4,072 research outputs found
Development of a Wöhler-like approach to quantify the Ti(CxNy) coatings durability under oscillating sliding conditions
The selection of a proper material for the particular engineering application is a complex problem, as different materials offer unique properties and it is not possible to gather all useful characteristics in a single one. Hence, employment of different surface treatment processes is a widely used alternative solution. In many industrial applications, coating failure may be conducive to catastrophic consequences. Thus, to prevent the component damage it is essential to establish the coating endurance and indicate the safe running time of coated system. To this study PVD TiC, TiN and TiCN hard coatings have been selected and tested against polycrystalline alumina smooth ball. The series of fretting tests with reciprocating sliding at the frequency 5Hz have been carried out under 50-150N normal loads and under wide rage of constant as well as variable displacement amplitudes from 50µm to 200µm at a constant value of relative humidity of 50% at 296K temperature. To quantify the loss of material a dissipated energy approach has been applied where the wear depth evolution is referred to the cumulative density of friction work dissipated during the test. Different dominant damage mechanisms have been indicated for the investigated hard coatings, which is debris formation and ejection in case of TiC coating and progressive wear accelerated by cracking phenomena in case of TiN and TiCN coatings. Energy-Wöhler wear chart has been introduced, in which the critical 1 dissipated energy density corresponds to the moment when the substrate is reached after a given number of fretting cycles. Two different methods to determine the critical dissipated energy density are introduced and compared. The Energy-Wöhler approach has been employed not only to compare the global endurance of the investigated systems but also to compare the intrinsic wear properties of the coatings. It has been shown that the fretting wear process is accelerated by the stress-controlled spalling phenomenon below a critical residual thickness and a severe decohesion mechanism is activated. Finally the applicability of the investigated method to other coated systems subjected to wear under sliding conditions is discussed and analyzed. The perspectives of this new approach are elucidated
A review of water quality issues influencing the habitat quality in dugong protection areas
In August 1997, the Commonwealth and Queensland Governments established 16
coastal Dugong Protection Areas (DPAs) to reduce the threat of mesh nets to dugongs
(Dugong dugon). The DPAs are situated in the Central and Mackay/Capricorn
Sections of the Great Barrier Reef Marine Park (GBRMP) and the Hervey Bay–Great
Sandy Strait region (Figure 1), and were enacted by Regulation No. 11 (1997) under
the Queensland Fisheries Act 1994 and the Nature Conservation (Dugong) Conservation
Plan 1999 under the Nature Conservation Act 1992. The establishment of DPAs was
considered the key strategy to address the rapid decline of the Great Barrier Reef
(GBR) dugong population south of Cooktown
Report on status and trends of water quality and ecosystem health in the Great Barrier Reef World Heritage Area
Contributors: Rob Coles, Steve Delean, Miles Furnas, Len McKenzie, Munro Mortimer, Jochen Muller, Andrew Negri, Hugh Sweatman and Angus Thompson
Division of the bivalved mollusca described by James Dwight Dana 1847-1849 from the Permian of eastern Australia
The Permian Bivalvia collected and described by J.D. Dana (1847, 1849) from the Sydney Basin, New South Wales, Australia are revised and illustrated from the collections at the Smithsonian Institution, Washington, D.C. The morphology of some genera erected by Dana (1847) is clarified, and some of the obscure species, such as Pecten mitis, Astarte gemma, and Pholadomya glendonensis are redescribed. Statistical summaries are presented for some of the species with controversial limits, such as Pyramus myiformis Dana, Notomya securiformis M’Coy, and various species of Astartila. Newly proposed names are Polidevcia cryptica for Nucula concinna Dana, 1847 not Nucula concinna Sowerby, 1836; and Astartila runnegari for Pachydomus ovalis M’Coy, November 1847, not Pachydomus ovalis Sowerby, February 1847, the latter new name a subjective synonym of Astartila intrepida Dana
Spatial Curvature Falsifies Eternal Inflation
Inflation creates large-scale cosmological density perturbations that are
characterized by an isotropic, homogeneous, and Gaussian random distribution
about a locally flat background. Even in a flat universe, the spatial curvature
measured within one Hubble volume receives contributions from long wavelength
perturbations, and will not in general be zero. These same perturbations
determine the Cosmic Microwave Background (CMB) temperature fluctuations, which
are O(10^-5). Consequently, the low-l multipole moments in the CMB temperature
map predict the value of the measured spatial curvature \Omega_k. On this basis
we argue that a measurement of |\Omega_k| > 10^-4 would rule out slow-roll
eternal inflation in our past with high confidence, while a measurement of
\Omega_k < -10^-4 (which is positive curvature, a locally closed universe)
rules out false-vacuum eternal inflation as well, at the same confidence level.
In other words, negative curvature (a locally open universe) is consistent with
false-vacuum eternal inflation but not with slow-roll eternal inflation, and
positive curvature falsifies both. Near-future experiments will dramatically
extend the sensitivity of \Omega_k measurements and constitute a sharp test of
these predictions.Comment: 16+2 pages, 2 figure
Synonymy and stratigraphic ranges of Belemnopsis in the Heterian and Ohauan Stages (Callovian-Tithonian), southwest Auckland, New Zealand.
Belemnopsis stevensi, Belemnopsis maccrawi, and Belemnopsis sp. A (Challinor 1979a) are synonymous; B. stevensi has priority. New belemnite material from Kawhia Harbour and Port Waikato, together with graphical study methods, indicates that many small fragmentary specimens associated with B. stevensi in the lower part of its stratigraphic range are probably the same taxon. B. stevensi has been found only in the Middle and Upper Heterian Stage (Lower Kimmeridgian) at Kawhia and only in the Lower Ohauan Stage (Upper Kimmeridgian) at Port Waikato. This apparently disjunct distribution is attributed to poor exposure in the relevant sections. Belemnopsis kiwiensis n.sp., Belemnopsis cf. sp. B, Belemnopsis sp. B, Belemnopsis sp. D, and Belemnopsis spp. are associated with B. stevensi near the lowest known point in its stratigraphic range. The distribution of stratigraphically useful belemnites within the Heterian and Ohauan Stages is: Conodicoelites spp. (Lower Heterian; correlated with Lower Callovian); Belemnopsis annae (Lower and Middle Heterian; Lower Callovian/Lower Kimmeridgian); Belemnopsis stevensi (Middle Heterian/Lower Ohauan; Kimmeridgian); Belemnopsis keari (Upper Heterian; Kimmeridgian); Belemnopsis trechmanni (Upper Ohauan; Upper Kimmeridgian/Middle Tithonian). The apparently extreme range of Belemnopsis annae remains unexplained. Klondyke Sandstone (new) is recognised as the basal member of Moewaka Formation (Port Waikato area)
Antioxidants in white wine (cv. Riesling): I. Comparison of different testing methods for antioxidant activity
This paper provides a study on different testing methods for antioxidant activity. Four commonly used methods (LDL oxidation, TAS measurement, beta-carotene bleaching as well as a rapid screening test published by PRYOR et al. 1993) are compared on the basis of a set of model compounds. The differing results concerning the ranking order of the tested substances are discussed. Furthermore three methods which showed appropriate results were used in order to determine the antioxidant activity of Riesling wine fractions
- …