10,394 research outputs found
Finite element analysis of second order wave resonance by multiple cylinders in a uniform current
The purpose of this paper is to study the diffraction of second order Stokes waves by four cylinders in a uniform current and mainly focus on the near-trapping phenomenon. A time domain second-order theory is employed to establish the mathematical Smodel by splitting the total potential into the disturbed velocity potential caused by current, the first- or linear and second-order potentials, which satisfy their own boundary conditions. Each potential is calculated through the finite element method (FEM). Numerical results for four bottom-mounted cylinders in a uniform current are provided to show the resonant behaviour of waves and hydrodynamic forces including linear and second order at near-trapped frequencies, and the current effect on the wave and force are also analysed and discussed. Some results for a single- and four-cylinder cases are compared with previous studies
General Monogamy Relation for the Entanglement of Formation in Multiqubit Systems
published_or_final_versio
Hierarchical monogamy relations for the squared entanglement of formation in multipartite systems
published_or_final_versio
Progressive pulmonary hypertension in cyanotic congenital heart disease with severe pulmonary stenosis
We report the progressive development of pulmonary hypertension despite the presence of severe pulmonary stenosis in three patients with cyanotic congenital heart disease. The associated intracardiac lesions were complete transposition with a ventricular septal defect, double outlet right ventricle, and a heart with univentricular atrioventricular connection, respectively. Serial measurements on hemodynamics andhistological findings documented the progression of pulmonary hypertension and pulmonary vascular diseases. The underlying etiology remains speculative. In view of the possibility of development of pulmonary hypertension despite a 'protected' pulmonary vasculature, corrective surgery should be contemplated as soon as technically feasible. © World Publishers Incorporated.published_or_final_versio
Gate controlled electronic transport in monolayer MoS2 field effect transistor
published_or_final_versio
Deep Learning networks with p-norm loss layers for spatial resolution enhancement of 3D medical images
Thurnhofer-Hemsi K., López-Rubio E., Roé-Vellvé N., Molina-Cabello M.A. (2019) Deep Learning Networks with p-norm Loss Layers for Spatial Resolution Enhancement of 3D Medical Images. In: Ferrández Vicente J., Álvarez-Sánchez J., de la Paz López F., Toledo Moreo J., Adeli H. (eds) From Bioinspired Systems and Biomedical Applications to Machine Learning. IWINAC 2019. Lecture Notes in Computer Science, vol 11487. Springer, ChamNowadays, obtaining high-quality magnetic resonance (MR) images is a complex problem due to several acquisition factors, but is crucial in order to perform good diagnostics. The enhancement of the resolution is a typical procedure applied after the image generation. State-of-the-art works gather a large variety of methods for super-resolution (SR), among which deep learning has become very popular during the last years. Most of the SR deep-learning methods are based on the min-
imization of the residuals by the use of Euclidean loss layers. In this paper, we propose an SR model based on the use of a p-norm loss layer to improve the learning process and obtain a better high-resolution (HR) image. This method was implemented using a three-dimensional convolutional neural network (CNN), and tested for several norms in order to determine the most robust t. The proposed methodology was trained and tested with sets of MR structural T1-weighted images and showed
better outcomes quantitatively, in terms of Peak Signal-to-Noise Ratio (PSNR) and Structural Similarity Index (SSIM), and the restored and the calculated residual images showed better CNN outputs.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech
High efficiency, low offset voltage InGaP/GaAs power heterostructure-emitter bipolar transistors with advanced thermal management
High efficiency, low offset voltage InGaP/GaAs power heterostructure-emitter bipolar transistors (HEBTs) have been demonstrated. The large signal performance of the HEBTs is characterized. Output power of 0.25 W with power added efficiency (PAE) of 63.5% at 1.9 GHz has been achieved from a 26-finger HEBT with total emitter area of 873.6 μm2. Output power of 1.0 W with PAE of 63% has been obtained from the composition of four above-mentioned power cells at the optimum conditions of impedance matching. The thermal performance of HEBT is presented and the results show better thermal management than conventional HBT. The experimental results demonstrate good power performance and capability of HEBTs.published_or_final_versio
Growth mode and strain evolution during InN growth on GaN(0001) by molecular-beam epitaxy
The plasma-assisted molecular-beam epitaxy technique was used to study the epitaxial growth of InN on GaN. A relationship between film growth mode and the deposition condition was established by combining reflection high-energy electron diffraction (RHEED) and scanning tunneling microscopy (STM). The sustained RHEED intensity oscillations were recorded for 2D growth while 2D nucleation islands were revealed by STM. Results showed less than three oscillation periods for 3 D growth, indicating the Strnski-Krastanov (SK) growth mode of the film.published_or_final_versio
A Novel Test Rig for the Basic Nonlinear Characterization of Bolted Joints
The paper aims at performing a comprehensive experimental study on the peculiar properties of a bolted joint, and investigates the damping induced at different interfaces (between flanges, bolt head/nut and flange, threads) during vibrations. A novel, simplified, single-bolt system joining a two-beam structure is designed and tested. Experimental results under different boundary conditions are presented, and the influence of the harmonic excitation force, as well as the bolt tension, is investigated. The test results show how the contact interface between the clamped flanges plays an important role in terms of frictional damping provided to the system during vibration, while the contact interfaces between the head/nut and flange, and secondarily between the threads, affect the system response at a less, but not negligible, extent. The test setup and test procedure can provide a database to validate single bolt contact models to be included in a more complex structure
- …