2,161 research outputs found
Measured residual stress distributions for low and high heat input single weld beads deposited on to SA508 steel
Review of robust measurement of phosphorus in river water: sampling, storage, fractionation and sensitivity
International audienceThis paper reviews current knowledge on sampling, storage and analysis of phosphorus (P) in river waters. Potential sensitivity of rivers with different physical, chemical and biological characteristics (trophic status, turbidity, flow regime, matrix chemistry) is examined in terms of errors associated with sampling, sample preparation, storage, contamination, interference and analytical errors. Key issues identified include: The need to tailor analytical reagents and concentrations to take into account the characteristics of the sample matrix. The effects of matrix interference on the colorimetric analysis. The influence of variable rates of phospho-molybdenum blue colour formation. The differing responses of river waters to physical and chemical conditions of storage. The higher sensitivities of samples with low P concentrations to storage and analytical errors. Given high variability of river water characteristics in space and time, no single standardised methodology for sampling, storage and analysis of P in rivers can be offered. ?Good Practice' guidelines are suggested, which recommend that protocols for sampling, storage and analysis of river water for P is based on thorough site-specific method testing and assessment of P stability on storage. For wider sampling programmes at the regional/national scale where intensive site-specific method and stability testing are not feasible, ?Precautionary Practice' guidelines are suggested. The study highlights key areas requiring further investigation for improving methodological rigour. Keywords: phosphorus, orthophosphate, soluble reactive, particulate, colorimetry, stability, sensitivity, analytical error, storage, sampling, filtration, preservative, fractionation, digestio
Residual stress of as-deposited and rolled Wire + Arc Additive Manufacturing Ti–6Al–4V components
Wire + arc additive manufacturing components contain significant residual stresses, which manifest in distortion. High-pressure rolling was applied to each layer of a linear Ti–6Al–4V wire + arc additive manufacturing component in between deposition passes. In rolled specimens, out-of-plane distortion was more than halved; a change in the deposits' geometry due to plastic deformation was observed and process repeatability was increased. The Contour method of residual stresses measurements showed that although the specimens still exhibited tensile stresses (up to 500 MPa), their magnitude was reduced by 60%, particularly at the interface between deposit and substrate. The results were validated with neutron diffraction measurements, which were in good agreement away from the baseplate
2D mapping of plane stress crack-tip fields following an overload
The evolution of crack-tip strain fields in a thin (plane stress) compact tension sample following an
overload (OL) event has been studied using two different experimental techniques. Surface behaviour has been
characterised by Digital Image Correlation (DIC), while the bulk behaviour has been characterised by means of
synchrotron X-ray diffraction (XRD). The combination of both surface and bulk information allowed us to
visualise the through-thickness evolution of the strain fields before the OL event, during the overload event,
just after OL and at various stages after it. Unlike previous work, complete 2D maps of strains around the
crack-tip were acquired at 60m spatial resolution by XRD. The DIC shows less crack opening after overload
and the XRD a lower crack-tip peak stress after OL until the crack has grown past the compressive crack-tip
residual stress introduced by the overload after which the behaviour returned to that for the baseline fatigue
response. While the peak crack-tip stress is supressed by the compressive residual stress, the crack-tip stress
field changes over each cycle are nevertheless the same for all Kmax cycles except at OL
Review of robust measurement of phosphorus in river water: sampling, storage, fractionation and sensitivity
This paper reviews current knowledge on sampling, storage and analysis of phosphorus (P) in river waters. Potential sensitivity of rivers with different physical, chemical and biological characteristics (trophic status, turbidity, flow regime, matrix chemistry) is examined in terms of errors associated with sampling, sample preparation, storage, contamination, interference and analytical errors. Key issues identified include: The need to tailor analytical reagents and concentrations to take into account the characteristics of the sample matrix. The effects of matrix interference on the colorimetric analysis. The influence of variable rates of phospho-molybdenum blue colour formation. The differing responses of river waters to physical and chemical conditions of storage. The higher sensitivities of samples with low P concentrations to storage and analytical errors. Given high variability of river water characteristics in space and time, no single standardised methodology for sampling, storage and analysis of P in rivers can be offered. ‘Good Practice’ guidelines are suggested, which recommend that protocols for sampling, storage and analysis of river water for P is based on thorough site-specific method testing and assessment of P stability on storage. For wider sampling programmes at the regional/national scale where intensive site-specific method and stability testing are not feasible, ‘Precautionary Practice’ guidelines are suggested. The study highlights key areas requiring further investigation for improving methodological rigour. Keywords: phosphorus, orthophosphate, soluble reactive, particulate, colorimetry, stability, sensitivity, analytical error, storage, sampling, filtration, preservative, fractionation, digestio
Effects of stop-start features on residual stresses in a multipass austenitic stainless steel weld
Recommended from our members
Balancing macronutrient stoichiometry to alleviate eutrophication
Reactive nitrogen (N) and phosphorus (P) inputs to surface waters modify aquatic environments and affect public health and recreation. Until now, source control is the dominating measure of eutrophication management, and biological regulation of nutrients is largely neglected, although aquatic microbial organisms have huge potential to process nutrients. The stoichiometric ratio of organic carbon (OC) to N to P atoms should modulate heterotrophic pathways of aquatic nutrient processing, as high OC availability favours aquatic microbial processing. Such microbial processing removes N by denitrification and captures N and P as organically-complexed, less eutrophying forms. With a global data synthesis, we show that the atomic ratios of bioavailable dissolved OC to either N or P in rivers with urban and agricultural land use are often distant from a ‘microbial optimum’. This OC-deficiency relative to high availabilities of N and P likely overwhelms within-river heterotrophic processing and we propose that the capability of streams and rivers to retain N and P may be improved by active stoichiometric rebalancing. This rebalancing should be done by reconnecting appropriate OC sources such as wetlands and riparian forests, many of which have become disconnected from rivers concurrent to the progress of agriculture and urbanization. However, key knowledge gaps leave questions in the safe implementation of this approach in management: Mechanistic research is required to (i) evaluate system responses to catchment inputs of dissolved OC forms and amounts relative to internal-cycling controls of dissolved OC from aquatic production and particulate OC from aquatic and terrestrial sources and (ii) evaluate risk factors in anoxia-mediated P desorption with elevated OC scenarios. Still, we find this to be an approach with high potential for river management and we recommend to evaluate this stoichiometric approach for alleviating eutrophication, improving water quality and aquatic ecosystem health
Rate-controlling processes during environment-sensitive crack propagation in aluminum
Recent experimental findings are challenging today’s conventional view on the rate-controlling processes during environment-sensitive crack growth in aluminum alloys when exposed to moist air and aqueous environments. X-ray computed tomography has revealed the detailed crack morphology of several stress corrosion cracks in 7000 series alloys and this has shown that the complexity of the mesoscale is incredibly important to understand the links between the gross morphology of the crack and the crack front/tip. We will show the large local variation that exists in the crack morphology. At the same time we will show how average measurements of crack velocity and crack opening displacement remain surprisingly uniform across the width of the crack. Discussion will follow in an effort to quantify the effect of Keffective compared to Kapplied and to provide a rationalization of these findings with respect to previously published theories
Modularised process-based modelling of phosphorus loss at farm and catchment scale
In recent years, a co-ordinated programme of data collection has resulted in the collation of sub-hourly time-series of hydrological, sediment and phosphorus loss data, together with soil analysis, cropping and management information for two small (< 200 ha) headwater agricultural catchments in the UK Midlands (Rosemaund, Herefordshire and Cliftonthorpe, Leicestershire). These data sets have allowed the dynamics of phosphorus loss to be characterised and the importance of both storm runoff and drainflow to be identified, together with incidental losses following manure and fertiliser additions in contributing to total annual loss. A modularised process-based model has been developed to represent current understanding of the dynamics of phosphorus loss. Modules describing runoff and sediment generation and associated phosphorus adsorption/desorption dynamics are described and tested. In the model, the effect of a growing crop on sediment detachment processes is represented and the stability of topsoil is considered so that, overall, the model is responsive to farm management factors. Importantly, using data sets available from national-scale survey programmes to estimate model parameters, a transferable approach is presented, requiring only sub-hourly rainfall data and field-specific landcover information for application of the model to new sites. Results from application of the model to the hydrological year 1998–99 are presented. Assessment of performance, which suggests that the timing of simulated responses is acceptable, has focused attention on quantifying landscape and in-stream retention and remobilisation processes.</b></p> <p style='line-height: 20px;'><b>Keywords: </b>phosphorus, erosion, process-based modelling, agricultur
- …