Benzotriazole is antiestrogenic in vitro but not in vivo

Copyright © 2007 SETAC. This is the accepted version of the following article: Harris et al (2007), "Benzotriazole is antiestrogenic in vitro but not in vivo", Environmental Toxicology and Chemistry, 26(11), 2367–2372, which has been published in final form at the link below.Benzotriazole (BT) is an anticorrosive agent well known for its use in aircraft deicing and antifreeze fluids but also used in dishwasher detergents. It is highly persistent in the environment; therefore, BT is frequently found in runoff emanating from large airports as well as in the surrounding groundwater. In addition, BT has recently been found to be ubiquitous in Swiss wastewater treatment plant effluents and their receiving waters; however, very little chronic toxicity data is available on which to base a sound ecological risk assessment of this chemical. In vitro assays conducted using a recombinant yeast (anti-) estrogen assay indicated that BT possessed clear antiestrogenic properties. This chemical was approximately 100-fold less potent than Tamoxifen, which was used as a positive control. A subsequent in vivo study, however, involving analysis of vitellogenin induction and somatic indices in adult fathead minnows (Pimephales promelas) exposed to BT at concentrations of 10, 100, and 1,000 μg/L for two weeks showed no evidence of antiestrogenic activity by this compound. The possibility exists that higher concentrations of BT may yet induce the type of activity observed in vitro, although the concentrations used here already far exceed those reported in surface-water samples. Furthermore, adverse effects may be observed in fish or other organisms exposed to BT for a longer period than employed here, although such studies are costly and unlikely to be included in standard risk assessment procedures. A rigorous investigation of the chronic toxicity of BT is imperative

Comment on "Toxicological relevance of emerging contaminants for drinking water quality" by M. Schriks, M.B. Heringa, M.M.E. van der Kooi, P. de Voogt and A.P. van Wezel [Water Research 44 (2010) 461-476]

This is the post-print version of the final paper published in Water Research. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2011 Elsevier B.V.No abstract available

Current developments of nanoscale insight into corrosion protection by passive oxide films

Oxide passive films are a key for the durability of metals and alloys components as well as a central issue in corrosion science and engineering. Herein, we discuss current developments of the nanometer and sub-nanometer scale knowledge of the barrier properties and adsorption properties of passive oxide films brought by recent model experimental and theoretical investigations. The discussed aspects include (i) the chromium enrichment and its homogeneity at the nanoscale in passive films formed on Cr-bearing alloys such as stainless steel, (ii) the corrosion properties of grain boundaries in early intergranular corrosion before penetration and propagation in the grain boundary network, and (iii) the interaction of organic inhibitor molecules with incompletely passivated metallic surfaces. In all three cases, key issues are highlighted and future developments that we consider as most relevant are identified.Comment: Current Opinion in Solid State and Materials Science, Elsevier, final accepted preprin

Stabilized unsaturated polyesters

An unsaturated polyester, such as propylene glycolmaleic acid phthalic acid prepolymer dissolved in styrene is interpolymerized with an ultraviolet absorber and/or an antioxidant. The unsaturated chain may be filled with H or lower alkyl such as methyl and tertiary alkyl such as tertiary butyl. A polymer stable to exposure to the outdoors without degradation by ultraviolet radiation, thermal and/or photooxidation is formed

Thermal analysis of N-carbamoyl benzotriazole derivatives

Thermal properties of N-carbamoyl benzotriazole derivatives and N,N',N''-tribenzyloxyisocyanuric acid were investigated using thermogravimetric analysis and differential scanning calorimetry. The results revealed a difference between structural analogs of N-carbamoyl benzotriazole derivatives. They seem to be in agreement with the previously proposed formation of N,N',N''-tribenzyloxyisocyanuric acid from 1-(N-benzyloxycarbamoyl) benzotriazole, via an intermediary N-benzyloxyisocyanate acid, during heating. Substantially different thermal properties were observed for structural analogues, 1-(N-methoxycarbamoyl) benzotriazole and 1-(N-ethoxycarbamoyl) benzotriazole. In contrast to N-benzyloxyisocyanate, no corresponding reactions were observed for their decomposition products, i.e., methoxyisocyanate and ethoxyisocyanate

Polymerizable ultraviolet stabilizers for outdoor use

Polymeric materials that are stable enough to use outdoors without changes in excess of 20 years are investigated. Ultraviolet stabilizers or plastic materials were synthesized, polymerizable ultraviolet stabilizers, particularly of the 2(2-hydroxyphenyl)2H-benzotriazole family were prepared their polymerization, copolymerization and grafting onto other polymers were demonstrated, and ultraviolet stabilizing systems were devised. These materials were evaluated from the photophysical point of view

Interaction of bromide and organic antifoggants in development

Various levels of bromide and an organic antifoggant, benzotriazole, were combined in a developer and investigated to determine if an interaction existed. Both nitrogen burst agitation and viscous development were used. It was found that benzotriazole is such a strong antifoggant that interaction occurs only at low density levels, and the influence of benzotriazole increases with development time

Enzymatic synthesis of Tinuvin

Coupling of 3-(3-tert-butyl-4-hydroxyphenyl) propionic acid methylester to 1H-benzotriazole using a laccase from Trametes hirsuta was studied. The potentially resulting coupling product Tinuvin 1130 is an important UV-absorber used in polymer based materials. Oxidation of the phenol by the laccase led to homomolecular coupling reactions while the laccase did not attack 1H-benzotriazole. Due to the homomolecular reaction of the phenol in the presence of laccase coupling of phenol and 1H-benzotriazole was only observed when 1H-benzotriazole was applied in four-fold molar excess. The reaction was monitored by UV/vis spectroscopy, TLC and MS (ion trap) analysis. Coupling of 1H-benzotriazole took place in ortho position according to the postulated mechanism

Adding a structural context to the deprotometalation and trans-metal trapping chemistry of phenyl-substituted benzotriazole

Organometallic bases are becoming increasingly complex, because mixing components can lead to bases superior to single-component bases. To better understand this superiority, it is useful to study metalated intermediate structures prior to quenching. This study is on 1-phenyl-1H-benzotriazole, which was previously deprotonated by an in situ ZnCl2• TMEDA/LiTMP (TMEDA=N,N,N′,N′-tetramethylethylenediamine; TMP=2,2,6,6-tetramethylpiperidide) mixture and then iodinated. Herein, reaction with LiTMP exposes the deficiency of the single-component base as the crystalline product obtained was [{4-R-1-(2-lithiophenyl)-1H-benzotriazole• 3THF}2], [R=2-C6H4(Ph)NLi], in which ring opening of benzotriazole and N2 extrusion had occurred. Supporting lithiation by adding iBu2Al(TMP) induces trans-metal trapping, in which C-Li bonds transform into C-Al bonds to stabilise the metalated intermediate. X-ray diffraction studies revealed homodimeric [(4-R′-1-phenyl-1H-benzotriazole)2], [R′=(iBu)2Al(μ-TMP)Li], and its heterodimeric isomer [(4-R′-1-phenyl-1H-benzotriazole){2-R′-1-phenyl-1H-benzotriazole}], whose structure and slow conformational dynamics were probed by solution NMR spectroscopy