemes can be easily implemented in heterogeneous networks. Performance evaluation results demonstrate the advantages of the proposed schemes over the standard protocols regarding prediction accuracy, time latency and energy savingsEVRY-INT (912282302) / SudocSudocFranceF