12,402 research outputs found
High density circuit technology
Acquisition of polyimide materials for inter-metal dielectrics was obtained from three vendors, with considerable evaluation conducted on the Dupont PI2550 material. Experimental results indicate this material can be patterned using contact printing to line width far below 0.1 mils. Optimum line width is acquired using plasma etch equipment. Metal lift-off experiments on thermal evaporated films were optimized for application to sputtered deposited films. Alternate metal-lift-off experiments are proposed for future investigation. Dry processing equipment studies and future trends in VLSI fabrication techniques are on-going
High density circuit technology
Polyimide dielectric materials were acquired for comparative and evaluative studies in double layer metal processes. Preliminary experiments were performed. Also, the literature indicates that sputtered aluminum films may be successfully patterned using the left-off technique provided the substrate temperature remains low and the argon pressure in the chamber is relatively high at the time of sputtering. Vendors associated with dry processing equipment are identified. A literature search relative to future trends in VLSI fabrication techniques is described
Approaches to optimization of SS/TDMA time slot assignment
Reduction techniques for traffic matrices are explored in some detail. These matrices arise in satellite switched time-division multiple access (SS/TDMA) techniques whereby switching of uplink and downlink beams is required to facilitate interconnectivity of beam zones. A traffic matrix is given to represent that traffic to be transmitted from n uplink beams to n downlink beams within a TDMA frame typically of 1 ms duration. The frame is divided into segments of time and during each segment a portion of the traffic is represented by a switching mode. This time slot assignment is characterized by a mode matrix in which there is not more than a single non-zero entry on each line (row or column) of the matrix. Investigation is confined to decomposition of an n x n traffic matrix by mode matrices with a requirement that the decomposition be 100 percent efficient or, equivalently, that the line(s) in the original traffic matrix whose sum is maximal (called critical line(s)) remain maximal as mode matrices are subtracted throughout the decomposition process. A method of decomposition of an n x n traffic matrix by mode matrices results in a number of steps that is bounded by n(2) - 2n + 2. It is shown that this upper bound exists for an n x n matrix wherein all the lines are maximal (called a quasi doubly stochastic (QDS) matrix) or for an n x n matrix that is completely arbitrary. That is, the fact that no method can exist with a lower upper bound is shown for both QDS and arbitrary matrices, in an elementary and straightforward manner
Groups Excluded from ‘Representative’ Household Surveys: An Analysis Based on Remittances Sent and Received in Vietnam
The Vietnam Living Standard Surveys (VLSS) are supposed to be representative of the entire population in Vietnam. However, we uncover an anomaly that the amount of remittances received from domestic sources is significantly larger than the amount of remittances sent to domestic sources, implying that the survey is at least not representative of remittance senders. By further exploring a unique characteristic of the survey questions about remittances, we determine that, in particular, female and urban-dwelling remittance senders are underrepresented in the survey.
Post heat treatment effects on double layer metal structures for VLSI applications
The realization of high yield double layer metal systems using wet chemistry processes and the ability to extend yields beyond that attainable with wet chemistry by means of post sintering processes at temperatures below 500 C for potential applications in very large scale integration structures were studied. Yields in excess of 98% and average total contact resistance of less than 150 ohms and 200 ohms were realized for a series of 560 vias of 0.5 X 0.5 mils and 0.2 X 0.2 mils in size, respectively
SIZE AND BAG LIMITS IN RECREATIONAL FISHERIES: THEORETICAL AND EMPIRICAL ANALYSIS
Size and bag limits are among the most common forms of regulations for recreational fisheries. In this paper, we theoretically study and compare the short- and long-term impacts of these policies on individual anglers and fish stocks. Particular attention is paid to the issue of release mortality, which can have important consequences for policy effectiveness. Theoretically, we show the conditions under which these policies will be successful in achieving biological objectives. Implications for recreation demand analysis are discussed. We also study these policies using a simulation model of various policy combinations for the Gulf of Mexico red snapper fishery.Resource /Energy Economics and Policy,
Characteristics of total suspended matter and associated hydrocarbon concentration adjacent to the Chesapeake Bay entrance
Methodologies used to determine concentrations of hydrocarbons and associated suspended particulates at stations in and adjacent to the entrance to the Chesapeake Bay are described and the results are presented. Passive and active remote sensing data were acquired in conjunction with sea truth data collection
Black hole quasinormal modes using the asymptotic iteration method
In this article we show that the asymptotic iteration method (AIM) allows one
to numerically find the quasinormal modes of Schwarzschild and Schwarzschild de
Sitter (SdS) black holes. An added benefit of the method is that it can also be
used to calculate the Schwarzschild anti-de Sitter (SAdS) quasinormal modes for
the case of spin zero perturbations. We also discuss an improved version of the
AIM, more suitable for numerical implementation.Comment: 10 pages, LaTeX; references added; substantially expanded versio
Graviton emission from simply rotating Kerr-de Sitter black holes: Transverse traceless tensor graviton modes
In this article we present results for tensor graviton modes (in seven
dimensions and greater, ) for greybody factors of Kerr-dS black holes
and for Hawking radiation from simply rotating (n+4)-dimensional Kerr black
holes. Although there is some subtlety with defining the Hawking temperature of
a Kerr-dS black hole, we present some preliminary results for emissions
assuming the standard Hawking normalization and a Bousso-Hawking-like
normalization.Comment: 12 pages, 18 figure
- …