120 research outputs found
Review of the frequency stabilization of TEA CO2 laser oscillators
Most applications of TEA CO2 lasers in heterodyne radar systems require that the transmitter has a high degree of frequency stability. This ensures good Doppler resolution and maximizes receiver sensitivity. However, the environment within the device is far from benign with fast acoustic and electrical transients being present. Consequently the phenomena which govern the frequency stability of pulsed lasers are quite different from those operative in their CW counterparts. This review concentrates on the mechanisms of chirping within the output pulse; pulse to pulse frequency drift may be eliminated by frequency measurement and correction on successive pulses. It emerges that good stability hinges on correct cavity design. The energy-dependent laser-induced frequency sweep falls dramatically as mode diameter is increased. Thus, it is necessary to construct resonators with good selectivity for single mode operation while having a large spot size
Higher education funding for 2011-12 and beyond
This letter [sent to Tim Melville-Ross CBE, Chairman, Higher Education Funding Council for England] provides details of the allocations that the Coalition Government will make to the Higher Education Funding Council for England (HEFCE) for 2011-12 and the priorities set. It also gives indicative funding totals for 2012-13 and the main budget aggregates for the remaining years of the Spending Review, with confirmed allocations for science and research resource funding for four years. The authors are providing these indicative future figures to assist the sector with forward planning, and to show how increased tuition income routed through students will substitute for reduced HEFCE grant funding over the period. Allocations are made subject to the financial delegations and information requirements that will be set out in a Management Letter to the Council in early 2011, and the Secretary of State's approval of HEFCE's Key Performance Targets by spring 2011
Pulsed-discharge carbon dioxide lasers
The purpose is to attempt a general introduction to pulsed carbon dioxide lasers of the kind used or proposed for laser radar applications. Laser physics is an excellent example of a cross-disciplinary topic, and the molecular spectroscopy, energy transfer, and plasma kinetics of the devices are explored. The concept of stimulated emission and population inversions is introduced, leading on to the molecular spectroscopy of the CO2 molecule. This is followed by a consideration of electron-impact pumping, and the pertinent energy transfer and relaxation processes which go on. Since the devices are plasma pumped, it is necessary to introduce a complex subject, but this is restricted to appropriate physics of glow discharges. Examples of representative devices are shown. The implications of the foregoing to plasma chemistry and gas life are discussed
How longitudinal analysis helps us understand why the younger generation’s living standards are faltering
Younger generations are currently experiencing work uncertainty, slower pay progression, and are finding it more difficult to own a house compared to their predecessors. Lord David Willetts explains how longitudinal analysis helps us expand our understanding of intergenerational differences and where policy to address these might focus
Developing our capability in cyber security: Academic Centres of Excellence in Cyber Security Research
Dissociation phenomena in electron-beam sustained carbon dioxide lasers
A number of applications are emerging requiring efficient, long pulse, long-life sealed CO2 lasers. Examples include the proposed NASA and ESA wind lidars. Electron-beam sustained discharge devices are strong contenders. Unlike self-sustained discharges, e-beam sustenance readily provides efficient performance from large volume discharges and offers pulse lengths well in excess of the microsecond or so generally associated with self-sustained devices. In the case of the e-beam sustained laser, since the plasma is externally maintained and operated at electric field strengths less than that associated with the glow to arc transition, the discharges can be run even in the presence of strongly attacking species such as O2. Build up of large levels of attacking contaminants is nevertheless undesirable as their presence reduces the current drawn by the plasma and thus the pumping rate to the upper laser level. The impedance rise leads to a mismatch of the pulse forming network with a consequent loss of control over energy deposition, operating E/N, and gain. Clearly CO2 dissociation rates, the influence of dissociation products on the discharge and gain, and tolerance of the discharge to these products need to be determined. This information can then be used to assess co-oxidation catalyst requirements for sealed operation
Closed-Cycle, Frequency-Stable CO2 Laser Technology
These proceedings contain a collection of papers and comments presented at a workshop on technology associated with long-duration closed-cycle operation of frequency-stable, pulsed carbon dioxide lasers. This workshop was held at the NASA Langley Research Center June 10 to 12, 1986. The workshop, jointly sponsored by the National Aeronautics and Space Administration (NASA) and the Royal Signals and Radar Establishment (RSRE), was attended by 63 engineers and scientists from the United States and the United Kingdom. During the 2 1/2 days of the workshop, a number of issues relating to obtaining frequency-stable operation and to the catalytic control of laser gas chemistry were discussed, and specific recommendations concerning future activities were drafted
Photoacoustic spectroscopy for remote detection of liquid contamination
The remote detection and identification of liquid chemical contamination is a difficult problem for which no satisfactory solution has yet been found. We have investigated a new technique, pulsed indirect photoacoustic spectroscopy (PIPAS), and made an assessment of its potential for operation at stand-off ranges of order 10m. The method involves optical excitation of the liquid surface with a pulsed laser operating in the 9-11μm region. Pulse lengths are of order 3μs, with energy ∼300μJ and repetition rates ∼200Hz. Rapid heating of the liquid by the laser pulse produces acoustic emission at the surface, and this is detected by a sensitive directional microphone to increase the signal-to-noise ratio and reduce background clutter. The acoustic pulse strength is related to the liquid's absorption coefficient at the laser wavelength; tuning allows spectroscopic investigation and a means of chemical identification. Maximum coverage rates have been examined, and further experiments have examined the specificity of the technique, allowing a preliminary assessment of false-alarm and missed-signal rates. The practical aspects of applying the technique in a field environment have been assessed
- …