Process design for the manufacturing of soft X-ray gratings in single-crystal diamond by high-energy heavy-ion irradiation

Artículo con 9 figurasThis paper describes in detail a novel manufacturing process for optical gratings suitable for use in the UV and soft X-ray regimes in a single-crystal diamond substrate based on highly focused swift heavy-ion irradiation. This type of grating is extensively used in light source facilities such as synchrotrons or free electron lasers, with ever-increasing demands in terms of thermal loads, depending on beamline operational parameters and architecture. The process proposed in this paper may be a future alternative to current manufacturing techniques, providing the advantage of being applicable to single-crystal diamond substrates, with their unique properties in terms of heat conductivity and radiation hardness. The paper summarizes the physical principle used for the grating patterns produced by swift heavy-ion irradiation and provides full details for the manufacturing process for a specific grating configuration, inspired in one of the beamlines at the ALBA synchrotron light source, while stressing the most challenging points for a potential implementation. Preliminary proof-of-concept experimental results are presented, showing the practical implementation of the methodology proposed herein.The authors acknowledge funding support by the following projects: PID2020-112770RB-C22 from the Spanish Ministry of Science and Innovation, TechnoFusión (III)-CM (S2018/EMT-4437) from Comunidad de Madrid (cofinanced by ERDF and ESF), agreement between Community of Madrid and Universidad Autónoma de Madrid (item “Excellence of University Professorate”). M.L.C. acknowledges financial support from the research project “Captacion de Talento UAM” Ref: #541D300 supervised by the Vice-Chancellor of Research of Universidad Autónoma de Madrid (UAM). LOREA beamline at ALBA is a project co-funded by the European Regional Development Fund (ERDF) within the Framework of the Smart Growth Operative Programme 2014-2020. The authors acknowledge the support from The Centro de Microanálisis de Materiales (CMAM)—Universidad Autónoma de Madrid, for the beam time proposal (demonstration of a grating profile for soft X-rays in diamond via ion lithography) with code IuB-005/21, and its technical staff for their contribution to the operation of the accelerator. We also acknowledge P. Olivero for very useful comments on the manuscript draf

Formation of hollow silver nanoparticles under irradiation with ultrashort laser pulses

9 pags., 5 figs.We have studied the formation of cavities in spherical silver nanoparticles embedded in silica, irradiated with fs laser pulses that produce an intense electronic excitation. Experimentally determined aspect ratio, i.e. the ratio between the cavity and nanoparticle size, for hollow structures formed under different irradiation conditions shows a very good agreement with values obtained by means of atomistic simulations. According to the predictions of the atomistic model, one can produce at will hollow silver nanoparticles with cavities of tailored dimensions, having an accurate control. Hence, laser irradiation can be used to control and design the optical response by tuning the localized surface plasmon resonances of the hollow nanoparticles.This work was partially funded by the regional government of Madrid through the TechnoFusion (III)-CM (S2018/EMT-4437) program, co-financed with Structural Funds (ERDF and ESF) and by the Projects PID2019-105325RB-C32 (Radiafus-5), PID2019-105156GB-I00, PID2021- 123228NB-I00 and PDC2022-133788-I00, funded by the Ministerio de Ciencia e Innovación of Spain. This work has also been partially funded by the Eurofusion consortium (EH150531176). JK was supported by the Beatriz Galindo Program (BEAGAL18/00130) from the Ministerio de Educación y Formación Profesional of Spain. This work was partially funded by Comunidad de Madrid through the Convenio Plurianual with Universidad Politécnica de Madrid in its line of action Apoyo a la realización de proyectos de I + D para investigadores Beatriz Galindo, within the framework of V PRICIT (V Plan Regional de Investigación Científica e Innovación Tecnológica). AP and FJV were supported by FONDECYT grant 3190123. MLC was supported by the research project “Captación de Talento UAM” Ref: #541D300 supervised by the Vice-Chancellor of Research of Universidad Autónoma de Madrid (UAM). The research leading to this result has been supported by the RADIATE project under the Grant Agreement 824096 from the EU Research and Innovation programme HORIZON 2020

Three-variable Mahler measures and special values of modular and Dirichlet LL-series

In this paper we prove that the Mahler measures of the Laurent polynomials $(x+x^{-1})(y+y^{-1})(z+z^{-1})+k$, $(x+x^{-1})^2(y+y^{-1})^2(1+z)^3z^{-2}-k$, and $x^4+y^4+z^4+1+k^{1/4}xyz$, for various values of $k$, are of the form $r_1 L'(f,0)+r_2 L'(\chi,-1)$, where $r_1,r_2\in \mathbb{Q}$, $f$ is a CM newform of weight 3, and $\chi$ is a quadratic character. Since it has been proved that these Maher measures can also be expressed in terms of logarithms and $_5F_4$-hypergeometric series, we obtain several new hypergeometric evaluations and transformations from these results

Enhanced aerosol particle growth sustained by high continental chlorine emission in India

Many cities in India experience severe deterioration of air quality in winter. Particulate matter is a key atmospheric pollutant that impacts millions of people. In particular, the high mass concentration of particulate matter reduces visibility, which has severely damaged the economy and endangered human lives. But the underlying chemical mechanisms and physical processes responsible for initiating haze and fog formation remain poorly understood. Here we present the measurement results of chemical composition of particulate matter in Delhi and Chennai. We find persistently high chloride in Delhi and episodically high chloride in Chennai. These measurements, combined with thermodynamic modelling, suggest that in the presence of excess ammonia in Delhi, high local emission of hydrochloric acid partitions into aerosol water. The highly water-absorbing and soluble chloride in the aqueous phase substantially enhances aerosol water uptake through co-condensation, which sustains particle growth, leading to haze and fog formation. We therefore suggest that the high local concentration of gas-phase hydrochloric acid, possibly emitted from plastic-contained waste burning and industry, causes some 50% of the reduced visibility. Our work implies that identifying and regulating gaseous hydrochloric acid emissions could be critical to improve visibility and human health in India

Assessment of plasma chitotriosidase activity, CCL18/PARC concentration and NP-C suspicion index in the diagnosis of Niemann-Pick disease type C: A prospective observational study

Background: Niemann-Pick disease type C (NP-C) is a rare, autosomal recessive neurodegenerative disease caused by mutations in either the NPC1 or NPC2 genes. The diagnosis of NP-C remains challenging due to the non-specific, heterogeneous nature of signs/symptoms. This study assessed the utility of plasma chitotriosidase (ChT) and Chemokine (C-C motif) ligand 18 (CCL18)/pulmonary and activation-regulated chemokine (PARC) in conjunction with the NP-C suspicion index (NP-C SI) for guiding confirmatory laboratory testing in patients with suspected NP-C. Methods: In a prospective observational cohort study, incorporating a retrospective determination of NP-C SI scores, two different diagnostic approaches were applied in two separate groups of unrelated patients from 51 Spanish medical centers (n = 118 in both groups). From Jan 2010 to Apr 2012 (Period 1), patients with =2 clinical signs/symptoms of NP-C were considered ''suspected NP-C'' cases, and NPC1/NPC2 sequencing, plasma chitotriosidase (ChT), CCL18/PARC and sphingomyelinase levels were assessed. Based on findings in Period 1, plasma ChT and CCL18/PARC, and NP-C SI prediction scores were determined in a second group of patients between May 2012 and Apr 2014 (Period 2), and NPC1 and NPC2 were sequenced only in those with elevated ChT and/or elevated CCL18/PARC and/or NP-C SI =70. Filipin staining and 7-ketocholesterol (7-KC) measurements were performed in all patients with NP-C gene mutations, where possible. Results: In total across Periods 1 and 2, 10/236 (4%) patients had a confirmed diagnosis o NP-C based on gene sequencing (5/118 4.2%] in each Period): all of these patients had two causal NPC1 mutations. Single mutant NPC1 alleles were detected in 8/236 (3%) patients, overall. Positive filipin staining results comprised three classical and five variant biochemical phenotypes. No NPC2 mutations were detected. All patients with NPC1 mutations had high ChT activity, high CCL18/PARC concentrations and/or NP-C SI scores =70. Plasma 7-KC was higher than control cut-off values in all patients with two NPC1 mutations, and in the majority of patients with single mutations. Family studies identified three further NP-C patients. Conclusion: This approach may be very useful for laboratories that do not have mass spectrometry facilities and therefore, they cannot use other NP-C biomarkers for diagnosis

Burden and risk factors for Pseudomonas aeruginosa community-acquired pneumonia:a Multinational Point Prevalence Study of Hospitalised Patients

Pseudornonas aeruginosa is a challenging bacterium to treat due to its intrinsic resistance to the antibiotics used most frequently in patients with community-acquired pneumonia (CAP). Data about the global burden and risk factors associated with P. aeruginosa-CAP are limited. We assessed the multinational burden and specific risk factors associated with P. aeruginosa-CAP. We enrolled 3193 patients in 54 countries with confirmed diagnosis of CAP who underwent microbiological testing at admission. Prevalence was calculated according to the identification of P. aeruginosa. Logistic regression analysis was used to identify risk factors for antibiotic-susceptible and antibiotic-resistant P. aeruginosa-CAP. The prevalence of P. aeruginosa and antibiotic-resistant P. aeruginosa-CAP was 4.2% and 2.0%, respectively. The rate of P. aeruginosa CAP in patients with prior infection/colonisation due to P. aeruginosa and at least one of the three independently associated chronic lung diseases (i.e. tracheostomy, bronchiectasis and/or very severe chronic obstructive pulmonary disease) was 67%. In contrast, the rate of P. aeruginosa-CAP was 2% in patients without prior P. aeruginosa infection/colonisation and none of the selected chronic lung diseases. The multinational prevalence of P. aeruginosa-CAP is low. The risk factors identified in this study may guide healthcare professionals in deciding empirical antibiotic coverage for CAP patients