A Versatile workbench simulator: Five-phase inverter and PMa-SynRM performance evaluation

© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Thispaperpresents the design and structure of aversatileworkbench simulator forevaluating the performance of a five-phase inverter andPermanent Magnet assisted Synchronous Reluctance Motor(PMa-SynRM). The simulatorallows for adding variations tothe modulationtechniques, changingthe inverter structure’s semiconductordevice, and calculatingtheinverter’spower losses. Itcanalso facilitate observingthe current, voltage,andthe jointtemperature ofthe semiconductors devices. Furthermore,wecanobtain a perform that is close to anactualPMa-SynRM, dependingon the desired conditionsof speed and torque. The workbench simulator wasdevelopedby combining three software: Matlab/Simulink, PLECSand Altair Flux.Postprint (author's final draft

Energy-efficient and Power-dense DC-DC Converters in Data Center and Electric Vehicle Applications Using Wide Bandgap Devices

The ever increasing demands in the energy conversion market propel power converters towards high efficiency and high power density. With fast development of data processing capability in the data center, the server will include more processors, memories, chipsets and hard drives than ever, which requires more efficient and compact power converters. Meanwhile, the energy-efficient and power-dense converters for the electric vehicle also result in longer driving range as well as more passengers and cargo capacities. DC-DC converters are indispensable power stages for both applications. In order to address the efficiency and density requirements of the DC-DC converters in these applications, several related research topics are discussed in this dissertation. For the DC-DC converter in the data center application, a LLC resonant converter based on the newly emerged GaN devices is developed to improve the efficiency over the traditional Si-based converter. The relationship between the critical device parameters and converter loss is established. A new perspective of extra winding loss due to the asymmetrical primary and secondary side current in LLC resonant converter is proposed. The extra winding loss is related to the critical device parameters as well. The GaN device benefits on device loss and transformer winding loss is analyzed. An improved LLC resonant converter design method considering the device loss and transformer winding loss is proposed. For the DC-DC converter in the electric vehicle application, an integrated DC-DC converter that combines the on-board charger DC-DC converter and drivetrain DC-DC converter is developed. The integrated DC-DC converter is considered to operate in different modes. The existing dual active bridge (DAB) DC-DC converter originally designed for the charger is proposed to operate in the drivetrain mode to improve the efficiency at the light load and high voltage step-up ratio conditions of the traditional drivetrain DC-DC converter. Design method and loss model are proposed for the integrated converter in the drivetrain mode. A scaled-down integrated DC-DC converter prototype is developed to verify the design and loss model

High Performance Cooling of Traction Brushless Machines

The work presented in this thesis covers several aspects of traction electric drive system design. Particular attention is given to the traction electrical machine with focus on the cooling solution, thermal modelling and testing. A 60 kW peak power traction machine is designed to achieve high power density and high efficiency thanks to direct oil cooling. The machine selected has a tooth coil winding, also defined as non-overlapping fractional slot concentrated winding. This winding concept is state of the art for many applications with high volumes and powers below 10 kW. Also, these have been proven successful in high power applications such as wind power generators. In this thesis, it is shown that this technology is promising also for traction machines and, with some suggested design solutions, can present certain unique advantages when it comes to manufacturing and cooling.The traction machine in this work is designed for a small two-seater electric vehicle but could as well be used in a parallel hybrid. The proposed solution has the advantage of having a simple winding design and of integrating the cooling within the stator slot and core. A prototype of the machine has been built and tested, showing that the machine can operate with current densities of up to 35 A/mm^2 for 30 seconds and 25 A/mm^2 continuously. This results in a net power density of the built prototype of 24 kW/l and a gross power density of 8 kW/l with a peak efficiency above 94%. It is shown that a version of the same design optimized for mass manufacturing has the potential of having a gross power density of 15.5 kW/l which would be comparable with the best in class traction machines found on the automotive industry. The cooling solution proposed is resulting in significantly lower winding temperature and an efficiency gain between 1.5% and 3.5% points, depending on the drivecycle, compared to an external jacket cooling, which is a common solution for traction motors

Investigation of FACTS devices to improve power quality in distribution networks

Flexible AC transmission system (FACTS) technologies are power electronic solutions that improve power transmission through enhanced power transfer volume and stability, and resolve quality and reliability issues in distribution networks carrying sensitive equipment and non-linear loads. The use of FACTS in distribution systems is still in its infancy. Voltages and power ratings in distribution networks are at a level where realistic FACTS devices can be deployed. Efficient power converters and therefore loss minimisation are crucial prerequisites for deployment of FACTS devices. This thesis investigates high power semiconductor device losses in detail. Analytical closed form equations are developed for conduction loss in power devices as a function of device ratings and operating conditions. These formulae have been shown to predict losses very accurately, in line with manufacturer data. The developed formulae enable circuit designers to quickly estimate circuit losses and determine the sensitivity of those losses to device voltage and current ratings, and thus select the optimal semiconductor device for a specific application. It is shown that in the case of majority carrier devices (such as power MOSFETs), the conduction power loss (at rated current) increases linearly in relation to the varying rated current (at constant blocking voltage), but is a square root of the variable blocking voltage when rated current is fixed. For minority carrier devices (such as a pin diode or IGBT), a similar relationship is observed for varying current, however where the blocking voltage is altered, power losses are derived as a square root with an offset (from the origin). Finally, this thesis conducts a power loss-oriented evaluation of cascade type multilevel converters suited to reactive power compensation in 11kV and 33kV systems. The cascade cell converter is constructed from a series arrangement of cell modules. Two prospective structures of cascade type converters were compared as a case study: the traditional type which uses equal-sized cells in its chain, and a second with a ternary relationship between its dc-link voltages. Modelling (at 81 and 27 levels) was carried out under steady state conditions, with simplified models based on the switching function and using standard circuit simulators. A detailed survey of non punch through (NPT) and punch through (PT) IGBTs was completed for the purpose of designing the two cascaded converters. Results show that conduction losses are dominant in both types of converters in NPT and PT IGBTs for 11kV and 33kV systems. The equal-sized converter is only likely to be useful in one case (27-levels in the 33kV system). The ternary-sequence converter produces lower losses in all other cases, and this is especially noticeable for the 81-level converter operating in an 11kV network

Design and Validation of A High-Power, High Density All Silicon Carbide Three-Level Inverter

Transportation electrification is clearly the road toward the future. Compared to internal combustion engine, the electrified vehicle has less carbon-dioxide emission, less maintenance costs and less operation costs. It also offers higher efficiency and safety margin. More importantly, it relieves human’s dependence on conventional fossil energy. In the electrification progress, the revolution of electric traction drive systems is one of the most important milestone. The traction system should keep high efficiency to avoid performance reduction. Moreover, the motor drive should be designed within limited space without sacrificing output power rating. Based on the road map from US Drive Electrical and Electronics Technical Team, US Department of Energy, a gap is still there between roadmap target and the state-of-art. To fill the gap, this dissertation performs a systematic research in motor drive system for traction inverters. This paper starts from optimal theoretical design of power converters by using loss model and real-time simulation system. Based on optimal paper design, hardware design is implemented. The component design for converter, such as the laminated busbar, are the focus in this dissertation. The optimized busbar structure can effectively reduce stray inductance in the current-commutation loop, reducing switching overshoots of power modules and increasing semiconductor reliability. The system-level design and trade-off is also analyzed and illustrated by using a 250kW three-level T-type neutral-point clamped converter. The design has reached high efficiency and high-power density. The converter system is also evaluated through comprehensive tests, such as double-pulse tests and continuous tests. The test setup, test condition and test result analysis are discussed in the dissertation. In the end, the dissertation also proposed an improved impedance characterization method for components parasitic inductance measurement in traction drive systems, such as laminated busbar, power module and capacitors. The characterization shares better accuracy and can be customized for device under test with any geometry

Optimisation of High Reliability Integrated Motor Drives

The development of integrated motor drives (IMDs) with high volumetric power density and reliability are crucial for the continued development and adoption of electric vehicles (EV). The development of the wide bandgap (WBG) devices, especially Silicon Carbide (SiC) MOSFETs, enables new possibilities for traction drive systems. However, to maximise the benefits of SiC, the IMD design process, including passive component selection, control and thermal management should be optimised. This thesis goes through the initial major design steps in SiC power system design, from SiC device analysis and modelling to circuit design and electrothermal simulation of an IMD system. A novel approach to discrete SiC MOSFET selection, using a method of calculating performance based on experimental data, is described. Dynamic behaviour of a family of 1200 V MOSFETs is studied at temperatures up to 175 °C using a double pulse test to show the combined effect of the differences in internal design between MOSFETs with different current ratings. It is observed that the 30 mΩ MOSFET had a 24 % higher switching loss than a 140 mΩ at a 30 A load current. The study then goes on to compare the effect of switching frequency, paralleling of MOSFETs and the device type used to demonstrate the inverter design with the lowest power losses, which will equate to low temperatures and high lifetime. The novel methodology can find the optimal choice of MOSFET from the family, and number required through paralleling, for a circuit when given the load current, temperature and switching. Understanding the device interdependencies in a single family is utilised to also predict the relative performance between SiC MOSFETs from different manufacturers. An axial-flux permanent magnet synchronous motor (PMSM) driven by a three-phase SiC inverter is simulated in PLECS using experimentally validated MOSFET models chosen by the device selection methodology. Electrothermal analysis shows the influence of switching frequency, temperature, MOSFETs paralleling and DC-link capacitance on voltage ripple, total harmonic distortion, efficiency and MOSFET loss and temperature profiles. With a 60 % decrease in THD and 50 % increase in maximum MOSFET junction temperature when switching frequency is increased from 10 to 100 kHz. The high-temperature stress on the semiconductors due to close proximity with the ma- chine stator means reliability is an important consideration that is yet to be fully investigated in IMD optimisations. This study uses a lifetime model specific to the transistor package TO-247 in reliability optimisation for IMD for the first time. It requires detailed MOSFET simulation outputs to provide a highly accurate lifetime for discrete SiC MOSFETs. Both single and multi-objective optimisations of the volume and lifetime of the three- phase inverter are presented. The single objective optimisation demonstrates the minimum volume and the corresponding switching frequency and lifetime when between three and six MOSFETs are paralleled at a temperature range between 50 and 150 °C. Design constraints were set limiting the feasible switching frequency range to between 13 kHz because of THD and 118 kHz because of efficiency limits, corresponding to required DC-link capacitors of 520 and 55 μF respectively. Increases in temperature were found to further limit the maximum switching frequency and therefore increase the minimum volume of the inverter. A Pareto front identifies a range of possible solutions for the volume and lifetime of an inverter with six paralleled MOSFETs through the multi-objective objective procedure. Further analysis of these possible solutions identified a single optimal solution for the system, using a DC-link capacitance of 190 μF at 45 kHz, giving a combined volume of the capacitor and MOSFETs of 440 cm3 and a lifetime of 12,000 hours. Finally, the electrothermal analysis of a dual inverter driving a symmetric six-phase PMSM is presented with the benefits of modular multi-phase systems in IMDs summarised. Effect on performance of lower per-phase current, interleaving strategies and fault tolerance are analysed and compared to equivalent three-phase systems, for 60 kW and 120 kW operation. A novel method for lifetime prediction of systems with paralleled MOSFETs or fault tolerance capabilities considering incremental damage is developed based on TO-247 lifetime calculations from PLECS simulation, and component-level reliability profiles using Monte Carlo analysis. The dual inverter is used to model the system and implements control schemes for both single-phase and single inverter failure while maintaining the 4000 rpm and 140 Nm speed and torque requirements. A twofold increase in B10 lifetime of is observed when the effect of paralleled SiC MOSFETs prevents immediate system failure in a three-phase inverter. A computational fluid dynamics (CFD) and 3D finite element thermal model are designed to study the inverter behaviour based on the thermal analysis of its shared cooling plate with a 300 mm diameter axial flux PMSM. Concentric layout designs minimise the variation of junction temperatures to 5 °C and the effect of the flow rate and temperature of the coolant in the PMSM cold plate is presented between 5 and 30 l/min. The multi-objective optimisation procedure used to compare the dual inverter demonstrated it outperformed the three-phase inverter with 15 % smaller required DC-link capacitance, higher efficiency and increased lifetime in part due to its fault-tolerant nature. The optimal dual inverter considering the design constraints consists of four 40 μF KEMET film capacitors operating with a switching frequency of 46 kHz giving an inverter volume of 300 cm3 and a lifetime of 16.3 years, assuming 1000 hours of operation annually

Modular Battery Systems for Electric Vehicles based on Multilevel Inverter Topologies - Opportunities and Challenges

Modular battery systems based on multilevel inverter (MLI) topologies can possibly overcome some shortcomings of two-level inverters when used for vehicle propulsion. The results presented in this thesis aim to point out the advantages and disadvantages, as well as the technical challenges, of modular vehicle battery systems based on MLIs in comparison to a conventional, two-level IGBT inverter drivetrain. The considered key aspects for this comparative investigation are the drive cycle efficiency, the inverter cost, the fault tolerance capability of the drivetrain and the conducted electromagnetic emissions. Extensive experiments have been performed to support the results and conclusions.In this work, it is shown that the simulated drive cycle efficiency of different low-voltage-MOSFET-based, cascaded seven-level inverter types is improved in comparison to a similarly rated, two-level IGBT inverter drivetrain. For example, the simulated WLTP drive cycle efficiency of a cascaded double-H-bridge (CDHB) inverter drivetrain in comparison to a two-level IGBT inverter, when used in a small passenger car, is increased from 94.24% to 95.04%, considering the inverter and the ohmic battery losses. In contrast, the obtained efficiency of a similar rated seven-level cascaded H-bridge (CHB) drivetrain is almost equal to that of the two-level inverter drivetrain, but with the help of a hybrid modulation technique, utilizing fundamental selective harmonic elimination at lower speeds, it could be improved to 94.85%. In addition, the CDHB and CHB inverters’ cost, in comparison to the two-level inverter, is reduced from 342€ to 202€ and 121€, respectively. Furthermore, based on a simple three-level inverter with a dual battery pack, it is shown that MLIs inherently allow for a fault tolerant operation. It is explained how the drivetrain of a neutral point clamped (NPC) inverter can be operated under a fault condition, so that the vehicle can drive with a limited maximum power to the next service station, referred to as limp home mode. Especially, the detection and localization of open circuit faults has been investigated and verified through simulations and experiments.Moreover, it is explained how to measure the conducted emissions of an NPC inverter with a dual battery pack according to the governing standard, CISPR 25, because the additional neutral point connection forms a peculiar three-wire DC source. To separate the measured noise spectra into CM, line-DM and phase-DMquantities, two hardware separators based on HF transformers are developed and utilized. It is shown that the CM noise is dominant. Furthermore, the CM noise is reduced by 3dB to 6dB when operating the inverter with three-level instead of two-level modulation

A comprehensive analysis of SVPWM for a Five-phase VSI based on SiC devices applied to motor drives

© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This paper presents a comprehensive analysis of SVPWM for a five-phase VSI based on SiC devices applied to motor drives. The modulation techniques analyzed use medium and large vectors to reach the reference vector. The 2L SVPWM uses two large space vectors, and the generated output signal contain low frequency harmonics. 2L+2M SVPWM uses two large and two medium space vectors. This technique provides good power loss distribution. 4L SVPWM works with the activation of four large space vectors. This modulation is able to generate low common-mode voltage. The performance and main features are analyzed using Matlab/Simulink and PLECS blockset software. Power losses, total harmonic distortion and common-mode voltage are compared and evaluated.Postprint (author's final draft

Wide Band Gap Devices and Their Application in Power Electronics

Power electronic systems have a great impact on modern society. Their applications target a more sustainable future by minimizing the negative impacts of industrialization on the environment, such as global warming effects and greenhouse gas emission. Power devices based on wide band gap (WBG) material have the potential to deliver a paradigm shift in regard to energy efficiency and working with respect to the devices based on mature silicon (Si). Gallium nitride (GaN) and silicon carbide (SiC) have been treated as one of the most promising WBG materials that allow the performance limits of matured Si switching devices to be significantly exceeded. WBG-based power devices enable fast switching with lower power losses at higher switching frequency and hence, allow the development of high power density and high efficiency power converters. This paper reviews popular SiC and GaN power devices, discusses the associated merits and challenges, and finally their applications in power electronics