Magnetic Control of Transmission and Helicity of Nano-Structured Optical Beams in Magnetoplasmonic Vortex Lenses

We theoretically investigate the generation of far-field propagating optical beams with a desired orbital angular momentum by using an archetypical magnetoplasmonic tip surrounded by a gold spiral slit. The use of a magnetic material can lead to important implications once magneto-optical activity is activated through the application of an external magnetic field. The physical model and the numerical study presented here introduce the concept of magnetically tunable plasmonic vortex lens, namely a magnetoplasmonic vortex lens, which ensures a tunable selectivity in the polarization state of the generated nanostructured beam. The presented system provides a promising platform for a localized excitation of plasmonic vortices followed by their beaming in the far-field with an active modulation of both light's transmittance and helicity

Universal hydrophilic coating of thermoplastic polymers currently used in microfluidics

A number of materials used to fabricate disposable microfluidic devices are hydrophobic in nature with water contact angles on their surface ranging from 80 to over 100. This characteristic makes them unsuitable for a number of microfluidic applications. Both the wettability and analyte adsorption parameters are highly dependent on the surface hydrophobicity. In this article, we propose a general method to coat the surface of five materials: polydimethylsiloxane (PDMS), cyclic olefin copolymer (COC), polyethylene terephthalate (PET), polycarbonate (PC), and polytetrafluoroethylene (PTFE). This fast and robust process, which is easily implementable in any laboratory including microfabrication clean room facilities, was devised by combining gas-phase and wet chemical modification processes. Two different coatings that improve the surface hydrophilicity were prepared via the "dip and rinse" approach by immersing the plasma oxidized materials into an aqueous solution of two different poly(dimethylacrylamide) copolymers incorporating a silane moiety and functionalized with either N-acryloyloxysuccinimide (NAS) (poly(DMA-NAS-MAPS) or glycidyl methacrylate (GMA) (poly(DMA-GMA-MAPS). The coating formation was confirmed by contact angle (CA) analysis comparing the variation of CAs of uncoated and coated surfaces subjected to different aging treatments. The antifouling character of the polymer was demonstrated by fluorescence and interferometric detection of proteins adsorbed on the surafce. This method is of great interest in microfluidics due to its broad applicability to a number of materials with varying chemical compositions

Modeling and estimating the economic and social impact of the results of the project Re-search Alps

The idea behind the Re-search Alps project has been conceived inside within the EUSALP Action Group 1 - “to develop an effective research and innovation ecosystem” (AG1). EUSALP is the EU-Strategy for the Alpine Region, which is composed of seven countries: Austria, France, Germany, Italy Liechtenstein, Slovenia and Switzerland. The strategy aims at ensuring mutually beneficial interactions between the mountain regions at its core and the surrounding lowlands and urban areas. The goal of the Re-search Alps project is the publication on the web of an open dataset describing the private and public laboratories, research and innovation centers (hereinafter, referred as “labs”, in short) existing in the seven aforementioned countries, with particular reference to the 48 Regions constituting the Alpine Area

Characteristics of cured lard of Cinta Senese pig fed acorn and chestnut

Cured lard is a typical Tuscan dry-cured product, generally obtained from pigs of improved breeds intensively reared. The employment of extensive system in pig rearing could represent a concrete possibility to increase the added value of lard, as well as of the other cured products. Moreover, the general belief of a greater quality of products derived from unimproved pigs, particularly when reared outdoors, has been experimentally supported particularly in Iberian (Carrapiso et al., 2003; Cava et al., 2000) and Corsican pig (Coutron-Gambotti et al., 1998)

Fecal N excretion as an approach to estimate forage intake by sheep and cattle.

This study was carried out to evaluate the reliability of using faecal N as a predictor of organic matter (OM) intake by sheep and cattle fed a natural pasture hay

High-sensitivity optical humidity sensor based on a thin dielectric waveguide

A low-cost, high-sensitivity humidity sensor based on a low-loss dielectric thin film waveguide (WG) is presented. The guided mode is produced by coupling laser light into the film by optical tunneling through a solid gap deposited on the base of a semi-cylindrical lens. The light reflected from this optical system carries information about the refractive index of the medium neighboring the WG, and is detected by a low-cost CCD linear sensor and analyzed with a microcontroller or personal computer. The technique presents good sensitivity to relative humidity (RH) changes, especially below 10% RH, linear behavior between 20% and 80% RH, and a response time of a few seconds.FAPESPCNP

Alternativas para redução de cobre em caldas usadas no controle do míldio da videira.

bitstream/item/130797/1/Circular-Tecnica-119.pd

Examining Neanderthal and carnivore occupations of Teixoneres Cave (Moià, Barcelona, Spain) using archaeostratigraphic and intra-site spatial analysis

Teixoneres Cave (Moia, Barcelona, Spain) is a reference site for Middle Palaeolithic studies of the Iberian Peninsula. The cave preserves an extensive stratigraphic sequence made up of eight units, which is presented in depth in this work. The main goal of this study is to undertake an initial spatial examination of Unit III, formed during Marine Isotope Stage 3, with the aim of understanding spatial organization and past activities developed by Neanderthals and carnivores (bears, hyenas and smaller carnivores). The total sample analysed includes 38,244 archaeological items and 5888 limestone blocks. The application of GIS tools allows us to clearly distinguish three geologically-defined stratigraphic subunits. Unit III has been previously interpreted as a palimpsest resulting from alternating occupation of the cave by human groups and carnivores. The distribution study shows that faunal specimens, lithic artefacts, hearths and charcoal fragments are significantly concentrated at the entrance of the cave where, it is inferred, hominins carried out different activities, while carnivores preferred the sheltered zones in the inner areas of the cave. The results obtained reveal a spatial pattern characterized by fire use related zones, and show that the site was occupied by Neanderthals in a similar and consistent way throughout the (>)7000 years range covered by the analysed subunits. This spatial pattern is interpreted as resulting from repeated short-term human occupations