Motivating Employees Through Thick and Thin: The Relationship Between Hospital Employee Aspirations and Body Mass Index

The purpose of this study was to bridge the gap in the existing literature regarding the relationship between motivation and aspirations of obese and overweight employees. Based on data collected from 103 hospital employees, obese and overweight employees placed significantly lower importance on intrinsic aspirations than did their healthier counterparts. In addition, healthy, overweight, and obese employees all placed equal importance on extrinsic aspirations. The results of the study indicate that using intrinsic aspirations and rewards to motivate overweight and obese employees in a disease prevention program may be less effective than using an extrinsic reward system

Computation of theoretical brightness temperatures corresponding to the Cape Cod Canal radiometer measurements

Theoretical brightness temperatures are computed from the ground-truth data that was collected during the radiometer measurements of the Cape Cod Canal. An approximate correction for antenna pattern effects is made, and the results are compared with the radiometer measurements

Feasibility of observing Hanbury Brown and Twiss phase

The interferometers of Hanbury Brown and collaborators in the 1950s and 60s, and their modern descendants now being developed (intensity interferometers) measure the spatial power spectrum of the source from intensity correlations at two points. The quantum optical theory of the Hanbury Brown and Twiss (HBT) effect shows that more is possible, in particular the phase information can be recovered by correlating intensities at three points (bispectrum). In this paper we argue that such 3 point measurements are possible for bright stars such as Sirius and Betelgeuse using off the shelf single photon counters with collecting areas of the order of 100m2. It seems possible to map individual features on the stellar surface. Simple diameter measurements would be possible with amateur class telescopes.Comment: To appear in MNRA

Radar backscattering from a sea having an anisotropic large-scale surface, part 2

A two scale scattering model was derived that combines specular reflections from sea waves and Bragg scattering in a manner consistent with energy conservation. The effect of the tilting of the small scale roughness by the large scale roughness was included, which accounted for the reduction of reflected power. The special case of backscattering for which the transmitted polarization equaled the received polarization was considered. An anisotropic large scale surface was used to specify the probability density function of the large scale surface normal. In order to isolate the azimuthal variation of the normalized radar cross section produced by the anisotropic probability density function, an isotropical small scale spectrum was assumed

Deriving Earth science products from SSM/I

There are 3 components to this project. The first is the production of a quality controlled Level-1 data product for the Special Sensor Microwave Imager (SSM/I). Second is the generation of research quality ocean products. The 3rd component is studying the feasibility of obtaining both wind speed and wind direction from satellite microwave radiometers. The status of the three studies are discussed briefly. Time series of the SSM/I physical temperatures, receiver gains, and noise figures were studied in order to access the stability and integrity of the sensor data. A physically based retrieval algorithm was used to compute ocean products from the SSM/I Level-1 data. It simultaneously finds the near surface wind speed, the columnar water vapor, and the columnar liquid water. A wind direction signal was found in the SSM/I brightness temperature

New algorithms for microwave measurements of ocean winds

Improved second generation wind algorithms are used to process the three month SEASAT SMMR and SASS data sets. The new algorithms are derived without using in situ anemometer measurements. All known biases in the sensors prime measurements are removed, and the algorithms prime model functions are internally self-consistent. The computed SMMR and SASS winds are collocated and compared on a 150 km cell-by-cell basis, giving a total of 115444 wind comparisons. The comparisons are done using three different sets of SMMR channels. When the 6.6H SMMR channel is used for wind retrieval, the SMMR and SASS winds agree to within 1.3 m/s over the SASS primary swath. At nadir where the radar cross section is less sensitive to wind, the agreement degrades to 1.9 m/s. The agreement is very good for winds from 0 to 15 m/s. Above 15 m/s, the off-nadir SASS winds are consistently lower than the SMMR winds, while at nadir the high SASS winds are greater than SMMR's. When 10.7H is used for the SMMR wind channel, the SMMR/SASS wind comparisons are not quite as good. When the frequency of the wind channel is increased to 18 GHz, the SMMR/SASS agreement substantially degrades to about 5 m/s

Analytical studies of new airfoils for wind turbines

Computer studies were conducted to analyze the potential gains associated with utilizing new airfoils for large wind turbine rotor blades. Attempts to include 3-dimensional stalling effects were inconclusive. It is recommended that blade pressure measurements be made to clarify the nature of blade stalling. It is also recommended that new laminar flow airfoils be used as rotor blade sections

Furniture Fabrics

Exact date of bulletin unknown.PDF pages: 1

Performance and aerodynamic braking of a horizontal-axis wind turbine from small-scale wind tunnel tests

Wind tunnel tests of three 20" diameter, zero twist, zero pitch wind turbine rotor models were conducted in a 7' x 10' wind tunnel to determine the performance of such rotors with NACA 23024 and NACA 64 sub 3-621 airfoil sections. Aerodynamic braking characteristics of a 38% span, 30% chord, vented aileron configuration were measured on the NACA 23024 rotor. Surface flow patterns were observed using fluorescent mini-tufts attached to the suction side of the rotor blades. Experimental results with and without ailerons are compared to predictions using airfoil section data and a momentum performance code. Results of the performance studies show that the 64 sub 3-621 rotor produces higher peak power than the 23024 rotor for a given rotor speed. Analytical studies, however, indicate that the 23024 should produce higher power. Transition strip experiments show that the 23024 rotor is much more sensitive to roughness than the 64 sub 3-621 rotor. These trends agree with analytical predictions. Results of the aileron test show that this aileron, when deflected, produces a braking torque at all tip speed ratios. In free wheeling coastdowns the rotor blade stopped, then rotated backward at a tip speed ratio of -0.6

The Effect of Various Shoulder and Elbow Positions on Grip Strength

This study investigated the effect of various shoulder and elbow positions on grip strength in 42 subjects. Both dominant and non-dominant upper extremities were tested using the Jamar dynamometer. The subjects were tested in the following positions while standing: 1) 90 degrees shoulder flexion and 90 degrees elbow flexion, 2) 90 degrees shoulder flexion and full elbow extension, 3) 90 degrees shoulder abduction and 90 degrees elbow flexion, and 4) 90 degrees shoulder abduction and full elbow extension. A repeated-measures ANOVA showed that shoulder and elbow position does significantly (p\u3c.05) affect grip strength. A significant difference between genders was found for each position and hand dominance was significant (p\u3c.05) for position 2. Both males and females were strongest with their shoulder in 90 degrees of flexion. The findings suggest that 90 degrees of shoulder flexion may be more of a position of function than 90 degrees of abduction. When measuring grip strength, position of testing and gender are two important variables to consider when trying to help patients attain their highest grip strength score