Hydrogen storage in nickel doped MCM-41

Hydrogen as an energy carrier is one of the best environmentally friendly alternatives to fossil fuel sources. The potential use of hydrogen results with increasing demand to hydrogen production and storage. Recent studies show that materials having high surface area, large pore size and high affinity to hydrogen have high hydrogen storage capacity. MCM-41 is silica based material having such properties and its hydrogen sorption properties can be improved by doping transition metals to the structure. Ni was chosen for this purpose as it is known with its hydrogen affinity. In this study, different amounts of Ni doped in MCM-41 that was produced by microwave heating to examine hydrogen storage capacity of Ni doped MCM-41 systems. The morphology and structure of the material was characterized by scanning electron microscope and X-ray diffraction analysis. Thermal stability of MCM-41 was examined by thermogravimetric analysis and it was seen that MCM-41s are hydrothermally stable. Surface area, pore size and adsorption capacity of MCM-41 were measured by Brunauer-Emmett-Teller (BET) method. It was observed that the material had large surface area around 1000 m2/g and roughly 2 nm pore size. It was found materials have uniform pore structure with hexagonal well-ordered arrangement. BET surface area, pore volume and pore diameters decreased as the metal loading increased. The hydrogen adsorption capacity measurements were achieved by the Intelligent Gravimetric Analyzer at room temperature and up to 10 bar pressure. It was observed that the hydrogen storage capacity of MCM-41 is strongly affected by metal doping

The Influence of Graphene Curvature on Hydrogen Adsorption: Towards Hydrogen Storage Devices

The ability of atomic hydrogen to chemisorb on graphene makes the latter a promising material for hydrogen storage. Based on scanning tunneling microscopy techniques, we report on site-selective adsorption of atomic hydrogen on convexly curved regions of monolayer graphene grown on SiC(0001). This system exhibits an intrinsic curvature owing to the interaction with the substrate. We show that at low coverage hydrogen is found on convex areas of the graphene lattice. No hydrogen is detected on concave regions. These findings are in agreement with theoretical models which suggest that both binding energy and adsorption barrier can be tuned by controlling the local curvature of the graphene lattice. This curvature-dependence combined with the known graphene flexibility may be exploited for storage and controlled release of hydrogen at room temperature making it a valuable candidate for the implementation of hydrogen-storage devices

Storage of hydrogen in nanostructured carbon materials

Recent developments focusing on novel hydrogen storage media have helped to benchmark nanostructured carbon materials as one of the ongoing strategic research areas in science and technology. In particular, certain microporous carbon powders, carbon nanomaterials, and specifically carbon nanotubes stand to deliver unparalleled performance as the next generation of base materials for storing hydrogen. Accordingly, the main goal of this report is to overview the challenges, distinguishing traits, and apparent contradictions of carbon-based hydrogen storage technologies and to emphasize recently developed nanostructured carbon materials that show potential to store hydrogen by physisorption and/or chemisorption mechanisms. Specifically touched upon are newer material preparation methods as well as experimental and theoretical attempts to elucidate, improve or predict hydrogen storage capacities, sorption–desorption kinetics, microscopic uptake mechanisms and temperature–pressure–loading interrelations in nanostructured carbons, particularly microporous powders and carbon nanotubes

Cryogenic Fluid Management Experiment (CFME) trunnion verification testing

The Cryogenic Fluid Management Experiment (CFME) was designed to characterize subcritical liquid hydrogen storage and expulsion in the low-g space environment. The CFME has now become the storage and supply tank for the Cryogenic Fluid Management Facility, which includes transfer line and receiver tanks, as well. The liquid hydrogen storage and supply vessel is supported within a vacuum jacket to two fiberglass/epoxy composite trunnions which were analyzed and designed. Analysis using the limited available data indicated the trunnion was the most fatigue critical component in the storage vessel. Before committing the complete storage tank assembly to environmental testing, an experimental assessment was performed to verify the capability of the trunnion design to withstand expected vibration and loading conditions. Three tasks were conducted to evaluate trunnion integrity. The first determined the fatigue properties of the trunnion composite laminate materials. Tests at both ambient and liquid hydrogen temperatures showed composite material fatigue properties far in excess of those expected. Next, an assessment of the adequacy of the trunnion designs was performed (based on the tested material properties)

Potential structural material problems in a hydrogen energy system

Potential structural material problems that may be encountered in the three components of a hydrogen energy system - production, transmission/storage, and utilization - were identified. Hydrogen embrittlement, corrosion, oxidation, and erosion may occur during the production of hydrogen. Hydrogen embrittlement is of major concern during both transmission and utilization of hydrogen. Specific materials research and development programs necessary to support a hydrogen energy system are described

Hydrogen on graphene: Electronic structure, total energy, structural distortions, and magnetism from first-principles calculations

Density functional calculations of electronic structure, total energy, structural distortions, and magnetism for hydrogenated single-layer, bilayer, and multi-layer graphene are performed. It is found that hydrogen-induced magnetism can survives only at very low concentrations of hydrogen (single-atom regime) whereas hydrogen pairs with optimized structure are usually nonmagnetic. Chemisorption energy as a function of hydrogen concentration is calculated, as well as energy barriers for hydrogen binding and release. The results confirm that graphene can be perspective material for hydrogen storage. Difference between hydrogenation of graphene, nanotubes, and bulk graphite is discussed.Comment: 8 pages 8 figures (accepted to Phys. Rev. B