HopliteBuf FPGA Network-on-Chip: Architecture and Analysis

We can prove occupancy bounds of stall-free FIFOs used in deflection-free, low-cost, and high-speed FPGA overlay Network-on-chips (NoCs). In our work, we build on top of the HopliteRT livelock-free overlay NoC with an FPGA-friendly 2D unidirectional torus topology to propose the novel HopliteBuf NoC. In our new NoC, we strategically introduce stall-free FIFOs in the network and support these FIFOs with static analysis based on network calculus to compute FIFO occupancy, latency, and bandwidth bounds. The microarchitecture of HopliteBuf combines the performance benefits of conventional buffered NoCs (high throughput, low latency) with the cost advantages of deflection-routed NoCs (low FPGA area, high clock frequencies). Specifically, we look at two design variants of the HopliteBuf NoC: (1) Single corner-turn FIFO (W to S), and (2) Dual corner-turn FIFO (W to S+N). The single corner-turn (W to S) design is simpler and only introduces a buffering requirement for packets changing dimension from X ring to the downhill Y ring (or West to South). The dual corner-turn variant requires two FIFOs for turning packets going downhill (W to S) as well as uphill (W to N). The dual corner-turn design overcomes the mathematical analysis challenges associated with single corner-turn designs for communication workloads with cyclic dependencies between flow traversal paths at the expense of small increase in resource cost. Essentially, we resolve an analysis challenge with extra hardware resources. Across a range of 100 synthetically-generated workloads on a 5 x 5 NoC, HopliteBuf outperforms HopliteRT by 1.2-2x in terms of latency, 10% in terms of injection rate, and 30-60% in terms of flowset feasibiliy. These advantages come at the cost of 3-4x higher FPGA resource requirement for buffers and muxes. Our analysis also deliver latency bounds that are not only better than HopliteRT in absolute terms but also tighter by 2-3x allowing us to provision less hardware to meet our specifications

Wide area detection system: Conceptual design study

An integrated sensor for traffic surveillance on mainline sections of urban freeways is described. Applicable imaging and processor technology is surveyed and the functional requirements for the sensors and the conceptual design of the breadboard sensors are given. Parameters measured by the sensors include lane density, speed, and volume. The freeway image is also used for incident diagnosis

On-board B-ISDN fast packet switching architectures. Phase 1: Study

The broadband integrate services digital network (B-ISDN) is an emerging telecommunications technology that will meet most of the telecommunications networking needs in the mid-1990's to early next century. The satellite-based system is well positioned for providing B-ISDN service with its inherent capabilities of point-to-multipoint and broadcast transmission, virtually unlimited connectivity between any two points within a beam coverage, short deployment time of communications facility, flexible and dynamic reallocation of space segment capacity, and distance insensitive cost. On-board processing satellites, particularly in a multiple spot beam environment, will provide enhanced connectivity, better performance, optimized access and transmission link design, and lower user service cost. The following are described: the user and network aspects of broadband services; the current development status in broadband services; various satellite network architectures including system design issues; and various fast packet switch architectures and their detail designs

Network and Content Intelligence for 360 Degree Video Streaming Optimization

In recent years, 360° videos, a.k.a. spherical frames, became popular among users creating an immersive streaming experience. Along with the advances in smart- phones and Head Mounted Devices (HMD) technology, many content providers have facilitated to host and stream 360° videos in both on-demand and live stream- ing modes. Therefore, many different applications have already arisen leveraging these immersive videos, especially to give viewers an impression of presence in a digital environment. For example, with 360° videos, now it is possible to connect people in a remote meeting in an interactive way which essentially increases the productivity of the meeting. Also, creating interactive learning materials using 360° videos for students will help deliver the learning outcomes effectively. However, streaming 360° videos is not an easy task due to several reasons. First, 360° video frames are 4–6 times larger than normal video frames to achieve the same quality as a normal video. Therefore, delivering these videos demands higher bandwidth in the network. Second, processing relatively larger frames requires more computational resources at the end devices, particularly for end user devices with limited resources. This will impact not only the delivery of 360° videos but also many other applications running on shared resources. Third, these videos need to be streamed with very low latency requirements due their interactive nature. Inability to satisfy these requirements can result in poor Quality of Experience (QoE) for the user. For example, insufficient bandwidth incurs frequent rebuffer- ing and poor video quality. Also, inadequate computational capacity can cause faster battery draining and unnecessary heating of the device, causing discomfort to the user. Motion or cyber–sickness to the user will be prevalent if there is an unnecessary delay in streaming. These circumstances will hinder providing im- mersive streaming experiences to the much-needed communities, especially those who do not have enough network resources. To address the above challenges, we believe that enhancements to the three main components in video streaming pipeline, server, network and client, are essential. Starting from network, it is beneficial for network providers to identify 360° video flows as early as possible and understand their behaviour in the network to effec- tively allocate sufficient resources for this video delivery without compromising the quality of other services. Content servers, at one end of this streaming pipeline, re- quire efficient 360° video frame processing mechanisms to support adaptive video streaming mechanisms such as ABR (Adaptive Bit Rate) based streaming, VP aware streaming, a streaming paradigm unique to 360° videos that select only part of the larger video frame that fall within the user-visible region, etc. On the other end, the client can be combined with edge-assisted streaming to deliver 360° video content with reduced latency and higher quality. Following the above optimization strategies, in this thesis, first, we propose a mech- anism named 360NorVic to extract 360° video flows from encrypted video traffic and analyze their traffic characteristics. We propose Machine Learning (ML) mod- els to classify 360° and normal videos under different scenarios such as offline, near real-time, VP-aware streaming and Mobile Network Operator (MNO) level stream- ing. Having extracted 360° video traffic traces both in packet and flow level data at higher accuracy, we analyze and understand the differences between 360° and normal video patterns in the encrypted traffic domain that is beneficial for effec- tive resource optimization for enhancing 360° video delivery. Second, we present a WGAN (Wesserstien Generative Adversarial Network) based data generation mechanism (namely VideoTrain++) to synthesize encrypted network video traffic, taking minimal data. Leveraging synthetic data, we show improved performance in 360° video traffic analysis, especially in ML-based classification in 360NorVic. Thirdly, we propose an effective 360° video frame partitioning mechanism (namely VASTile) at the server side to support VP-aware 360° video streaming with dy- namic tiles (or variable tiles) of different sizes and locations on the frame. VASTile takes a visual attention map on the video frames as the input and applies a com- putational geometric approach to generate a non-overlapping tile configuration to cover the video frames adaptive to the visual attention. We present VASTile as a scalable approach for video frame processing at the servers and a method to re- duce bandwidth consumption in network data transmission. Finally, by applying VASTile to the individual user VP at the client side and utilizing cache storage of Multi Access Edge Computing (MEC) servers, we propose OpCASH, a mech- anism to personalize the 360° video streaming with dynamic tiles with the edge assistance. While proposing an ILP based solution to effectively select cached variable tiles from MEC servers that might not be identical to the requested VP tiles by user, but still effectively cover the same VP region, OpCASH maximize the cache utilization and reduce the number of requests to the content servers in congested core network. With this approach, we demonstrate the gain in latency and bandwidth saving and video quality improvement in personalized 360° video streaming

Network-aware video streaming for future media Internet

272 p

Mobile Oriented Future Internet (MOFI)

This Special Issue consists of seven papers that discuss how to enhance mobility management and its associated performance in the mobile-oriented future Internet (MOFI) environment. The first two papers deal with the architectural design and experimentation of mobility management schemes, in which new schemes are proposed and real-world testbed experimentations are performed. The subsequent three papers focus on the use of software-defined networks (SDN) for effective service provisioning in the MOFI environment, together with real-world practices and testbed experimentations. The remaining two papers discuss the network engineering issues in newly emerging mobile networks, such as flying ad-hoc networks (FANET) and connected vehicular networks

Recent Advances in Cellular D2D Communications

Device-to-device (D2D) communications have attracted a great deal of attention from researchers in recent years. It is a promising technique for offloading local traffic from cellular base stations by allowing local devices, in physical proximity, to communicate directly with each other. Furthermore, through relaying, D2D is also a promising approach to enhancing service coverage at cell edges or in black spots. However, there are many challenges to realizing the full benefits of D2D. For one, minimizing the interference between legacy cellular and D2D users operating in underlay mode is still an active research issue. With the 5th generation (5G) communication systems expected to be the main data carrier for the Internet-of-Things (IoT) paradigm, the potential role of D2D and its scalability to support massive IoT devices and their machine-centric (as opposed to human-centric) communications need to be investigated. New challenges have also arisen from new enabling technologies for D2D communications, such as non-orthogonal multiple access (NOMA) and blockchain technologies, which call for new solutions to be proposed. This edited book presents a collection of ten chapters, including one review and nine original research works on addressing many of the aforementioned challenges and beyond

ネットワーク キキ ノ ショウデンリョクカ ニ シスル デバイス アーキテクチャ ニ カンスル ケンキュウ

博士(工学)大阪市立大