Noise shaping Asynchronous SAR ADC based time to digital converter

Time-to-digital converters (TDCs) are key elements for the digitization of timing information in modern mixed-signal circuits such as digital PLLs, DLLs, ADCs, and on-chip jitter-monitoring circuits. Especially, high-resolution TDCs are increasingly employed in on-chip timing tests, such as jitter and clock skew measurements, as advanced fabrication technologies allow fine on-chip time resolutions. Its main purpose is to quantize the time interval of a pulse signal or the time interval between the rising edges of two clock signals. Similarly to ADCs, the performance of TDCs are also primarily characterized by Resolution, Sampling Rate, FOM, SNDR, Dynamic Range and DNL/INL. This work proposes and demonstrates 2nd order noise shaping Asynchronous SAR ADC based TDC architecture with highest resolution of 0.25 ps among current state of art designs with respect to post-layout simulation results. This circuit is a combination of low power/High Resolution 2nd Order Noise Shaped Asynchronous SAR ADC backend with simple Time to Amplitude converter (TAC) front-end and is implemented in 40nm CMOS technology. Additionally, special emphasis is given on the discussion on various current state of art TDC architectures.Electrical and Computer Engineerin

A highly digital, reconfigurable and voltage scalable SAR ADC

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.Cataloged from PDF version of thesis.Includes bibliographical references (p. 109-112).Micropower sensor networks have a broad range of applications which include military surveillance, environmental monitoring, chemical detection and more recently, medical monitoring systems. Each node of the sensor network requires energy efficient circuits powered off small batteries or harvested energy. In such systems, a single reconfigurable analog-to-digital converter (ADC) is needed to digitize a wide range of signals with varying bandwidth and resolution requirements. This thesis describes the design of an ADC whose power scales exponentially with resolution and linearly with frequency to maximize the system lifetime. The proposed ADC has reconfigurable resolution from 5 to 10-bits and a scalable sample rate from 0 to 1-MS/s. The successive approximation register (SAR) architecture was chosen for its highly digital nature which enables low voltage operation. The supply voltage can be scaled from 1V down to 0.4V such that the ADC maintains a constant energy efficiency across all modes of operation when normalized with respect to sample rate and resolution. A capacitive digital-to -analog converter (DAC) in a split capacitor topology with a sub-DAC is used to minimize the DAC power and area. Top plate switches are used to decouple the MSB capacitors as resolution is scaled to avoid parasitic loading of the DAC. The DAC capacitors are laid out in a common-centroid configuration with edge effects minimized at each resolution mode to improve matching. A fully dynamic latched comparator is used to avoid static bias currents.(cont.) Power gating of the digital logic is used to reduce leakage power at low sample rates. Reconfigurability between single-ended or differential modes enables a power versus performance trade-off. Lastly, programmable sampling duration and internal bootstrapping is used to maintain sampling linearity at low voltages. The ADC has been submitted for fabrication in a low power 65nm digital CMOS process and simulation results are presented.by Marcus Yip.S.M

Pixels for focal-plane scale space generation and for high dynamic range imaging

Focal-plane processing allows for parallel processing throughout the entire pixel matrix, which can help increasing the speed of vision systems. The fabrication of circuits inside the pixel matrix increases the pixel pitch and reduces the fill factor, which leads to reduced image quality. To take advantage of the focal-plane processing capabilities and minimize image quality reduction, we first consider the inclusion of only two extra transistors in the pixel, allowing for scale space generation at the focal plane. We assess the conditions in which the proposed circuitry is advantageous. We perform a time and energy analysis of this approach in comparison to a digital solution. Considering that a SAR ADC per column is used and the clock frequency is equal to 5.6 MHz, the proposed analysis show that the focal-plane approach is 26 times faster if the digital solution uses 10 processing elements, and 49 times more energy-efficient. Another way of taking advantage of the focal-plane signal processing capability is by using focal-plane processing for increasing image quality itself, such as in the case of high dynamic range imaging pixels. This work also presents the design and study of a pixel that captures high dynamic range images by sensing the matrix average luminance, and then adjusting the integration time of each pixel according to the global average and to the local value of the pixel. This pixel was implemented considering small structural variations, such as different photodiode sizes for global average luminance measurement. Schematic and post-layout simulations were performed with the implemented pixel using an input image of 76 dB, presenting results with details in both dark and bright image areas.O processamento no plano focal de imageadores permite que a imagem capturada seja processada em paralelo por toda a matrix de pixels, característica que pode aumentar a velocidade de sistemas de visão. Ao fabricar circuitos dentro da matrix de pixels, o tamanho do pixel aumenta e a razão entre área fotossensível e a área total do pixel diminui, reduzindo a qualidade da imagem. Para utilizar as vantagens do processamento no plano focal e minimizar a redução da qualidade da imagem, a primeira parte da tese propõe a inclusão de dois transistores no pixel, o que permite que o espaço de escalas da imagem capturada seja gerado. Nós então avaliamos em quais condições o circuito proposto é vantajoso. Nós analisamos o tempo de processamento e o consumo de energia dessa proposta em comparação com uma solução digital. Utilizando um conversor de aproximações sucessivas com frequência de 5.6 MHz, a análise proposta mostra que a abordagem no plano focal é 26 vezes mais rápida que o circuito digital com 10 elementos de processamento, e consome 49 vezes menos energia. Outra maneira de utilizar processamento no plano focal consiste em aplicá-lo para melhorar a qualidade da imagem, como na captura de imagens em alta faixa dinâmica. Esta tese também apresenta o estudo e projeto de um pixel que realiza a captura de imagens em alta faixa dinâmica através do ajuste do tempo de integração de cada pixel utilizando a iluminação média e o valor do próprio pixel. Esse pixel foi projetado considerando pequenas variações estruturais, como diferentes tamanhos do fotodiodo que realiza a captura do valor de iluminação médio. Simulações de esquemático e pós-layout foram realizadas com o pixel projetado utilizando uma imagem com faixa dinâmica de 76 dB, apresentando resultados com detalhes tanto na parte clara como na parte escura da imagem

Interface Circuits for Microsensor Integrated Systems

ca. 200 words; this text will present the book in all promotional forms (e.g. flyers). Please describe the book in straightforward and consumer-friendly terms. [Recent advances in sensing technologies, especially those for Microsensor Integrated Systems, have led to several new commercial applications. Among these, low voltage and low power circuit architectures have gained growing attention, being suitable for portable long battery life devices. The aim is to improve the performances of actual interface circuits and systems, both in terms of voltage mode and current mode, in order to overcome the potential problems due to technology scaling and different technology integrations. Related problems, especially those concerning parasitics, lead to a severe interface design attention, especially concerning the analog front-end and novel and smart architecture must be explored and tested, both at simulation and prototype level. Moreover, the growing demand for autonomous systems gets even harder the interface design due to the need of energy-aware cost-effective circuit interfaces integrating, where possible, energy harvesting solutions. The objective of this Special Issue is to explore the potential solutions to overcome actual limitations in sensor interface circuits and systems, especially those for low voltage and low power Microsensor Integrated Systems. The present Special Issue aims to present and highlight the advances and the latest novel and emergent results on this topic, showing best practices, implementations and applications. The Guest Editors invite to submit original research contributions dealing with sensor interfacing related to this specific topic. Additionally, application oriented and review papers are encouraged.

Convertisseur analogique-numérique neuromimétique de basse consommation d'énergie pour les biocapteurs

Introduction aux CAN -- CAN idéal -- CAN réel -- Travaux de pointe sur les convertisseurs analogiques-numériques -- Architectures neuromimétiques -- Architecture de la cellule nerveuse et cheminement de l'influx nerveux -- Propriétés électriques d'une cellule nerveuse -- Mécanisme de propagation de l'influx nerveux -- Modèle électrique de la membrane neuronale -- CAN neuromimétique ultra basse puissance -- Cellule neuronale -- Compteur binaire systolique asynchrone -- Performances de NC-ADC non calibré -- Circuit de calibration -- Performances du NC-ADC calibré -- Résultats des simulations et résultats expérimentaux -- Simulation post-layout -- Résultats expérimentaux -- Comparaison des performances

Circuits and Systems Advances in Near Threshold Computing

Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing

A Construction Kit for Efficient Low Power Neural Network Accelerator Designs

Implementing embedded neural network processing at the edge requires efficient hardware acceleration that couples high computational performance with low power consumption. Driven by the rapid evolution of network architectures and their algorithmic features, accelerator designs are constantly updated and improved. To evaluate and compare hardware design choices, designers can refer to a myriad of accelerator implementations in the literature. Surveys provide an overview of these works but are often limited to system-level and benchmark-specific performance metrics, making it difficult to quantitatively compare the individual effect of each utilized optimization technique. This complicates the evaluation of optimizations for new accelerator designs, slowing-down the research progress. This work provides a survey of neural network accelerator optimization approaches that have been used in recent works and reports their individual effects on edge processing performance. It presents the list of optimizations and their quantitative effects as a construction kit, allowing to assess the design choices for each building block separately. Reported optimizations range from up to 10'000x memory savings to 33x energy reductions, providing chip designers an overview of design choices for implementing efficient low power neural network accelerators

Biomedical Engineering

Biomedical engineering is currently relatively wide scientific area which has been constantly bringing innovations with an objective to support and improve all areas of medicine such as therapy, diagnostics and rehabilitation. It holds a strong position also in natural and biological sciences. In the terms of application, biomedical engineering is present at almost all technical universities where some of them are targeted for the research and development in this area. The presented book brings chosen outputs and results of research and development tasks, often supported by important world or European framework programs or grant agencies. The knowledge and findings from the area of biomaterials, bioelectronics, bioinformatics, biomedical devices and tools or computer support in the processes of diagnostics and therapy are defined in a way that they bring both basic information to a reader and also specific outputs with a possible further use in research and development

Low-Power Design of Digital VLSI Circuits around the Point of First Failure

As an increase of intelligent and self-powered devices is forecasted for our future everyday life, the implementation of energy-autonomous devices that can wirelessly communicate data from sensors is crucial. Even though techniques such as voltage scaling proved to effectively reduce the energy consumption of digital circuits, additional energy savings are still required for a longer battery life. One of the main limitations of essentially any low-energy technique is the potential degradation of the quality of service (QoS). Thus, a thorough understanding of how circuits behave when operated around the point of first failure (PoFF) is key for the effective application of conventional energy-efficient methods as well as for the development of future low-energy techniques. In this thesis, a variety of circuits, techniques, and tools is described to reduce the energy consumption in digital systems when operated either in the safe and conservative exact region, close to the PoFF, or even inside the inexact region. A straightforward approach to reduce the power consumed by clock distribution while safely operating in the exact region is dual-edge-triggered (DET) clocking. However, the DET approach is rarely taken, primarily due to the perceived complexity of its integration. In this thesis, a fully automated design flow is introduced for applying DET clocking to a conventional single-edge-triggered (SET) design. In addition, the first static true-single-phase-clock DET flip-flop (DET-FF) that completely avoids clock-overlap hazards of DET registers is proposed. Even though the correct timing of synchronous circuits is ensured in worst-case conditions, the critical path might not always be excited. Thus, dynamic clock adjustment (DCA) has been proposed to trim any available dynamic timing margin by changing the operating clock frequency at runtime. This thesis describes a dynamically-adjustable clock generator (DCG) capable of modifying the period of the produced clock signal on a cycle-by-cycle basis that enables the DCA technique. In addition, a timing-monitoring sequential (TMS) that detects input transitions on either one of the clock phases to enable the selection of the best timing-monitoring strategy at runtime is proposed. Energy-quality scaling techniques aimat trading lower energy consumption for a small degradation on the QoS whenever approximations can be tolerated. In this thesis, a low-power methodology for the perturbation of baseline coefficients in reconfigurable finite impulse response (FIR) filters is proposed. The baseline coefficients are optimized to reduce the switching activity of the multipliers in the FIR filter, enabling the possibility of scaling the power consumption of the filter at runtime. The area as well as the leakage power of many system-on-chips is often dominated by embedded memories. Gain-cell embedded DRAM (GC-eDRAM) is a compact, low-power and CMOS-compatible alternative to the conventional static random-access memory (SRAM) when a higher memory density is desired. However, due to GC-eDRAMs relying on many interdependent variables, the adaptation of existing memories and the design of future GCeDRAMs prove to be highly complex tasks. Thus, the first modeling tool that estimates timing, memory availability, bandwidth, and area of GC-eDRAMs for a fast exploration of their design space is proposed in this thesis