Magnetic resonance imaging compatible non-invasive fibre-optic sensors based on the Bragg gratings and interferometers in the application of monitoring heart and respiration rate of the human body: A comparative study

The publication presents a comparative study of two fibre-optic sensors in the application of heart rate (HR) and respiratory rate (RR) monitoring of the human body. After consultation with clinical practitioners, two types of non-invasive measuring and analysis systems based on fibre Bragg grating (FBG) and fibre-optic interferometer (FOI) have been designed and assembled. These systems use probes (both patent pending) that have been encapsulated in the bio-compatible polydimethylsiloxane (PMDS). The main advantage of PDMS is that it is electrically non-conductive and, as well as optical fibres, has low permeability. The initial verification measurement of the system designed was performed on four subjects in a harsh magnetic resonance (MR) environment under the supervision of a senior radiology assistant. A follow-up comparative study was conducted, upon a consent of twenty volunteers, in a laboratory environment with a minimum motion load and discussed with a head doctor of the Radiodiagnostic Institute. The goal of the laboratory study was to perform measurements that would simulate as closely as possible the environment of harsh MR or the environment of long-term health care facilities, hospitals and clinics. Conventional HR and RR measurement systems based on ECG measurements and changes in the thoracic circumference were used as references. The data acquired was compared by the objective Bland-Altman (B-A) method and discussed with practitioners. The results obtained confirmed the functionality of the designed probes, both in the case of RR and HR measurements (for both types of B-A, more than 95% of the values lie within the +/- 1.96 SD range), while demonstrating higher accuracy of the interferometric probe (in case of the RR determination, 95.66% for the FOI probe and 95.53% for the FBG probe, in case of the HR determination, 96.22% for the FOI probe and 95.23% for the FBG probe).Web of Science1811art. no. 371

A Bottom-Up Review of Image Analysis Methods for Suspicious Region Detection in Mammograms.

Breast cancer is one of the most common death causes amongst women all over the world. Early detection of breast cancer plays a critical role in increasing the survival rate. Various imaging modalities, such as mammography, breast MRI, ultrasound and thermography, are used to detect breast cancer. Though there is a considerable success with mammography in biomedical imaging, detecting suspicious areas remains a challenge because, due to the manual examination and variations in shape, size, other mass morphological features, mammography accuracy changes with the density of the breast. Furthermore, going through the analysis of many mammograms per day can be a tedious task for radiologists and practitioners. One of the main objectives of biomedical imaging is to provide radiologists and practitioners with tools to help them identify all suspicious regions in a given image. Computer-aided mass detection in mammograms can serve as a second opinion tool to help radiologists avoid running into oversight errors. The scientific community has made much progress in this topic, and several approaches have been proposed along the way. Following a bottom-up narrative, this paper surveys different scientific methodologies and techniques to detect suspicious regions in mammograms spanning from methods based on low-level image features to the most recent novelties in AI-based approaches. Both theoretical and practical grounds are provided across the paper sections to highlight the pros and cons of different methodologies. The paper's main scope is to let readers embark on a journey through a fully comprehensive description of techniques, strategies and datasets on the topic

The First Global Integrated Marine Assessment: World Ocean Assessment I

We used satellite-derived sea-surface-temperature (SST) data along with in-situ data collected along a meridional transect between 18.85 and 20.25°N along 69.2°E to describe the evolution of an SST filament and front during 25 November to 1 December in the northeastern Arabian Sea (NEAS). Both features were ∼ 100 km long, lasted about a week and were associated with weak temperature gradients (∼ 0.07°C km⁻¹). The in-situ data were collected first using a suite of surface sensors during a north–south mapping of this transect and showed the existence of a chlorophyll maximum within the filament. This surface data acquisition was followed by a high-resolution south–north CTD (conductivity–temperature–depth) sampling along the transect. In the two days that elapsed between the two in-situ measurements, the filament had shrunk in size and moved northward. In general, the current direction was northwestward and advected these mesoscale features. The CTD data also showed an SST front towards the northern end of the transect. In both these features, the chlorophyll concentration was higher than in the surrounding waters. The temperature and salinity data from the CTD suggest upward mixing or pumping of water from the base of the mixed layer, where a chlorophyll maximum was present, into the mixed layer that was about 60 m thick. A striking diurnal cycle was evident in the chlorophyll concentration, with higher values tending to occur closer to the surface during the night. The in-situ data from both surface sensors and CTD, and so also satellite-derived chlorophyll data, showed higher chlorophyll concentration, particularly at sub-surface levels, between the filament and the front, but there was no corresponding signature in the temperature and salinity data. Analysis of the SST fronts in the satellite data shows that fronts weaker than those associated with the filament and the front had crossed the transect in this region a day or two preceding the sampling of the front

11th International Coral Reef Symposium Abstracts

https://nsuworks.nova.edu/occ_icrs/1001/thumbnail.jp

As Energias Renováveis na Transição Energética : Livro de Comunicações do XVII Congresso Ibérico e XIII Congresso Ibero-americano de Energia Solar

CIES2020: XVII Congresso Ibérico e XIII Congresso Ibero-Americano de Energia Solar, Lisboa, Portugal: LNEG, 3-5 Novembro, 2020.RESUMO: O CIES2020, reúne sob o lema da “As Energias Renováveis na Transição Energética”, refletindo uma conjuntura de mudança necessária e urgente em todos os sectores das nossas Sociedades, no nosso comportamento no uso da “Energia”, quer em termos individuais, nas famílias nas empresas e sobretudo na mudança de paradigma dos Sistemas Energéticos que impactam a todos os níveis, nas Cidades, nos Edifícios, nos Transportes, e onde o papel das Energias Renováveis assume um papel prioritário e principal, na luta contra as alterações climáticas, a descarbonização energética na defesa do Planeta e da sustentabilidade das futuras gerações. O CIES2020, apresentou-se com 3 tópicos principais: 1) As Energias Renováveis na Tran sição Energética; 2) As Energias Renováveis no Desenvolvimento Sustentável das Comunidades e 3) As Energias Renováveis a Sociedade e a Economia . Tentámos assim abranger todas as áreas tecnológicas das Energias Renováveis, as suas aplicações e utilizações, bem como os novos desafios futuros que estão a acontecer em termos de Inovação Tecnológica e respetivos impactos na Sociedade.info:eu-repo/semantics/publishedVersio

Formaciones imaginarias del diseñador gráfico en el discurso del campo académico.

En este trabajo se describe un proyecto de tesis doctoral en el que se analiza el discurso sobre el diseñador gráfico. Se parte del supuesto de que existe una tricotomía de su perfil: 1) el campo profesional, 2) el campo educativo y, 3) el campo académico. Proponemos que dicha tricotomía permite la identificación de imaginarios sobre el tema, y no solo eso, sino que también aporta elementos que conforman la identidad (Bauman, 2002) de un diseñador gráfico. La pregunta de investigación es ¿Cuál es la identidad discursiva del diseñador gráfico en el campo académico? La investigación descrita es de tipo cualitativo y deductivo; para la construcción la identidad discursiva (Van Dijk, T; 2008) del diseñador gráfico, se toman en cuenta diversas publicaciones: principalmente investigaciones y breves artículos difundidos en comunidades/foros de reflexión y debate en torno a la temática, además de memorias de congresos y libros. En apoyo al desarrollo del proyecto se ha diseñado un Laboratorio de Intervención en el Diseño, cuyos objetivos son impulsar el desarrollo social y cultural de los diseñadores gráficos por medio de la investigación, educación continua, producción y vinculación. En un primer acercamiento a las formaciones imaginarias (Pêcheux, 1978) sobre la identidad del diseñador gráfico se centran en el grado de erudición para la ejecución de su trabajo, en la cultura que demuestran y en la autonomía con la que producen