Hazard-free clock synchronization

The growing complexity of microprocessors makes it infeasible to distribute a single clock source over the whole processor with a small clock skew. Hence, chips are split into multiple clock regions, each covered by a single clock source. This poses a problem for communication between these clock regions. Clock synchronization algorithms promise an advantage over state-of-the-art solutions, such as GALS systems. When clock regions are synchronous the communication latency improves significantly over handshake-based solutions. We focus on the implementation of clock synchronization algorithms. A major obstacle when implementing circuits on clock domain crossings are hazardous signals. We can formally define hazards by extending the Boolean logic by a third value u. In this thesis, we describe a theory for designing and analyzing hazard-free circuits. We develop strategies for hazard-free encoding and construction of hazard-free circuits from finite state machines. Furthermore, we discuss clock synchronization algorithms and a possible combination of them. In the end, we present two implementations of the GCS algorithm by Lenzen, Locher, and Wattenhofer (JACM 2010). We prove by rigorous analysis that the systems implement the algorithm. The theory described above is used to prove that our clock synchronization circuits are hazard-free (in the sense that they compute the most precise output possible). Simulation of our GCS system shows that it achieves a skew between neighboring clock regions that is smaller than a few inverter delays.Aufgrund der zunehmenden Komplexität von Mikroprozessoren ist es unmöglich, mit einer einzigen Taktquelle den gesamten Prozessor ohne großen Versatz zu takten. Daher werden Chips in mehrere Regionen aufgeteilt, die jeweils von einer einzelnen Taktquelle abgedeckt werden. Dies stellt ein Problem für die Kommunikation zwischen diesen Taktregionen dar. Algorithmen zur Taktsynchronisation bieten einen Vorteil gegenüber aktuellen Lösungen, wie z.B. GALS-Systemen. Synchronisiert man die Taktregionen, so verbessert sich die Latenz der Kommunikation erheblich. In Schaltkreisen zwischen zwei Taktregionen können undefinierte Signale, sogenannte Hazards auftreten. Indem wir die boolesche Algebra um einen dritten Wert u erweitern, können wir diese Hazards formal definieren. In dieser Arbeit zeigen wir eine Methode zum Entwurf und zur Analyse von hazard-freien Schaltungen. Wir entwickeln Strategien für Kodierungen die Hazards vermeiden und zur Konstruktion von hazard-freien Schaltungen. Darüber hinaus stellen wir Algorithmen Taktsynchronisation vor und wie diese kombiniert werden können. Zum Schluss stellen wir zwei Implementierungen des GCS-Algorithmus von Lenzen, Locher und Wattenhofer (JACM 2010) vor. Oben genannte Mechanismen werden verwendet, um formal zu beweisen, dass diese Implementierungen korrekt sind. Die Implementierung hat keine Hazards, das heißt sie berechnet die bestmo ̈gliche Ausgabe. Anschließende Simulation der GCS Implementierung erzielt einen Versatz zwischen benachbarten Taktregionen, der kleiner als ein paar Gatter-Laufzeiten ist

Structure discovery techniques for circuit design and process model visualization

Graphs are one of the most used abstractions in many knowledge fields because of the easy and flexibility by which graphs can represent relationships between objects. The pervasiveness of graphs in many disciplines means that huge amounts of data are available in graph form, allowing many opportunities for the extraction of useful structure from these graphs in order to produce insight into the data. In this thesis we introduce a series of techniques to resolve well-known challenges in the areas of digital circuit design and process mining. The underlying idea that ties all the approaches together is discovering structures in graphs. We show how many problems of practical importance in these areas can be solved utilizing both common and novel structure mining approaches. In the area of digital circuit design, this thesis proposes automatically discovering frequent, repetitive structures in a circuit netlist in order to improve the quality of physical planning. These structures can be used during floorplanning to produce regular designs, which are known to be highly efficient and economical. At the same time, detecting these repeating structures can exponentially reduce the total design time. The second focus of this thesis is in the area of the visualization of process models. Process mining is a recent area of research which centers on studying the behavior of real-life systems and their interactions with the environment. Complicated process models, however, hamper this goal. By discovering the important structures in these models, we propose a series of methods that can derive visualization-friendly process models with minimal loss in accuracy. In addition, and combining the areas of circuit design and process mining, this thesis opens the area of specification mining in asynchronous circuits. Instead of the usual design flow, which involves synthesizing circuits from specifications, our proposal discovers specifications from implemented circuits. This area allows for many opportunities for verification and re-synthesis of asynchronous circuits. The proposed methods have been tested using real-life benchmarks, and the quality of the results compared to the state-of-the-art.Els grafs són una de les representacions abstractes més comuns en molts camps de recerca, gràcies a la facilitat i flexibilitat amb la que poden representar relacions entre objectes. Aquesta popularitat fa que una gran quantitat de dades es puguin trobar en forma de graf, i obre moltes oportunitats per a extreure estructures d'aquest grafs, útils per tal de donar una intuïció millor de les dades subjacents. En aquesta tesi introduïm una sèrie de tècniques per resoldre reptes habitualment trobats en les àrees de disseny de circuits digitals i mineria de processos industrials. La idea comú sota tots els mètodes proposats es descobrir automàticament estructures en grafs. En la tesi es mostra que molts problemes trobats a la pràctica en aquestes àrees poden ser resolts utilitzant nous mètodes de descobriment d'estructures. En l'àrea de disseny de circuits, proposem descobrir, automàticament, estructures freqüents i repetitives en les definicions del circuit per tal de millorar la qualitat de les etapes posteriors de planificació física. Les estructures descobertes poden fer-se servir durant la planificació per produir dissenys regulars, que son molt més econòmics d'implementar. Al mateix temps, la descoberta i ús d'aquestes estructures pot reduir exponencialment el temps total de disseny. El segon punt focal d'aquesta tesi és en l'àrea de la visualització de models de processos industrials. La mineria de processos industrials es un tema jove de recerca que es centra en estudiar el comportament de sistemes reals i les interaccions d'aquests sistemes amb l'entorn. No obstant, quan d'aquest anàlisi s'obtenen models massa complexos visualment, l'estudi n'és problemàtic. Proposem una sèrie de mètodes que, gràcies al descobriment automàtic de les estructures més importants, poden generar models molt més fàcils de visualitzar que encara descriuen el comportament del sistema amb gran precisió. Combinant les àrees de disseny de circuits i mineria de processos, aquesta tesi també obre un nou tema de recerca: la mineria d'especificacions per circuits asíncrons. En l'estil de disseny asíncron habitual, sintetitzadors automàtics generen circuits a partir de les especificacions. En aquesta tesi proposem el pas invers: descobrir automàticament les especificacions de circuits ja implementats. Així, creem noves oportunitats per a la verificació i la re-síntesi de circuits asíncrons. Els mètodes proposats en aquesta tesi s'han validat fent servir dades obtingudes d'aplicacions pràctiques, i en comparem els resultats amb els mètodes existents

Vorhersagbares und zur Laufzeit adaptierbares On-Chip Netzwerk für gemischt kritische Echtzeitsysteme

The industry of safety-critical and dependable embedded systems calls for even cheaper, high performance platforms that allow flexibility and an efficient verification of safety and real-time requirements. To cope with the increasing complexity of interconnected functions and to reduce the cost and power consumption of the system, multicore systems are used to efficiently integrate different processing units in the same chip. Networks-on-chip (NoCs), as a modular interconnect, are used as a promising solution for such multiprocessor systems on chip (MPSoCs), due to their scalability and performance. For safety-critical systems, a major goal is the avoidance of hazards. For this, safety-critical systems are qualified or even certified to prove the correctness of the functioning under all possible cases. A predictable behaviour of the NoC can help to ease the qualification process of the system. To achieve the required predictability, designers have two classes of solutions: quality of service mechanisms and (formal) analysis. For mixed-criticality systems, isolation and analysis approaches must be combined to efficiently achieve the desired predictability. Traditional NoC analysis and architecture concepts tackle only a subpart of the challenges: they focus on either performance or predictability. Existing, predictable NoCs are deemed too expensive and inflexible to host a variety of applications with opposing constraints. And state-of-the-art analyses neglect certain platform properties to verify the behaviour. Together this leads to a high over-provisioning of the hardware resources as well as adverse impacts on system performance, and on the flexibility of the system. In this work we tackle these challenges and develop a predictable and runtime-adaptable NoC architecture that efficiently integrates mixed-critical applications with opposing constraints. Additionally, we present a modelling and analysis framework for NoCs that accounts for backpressure. This framework enables to evaluate the performance and reliability early at design time. Hence, the designer can assess multiple design decisions by using abstract models and formal approaches.Die Industrie der sicherheitskritischen und zuverlässigen eingebetteten Systeme verlangt nach noch günstigeren, leistungsfähigeren Plattformen, welche Flexibilität und eine effiziente Überprüfung der Sicherheits- und Echtzeitanforderungen ermöglichen. Um der zunehmenden Komplexität der zunehmend vernetzten Funktionen gerecht zu werden und die Kosten und den Stromverbrauch eines Systems zu reduzieren, werden Mehrkern-Systeme eingesetzt. On-Chip Netzwerke werden aufgrund ihrer Skalierbarkeit und Leistung als vielversprechende Lösung für solch Mehrkern-Systeme eingesetzt. Bei sicherheitskritischen Systemen ist die Vermeidung von Gefahren ein wesentliches Ziel. Dazu werden sicherheitskritische Systeme qualifiziert oder zertifiziert, um die Funktionsfähigkeit in allen möglichen Fällen nachzuweisen. Ein vorhersehbares Verhalten des on-Chip Netzwerks kann dabei helfen, den Qualifizierungsprozess des Systems zu erleichtern. Um die erforderliche Vorhersagbarkeit zu erreichen, gibt es zwei Klassen von Lösungen: Quality of Service Mechanismen und (formale) Analyse. Für Systeme mit gemischter Relevanz müssen Isolationsmechanismen und Analyseansätze kombiniert werden, um die gewünschte Vorhersagbarkeit effizient zu erreichen. Traditionelle Analyse- und Architekturkonzepte für on-Chip Netzwerke lösen nur einen Teil dieser Herausforderungen: sie konzentrieren sich entweder auf Leistung oder Vorhersagbarkeit. Existierende vorhersagbare on-Chip Netzwerke werden als zu teuer und unflexibel erachtet, um eine Vielzahl von Anwendungen mit gegensätzlichen Anforderungen zu integrieren. Und state-of-the-art Analysen vernachlässigen bzw. vereinfachen bestimmte Plattformeigenschaften, um das Verhalten überprüfen zu können. Dies führt zu einer hohen Überbereitstellung der Hardware-Ressourcen als auch zu negativen Auswirkungen auf die Systemleistung und auf die Flexibilität des Systems. In dieser Arbeit gehen wir auf diese Herausforderungen ein und entwickeln eine vorhersehbare und zur Laufzeit anpassbare Architektur für on-Chip Netzwerke, welche gemischt-kritische Anwendungen effizient integriert. Zusätzlich stellen wir ein Modellierungs- und Analyseframework für on-Chip Netzwerke vor, das den Paketrückstau berücksichtigt. Dieses Framework ermöglicht es, Designentscheidungen anhand abstrakter Modelle und formaler Ansätze frühzeitig beurteilen

A Framework for Industry 4.0

The potential of the Industry 4.0 will allow the national industry to develop all kinds of procedures, especially in terms of competitive differentiation. The prospects and motivations behind Industry 4.0 are related to the management that is essentially geared towards industrial internet, to the integrated analysis and use of data, to the digitalization of products and services, to new disruptive business models and to the cooperation within the value chain. It is through the integration of Cyber-Physical Systems (CPS), into the maintenance process that it is possible to carry out a continuous monitoring of industrial machines, as well as to apply advanced techniques for predictive and proactive maintenance. The present work is based on the MANTIS project, aiming to construct a specific platform for the proactive maintenance of industrial machines, targeting particularly the case of GreenBender ADIRA Steel Sheet. In other words, the aim is to reduce maintenance costs, increase the efficiency of the process and consequently the profit. Essentially, the MANTIS project is a multinational research project, where the CISTER Research Unit plays a key role, particularly in providing the communications infrastructure for one MANTIS Pilot. The methodology is based on a follow-up study, which is jointly carried with the client, as well as within the scope of the implementation of the ADIRA Pilot. The macro phases that are followed in the present work are: 1) detailed analysis of the business needs; 2) preparation of the architecture specification; 3) implementation/development; 4) tests and validation; 5) support; 6) stabilization; 7) corrective and evolutionary maintenance; and 8) final project analysis and corrective measures to be applied in future projects. The expected results of the development of such project are related to the integration of the industrial maintenance process, to the continuous monitoring of the machines and to the application of advanced techniques of preventive and proactive maintenance of industrial machines, particularly based on techniques and good practices of the Software Engineering area and on the integration of Cyber-Physical Systems.O potencial desenvolvido pela Indústria 4.0 dotará a indústria nacional de capacidades para desenvolver todo o tipo de procedimentos, especialmente a nível da diferenciação competitiva. As perspetivas e as motivações por detrás da Indústria 4.0 estão relacionadas com uma gestão essencialmente direcionada para a internet industrial, com uma análise integrada e utilização de dados, com a digitalização de produtos e de serviços, com novos modelos disruptivos de negócio e com uma cooperação horizontal no âmbito da cadeia de valor. É através da integração dos sistemas ciber-físicos no processo de manutenção que é possível proceder a um monitoramento contínuo das máquinas, tal como à aplicação de técnicas avançadas para a manutenção preditiva e pró-ativa das mesmas. O presente trabalho é baseado no projeto MANTIS, objetivando, portanto, a construção de uma plataforma específica para a manutenção pró-ativa das máquinas industriais, neste caso em concreto das prensas, que serão as máquinas industriais analisadas ao longo do presente trabalho. Dito de um outro modo, objetiva-se, através de uma plataforma em específico, reduzir todos os custos da sua manutenção, aumentando, portanto, os lucros industriais advindos da produção. Resumidamente, o projeto MANTIS consiste num projeto de investigação multinacional, onde a Unidade de Investigação CISTER desenvolve um papel fundamental, particularmente no fornecimento da infraestrutura de comunicação no Piloto MANTIS. A metodologia adotada é baseada num estudo de acompanhamento, realizado em conjunto com o cliente, e no âmbito da implementação do Piloto da ADIRA. As macro fases que são compreendidas por esta metodologia, e as quais serão seguidas, são: 1) análise detalhada das necessidades de negócio; 2) preparação da especificação da arquitetura; 3) implementação/desenvolvimento; 4) testes e validação; 5) suporte; 6) estabilização; 7) manutenção corretiva e evolutiva; e 8) análise final do projeto e medidas corretivas a aplicar em projetos futuros. Os resultados esperados com o desenvolvimento do projeto estão relacionados com a integração do processo de manutenção industrial, a monitorização contínua das máquinas e a aplicação de técnicas avançadas de manutenção preventiva e pós-ativa das máquinas, especialmente com base em técnicas e boas práticas da área de Engenharia de Software