209 research outputs found
Retention of ductility in high-strength steels
To produce high strength alloy steel with retention of ductility, include tempering, cooling and subsequent tempering. Five parameters for optimum results are pretempering temperature, amount of strain, strain rate, temperature during strain, and retempering temperature
A Six-year Image-subtraction Light Curve of SN 2010jl
SN 2010jl was a luminous Type IIn supernova (SN), detected in radio, optical, X-ray and hard X-rays. Here we report on its six-year R- and g-band light curves obtained using the Palomar Transient Factory. The light curve was generated using a pipeline based on the proper image-subtraction method and we discuss the algorithm performances. As noted before, the R-band light curve, up to about 300 days after maximum light is well described by a power-law decline with a power-law index of α ≈ −0.5. Between day 300 and day 2300 after maximum light, it is consistent with a power-law decline, with a power-law index of about α ≈ −3.4. The longevity of the light curve suggests that the massive circumstellar material around the progenitor was ejected on timescales of at least tens of years prior to the progenitor explosion
A Six-year Image-subtraction Light Curve of SN 2010jl
SN 2010jl was a luminous Type IIn supernova (SN), detected in radio, optical, X-ray and hard X-rays. Here we report on its six-year R- and g-band light curves obtained using the Palomar Transient Factory. The light curve was generated using a pipeline based on the proper image-subtraction method and we discuss the algorithm performances. As noted before, the R-band light curve, up to about 300 days after maximum light is well described by a power-law decline with a power-law index of α ≈ −0.5. Between day 300 and day 2300 after maximum light, it is consistent with a power-law decline, with a power-law index of about α ≈ −3.4. The longevity of the light curve suggests that the massive circumstellar material around the progenitor was ejected on timescales of at least tens of years prior to the progenitor explosion
Effect of deformation schedule on the microstructure and mechanical properties of a thermomechanically processed C-Mn-Si transformation-induced plasticity steel
Thermomechanical processing simulations were performed using a hot-torsion machine, in order to develop a comprehensive understanding of the effect of severe deformation in the recrystallized and nonrecrystallized austenite regions on the microstructural evolution and mechanical properties of the 0.2 wt pct C-1.55 wt pct Mn-1.5 wt pct Si transformation-induced plasticity (TRIP) steel. The deformation schedule affected all constituents (polygonal ferrite, bainite in different morphologies, retained austenite, and martensite) of the multiphased TRIP steel microstructure. The complex relationships between the volume fraction of the retained austenite, the morphology and distribution of all phases present in the microstructure, and the mechanical properties of TRIP steel were revealed. The bainite morphology had a more pronounced effect on the mechanical behavior than the refinement of the microstructure. The improvement of the mechanical properties of TRIP steel was achieved by variation of the volume fraction of the retained austenite rather than the overall refinement of the microstructure. <br /
Detecting Weak Spectral Lines in Interferometric Data through Matched Filtering
Modern radio interferometers enable observations of spectral lines with unprecedented spatial resolution and sensitivity. In spite of these technical advances, many lines of interest are still at best weakly detected and therefore necessitate detection and analysis techniques specialized for the low signal-to-noise ratio (S/N) regime. Matched filters can leverage knowledge of the source structure and kinematics to increase sensitivity of spectral line observations. Application of the filter in the native Fourier domain improves S/N while simultaneously avoiding the computational cost and ambiguities associated with imaging, making matched filtering a fast and robust method for weak spectral line detection. We demonstrate how an approximate matched filter can be constructed from a previously observed line or from a model of the source, and we show how this filter can be used to robustly infer a detection significance for weak spectral lines. When applied to ALMA Cycle 2 observations of CH3OH in the protoplanetary disk around TW Hya, the technique yields a ≈53% S/N boost over aperture-based spectral extraction methods, and we show that an even higher boost will be achieved for observations at higher spatial resolution. A Python-based open-source implementation of this technique is available under the MIT license at http://github.com/AstroChem/VISIBLE
The Detection of an Extremely Bright Fast Radio Burst in a Phased Array Feed Survey
We report the detection of an ultra-bright fast radio burst FRB)from a modest, 3.4-day pilot survey with the Australian Square Kilometre Array Pathfinder. The survey was conducted in a wide- field fly’s-eye configuration using the phased-array-feed technology deployed on the array to instantaneously observe an effective area of 160 deg2, and achieve an exposure totalling 13200 deg2 hr. We constrain the position of FRB 170107 to a region 8 ́ x 8 ́ in size(90% containment)and its fluence to be 58 ± 6 Jy ms. The spectrum of the burst shows a sharp cutoff above 1400 MHz, which could be due to either scintillation or an intrinsic feature of the burst. This confirms the existence of an ultra-bright (> 20 Jy ms) population of FRBs
MethPat: a tool for the analysis and visualisation of complex methylation patterns obtained by massively parallel sequencing
- …